Search

A single-bit-line (BL) static RAM (SRAM) circuit that employs adiabatic charging of a word line during a read operation was found to provide a large dynamic noise margin (DNM) for reading. Single-BL reading is achieved by using a left access transistor and a shared reading port. The shared reading port greatly reduces the BL capacitance, enabling the voltage of the BL connected to the low-voltage node of the flip-flop to change from the precharge voltage to GND. An analysis of the time-wise change in DNM revealed that the read noise margin of this circuit was 1.9 times larger than that of a conventional two-BL circuit. This circuit enables the design of an SRAM that is smaller than a conventional one, resulting in lower energy consumption. [ABSTRACT FROM PUBLISHER]

Four definitions of static random access memory (SRAM) cell write margins (WMs) were reexamined by analyzing the dependence of the WM on the SRAM cell transistor threshold voltages (Vth's) in order to find a preferable definition. The WM is expected to obey the normal distribution if the differential coefficients of the WM to Vth's are constant over a wide range of Vth variations. This means that the write yield can be easily predicted by a small number of measured samples. Using SPICE in 45-nm technology, we examined which definition had Vth linearity, as well as giving an accurate write limit. The distribution predicted from the linearity was verified by the Monte Carlo simulation. As a result, the definition proposed by Gierczynski was found to be the most suitable definition for predicting the distribution and the write yield. [ABSTRACT FROM PUBLISHER]