Search

This article deals with the problem of electromagnetic source localization (ESL). An evolutionary particle filter, which is first used to make a decision on the positions of electromagnetic sources, has two characteristics. One characteristic is that the number of particles can be significantly reduced while the other characteristic is that the particle diversity can be well improved. On the basis of the estimated positions of electromagnetic sources, the position and velocity of the virtual leader can be determined. Then, an event-based fixed-time consensus control approach is proposed such that the positions and velocities of robots reach consensus with the virtual leader over a fixed-time interval while saving resource consumption by reducing the communication frequencies and updating times of control inputs. Finally, simulation and experimental results show the effectiveness of the proposed decision and event-based fixed-time consensus control approach for ESL. [ABSTRACT FROM AUTHOR]

One open issue of target detection for synthetic aperture radar (SAR) images is the capture effect from the clutter edge and the interfering outliers, including surrounding targets in the multitarget environment, sidelobes, and ghosts. To address this issue, a superpixel-level constant false-alarm rate (CFAR) detector is proposed based on the truncated Gamma statistics for the multilook intensity SAR data. Superpixel segmentation serves as a preprocessing procedure to divide the SAR image into meaningful patches. By automatic clutter truncation in the superpixel-level background clutter window, the real clutter samples are preserved. The experimental results with real SAR images demonstrate that the proposed method achieves better goodness-of-fit performance for the real clutter background with outlier exclusion, yielding a higher target detection rate in the multitarget environments. [ABSTRACT FROM AUTHOR]

On-chip integrated solenoid inductors with nanogranular FeCoTiO magnetic cores have been fabricated. Both single-layered and multilayered magnetic cores with different geometries were studied. An inductance of 14.2 nH was achieved when using a multilayered core structure and keeping the device area of 0.14 mm2. The inductance of the magnetic core inductor is $\sim 14$ times that of the air core inductor, and the quality factor is 7.5. The permeability trends calculated from inductance were compared with the permeability spectra of the patterned FeCoTiO films measured by an improved shorted microstrip transmission line perturbation method. Consistent results have been obtained after considering the demagnetization effect of the magnetic core with high permeability. [ABSTRACT FROM PUBLISHER]