Search

In this article, a new semiquadratic high step-up coupled-inductor dc/dc converter (SQHSUCI) with continuous input current and low voltage stress on semiconductor components is presented. The proposed structure employs a coupled-inductor (CI) and two power switches with simultaneous operation to achieve an extremely high voltage conversion ratio in a semiquadratic form. The voltage stress across the main power switch is clamped by two regenerative clamp capacitors. Here, the switching losses of both MOSFETs have been reduced by applying quasi-resonance operation of the circuit created by the leakage inductance of the CI along with the balancing and clamp capacitors. Therefore, by considering the high gain conversion ratio along with low voltage stress on components, the magnetic and semiconductors losses of the SQHSUCI are reduced significantly. Also, the energy stored in the leakage inductance of CI is recycled to the output capacitor. These features make the proposed SQHSUCI more suitable for industrial applications. The operation principle, steady state, and also comparisons with other related converters in continuous conduction mode (CCM) are discussed in detail. Finally, experimental results of a prototype with 20 V input and 200 W–200 V output at 50 kHz switching frequency, verify the theoretical advantages of the proposed strategy. [ABSTRACT FROM AUTHOR]

This letter proposes a modified Y-source dc–dc converter, which features higher voltage-gains but lower voltage stresses on the components. Moreover, the proposed converter draws a continuous current from the dc input with much control flexibility (i.e., a wide range of adjustable duty cycles). Additionally, the coupled inductors have a low turns ratio, and the core saturation issue is avoided due to the dc-current-blocking capacitor. A detailed analysis of the proposed converter is provided, and the performance is benchmarked with selected coupled-inductors-based converters on various aspects. Experimental tests confirm the theoretical analysis. [ABSTRACT FROM AUTHOR]

This letter proposes a single switch magnetically coupled dc–dc converter with a high voltage gain. The unique features of the converter are summarized as follows: 1) voltage gain of the converters is raised by lowering its magnetic turn ratio; 2) wide control range ($ 0< D< 1$); 3) continuous current from the source that makes it a suitable candidate for renewable energy applications; and 4) there is no dc current saturation in the core due to the presence of capacitor in the primary winding of the inductor. The feasibility of the proposed converter is studied in details supported by circuit analysis and simulation results. Furthermore, the proposed converter is analyzed and compared with other converters with similar features. Finally the superior performance of the circuit is validated experimentally. [ABSTRACT FROM AUTHOR]

In this correspondence, it is shown that there are some problems when an inductive load is considered in Figs. 2–5 of the original paper [1]. The objective of this correspondence is to point out these problems using analysis and detailed computer simulation. [ABSTRACT FROM AUTHOR]

This paper discusses the comments on “A KY Boost Converter”. [ABSTRACT FROM AUTHOR]