Search

This communication presents the design of a compact loop antenna with independent frequency tuning. The proposed antenna consists of a feed line fed by a $50~\Omega $ coaxial probe and four resonating arms on the adjacent sides of the feed line. The two outer resonating arms are directly coupled to the feed line and the other two inner resonating arms are coupled to the outer arms. The proposed antenna has a footprint of 25 mm $\times 10$ mm $\times0.2$ mm. The designed antenna operates at 0.9, 2.4, 3.5, and 5.5 GHz. Each of these bands is individually tuned using varactor diodes. Thus, the aggregation of these tunable bands provides wide bandwidth. The impedance bandwidth and percentage bandwidth of the antenna are 270/1000/400/700 MHz and 33%/47.6%/11%/12.7%, respectively. Furthermore, the gain and efficiency of the antenna are 1.7/1.3/2.1/2 dBi and 60%/63%/65%/69%, respectively. The prototype antenna is fabricated and tested. The measured impedance and radiation characteristics of the antenna are in good correlation with the simulation results. [ABSTRACT FROM AUTHOR]

A compact, low-profile ultrawideband directional antenna for a wireless body area network (WBAN) is reported in this letter. The directional antenna is designed using a monopole backed with an electromagnetic bandgap (EBG) structure, which acts as a reflector. The beveled Y-shaped monopole antenna covers the ultrawide bandwidth from 3.1 to 10.6 GHz. The monopole antenna backed with a fork-slotted EBG is designed with a size of 8 × 8 mm2. The 2 × 1 EBG array is printed on the same plane above the partial ground. This integrated structure provides band-stop characteristics from 3.1 to 10.6 GHz with a directional radiation pattern intended for wearable applications. It also acts as a protective shield against the electromagnetic radiation emerging from the monopole antenna toward the body tissue. The proposed directional antenna provides a peak gain of 6.25 dBi with high radiation and total efficiency. The calculated specific absorption rate value is 0.695 W/Kg, which is well below the desired 1.6 W/kg. [ABSTRACT FROM AUTHOR]

This communication presents the design, fabrication, and testing of a tunable band-notched UWB filtering antenna. The proposed filtering antenna comprises a semiellipsoid radiator and a microstrip transmission line to cover the UWB communication bandwidth from 3.1 to 10.6 GHz. It also comprises two J-shaped open-ended stubs and an asymmetric T-shaped open-ended stub to create notch bands at 3.5 GHz (WiMAX), 5.2 GHz, and 5.8 GHz (WLAN) in the UWB spectrum. The center frequencies of the notch band are tuned continuously using varactors with percentage tuning of 7.5%, 5.38%, and 3.54%. The prototype is fabricated and experimentally validated. [ABSTRACT FROM AUTHOR]

A compact frequency-agile multiband filtenna is presented in this letter. The proposed reconfigurable filtering antenna performs independent switching between four operating bands viz. 1.8 GHz (GSM), 2.4 GHz (Bluetooth), 3.5 GHz (WiMAX), and 5.2 GHz (WLAN). This switching allows the unused bands to be utilized by the secondary user, making the antenna suitable for cognitive radio applications. An elliptical wideband monopole antenna is excited through a reconfigurable bandpass filter (BPF) integrated onto the 50 Ω transmission line. The BPF comprises four distinct structures to tune to four different frequencies using p-i-n diodes. The proposed filtenna has the reflection coefficient less than −20 dB for all the desired operating bands. Furthermore, this multiband filtenna offers gain of about 1.1, 2.6, 3, and 3.4 dBi at the four frequency bands. The prototype filtenna is fabricated, and the simulation results are verified experimentally. [ABSTRACT FROM AUTHOR]

The design, fabrication, and testing of an integrated polarization diversity antenna array for maximizing the wireless channel link in vehicular networks are presented in this paper. The diversity antenna is constructed using unit cell radiators that provide two operating modes. The mode transition is achieved using a pair of PIN diodes. In one state, the antenna provides multiband operation centered at 2.4, 3.5, and 5.8 GHz. In the other state, the antenna covers the entire ultra-wideband (UWB) spectrum. The unit cell radiators are distributed in the horizontal and vertical plane to achieve polarization diversity. Apart from offering a polarization diversity antenna, the orientation of antennas offers a reliable link with the communication devices. The prototype antenna array is fabricated and tested for diversity performance. The performance metrics such as envelope correlation coefficient, diversity gain, and mean effective gain under isotropic, indoor, and outdoor conditions are evaluated and presented. [ABSTRACT FROM AUTHOR]

This letter presents the design of a novel compound reconfigurable antenna array for WiMAX and WLAN application. The proposed array consists of a unit-cell antenna composed of a truncated circular radiator, C-shaped parasitic elements, and perturbed rhombic slot element. A compound reconfigurable unit-cell antenna element loaded with p-i-n diodes is investigated, and using the inference made, a 1 × 2 array is designed to increase the gain and efficiency of the dynamic antenna. In the first case, slot antenna alone gets excited with the feedlines of 0° and 90° phase difference to achieve pattern and polarization reconfiguration for WiMAX applications. In the other case, the patch is excited at the WLAN band and, with the help of parasitic elements, pattern tilting at 0° and ±30° is obtained. The proposed antenna array is fabricated, and the simulation results are verified using experimental measurements. [ABSTRACT FROM AUTHOR]