Search

Direct observation of lightning current is a fundamental approach to evaluating lightning parameters, which are among the most basic factors for the lightning protection design of various grounded objects. However, for a tall grounded structure, upward lightning flashes initiated from the top of the structure have usually been observed, and the direct observation results of downward flashes have been limited. We developed and installed a pair of Rogowski coils at Tokyo Skytree, which is a 634-m-high freestanding broadcasting tower in Japan (35.71°N, 139.81°E), and have conducted direct observation of lightning flashes striking the tower. As of November 2018, 70 lightning flashes striking the tower, 26 downward and 44 upward, have been observed since the end of February 2012. In this paper, we focus on the downward negative flashes that occurred at the tower for seven years from 2012 to 2018 and report on the observed results of typical waveform parameters of lightning stroke currents in comparison with other observed results on downward negative flashes. [ABSTRACT FROM AUTHOR]

Observation of lightning current by using Rogowski coils started in February 2012 at Tokyo Skytree, which is a 634-m-high freestanding broadcasting tower. Electromagnetic field waveforms have been also observed by calibrated capacitive antennas at several tens of kilometers from the tower. Simultaneously observed lightning current and electric field waveforms are reproduced by using an electromagnetic model of a return stroke over lossy ground with the help of NEC-4. Lightning channel models with inclination are reconstructed from observed images. Consequently, it turns out that the electromagnetic field waveforms are affected by the geometrical shape of a lightning channel, current refractions in the tower, ground conductivity, and current wave velocity in the lightning channel. NEC-4 is quite useful for such analysis of lightning strokes hitting high structures. [ABSTRACT FROM AUTHOR]

The features of lightning shielding of transmission lines have been calculated using the electrogeometric model (EGM) proposed by Armstrong and Whitehead. Discrepancies, however, have been found in the case of ultra-high voltage (UHV)-designed transmission lines. UHV-designed transmission lines often pass through high-altitude mountain areas, where foggy or rainy conditions are common when there is lightning. While the electrogeometric model determines the striking distance based on the lightning stroke current, environmental conditions, and how they might affect lightning discharge paths, they are not considered. It is possible, therefore, that foggy conditions may cause differences in the performance of transmission-line lightning shielding. This study used scale models of transmission lines for discharge tests with a 1-m air gap and analyzed differences in discharge paths and locations in dry and foggy conditions. The results showed that the polarity of the discharge had a significant influence, but differences in dry and foggy tests were negligible. [ABSTRACT FROM AUTHOR]

The electric geometry model suggested by Armstrong and Whitehead was used to calculate the performance of lightning-shielded transmission lines. However, since the ultra high voltage (UHV) designed transmission lines were brought into 500 kV operation, it has become evident that their actual performance is different from the calculated predictions in terms of their actual faults, lightning observation results, etc. It is thought that the UHV designed transmission lines are subjected to foggy or rainy conditions when lightning strikes, because they often pass through mountainous areas at higher altitudes. However, according to the electric geometry model, the striking distance is determined by the lightning-stroke current value only, and the model does not consider the environment of discharge path for the relevant lightning strokes. These considerations suggest that foggy conditions may affect transmission line lightning shielding performance. In this study, discharge tests were conducted using a scaled-down transmission line with a 5 m air gap. The discharge point to the simulated conductor was analyzed in both dry and foggy conditions. Tests were also conducted with a dc bias applied to the simulated power lines, to take the operating voltage of the lines into consideration. These experiments have shown that the effect of fog on the discharge ratio to the conductors is negligible. [ABSTRACT FROM AUTHOR]

The electrogeometric model (EGM) proposed by Armstrong and Whitehead has been used to calculate the lightning shielding features of transmission lines. While the striking distance equation in the EGM uses the 50% flashover voltage characteristics of negative switching impulses for rod-rod gaps, those characteristics for long air gaps have not been sufficiently examined. The present study has therefore focused on clarifying the 50% flashover characteristics of negative switching impulses for long air gaps. Consequently, saturating characteristics have been obtained for rod-plane gaps compared with almost linear characteristics for rod-rod and rod-conductor gaps. Furthermore, new knowledge was obtained indicating that, for air gaps of around 4 to 5 m, the 50% flashover voltage may possibly be lower for rod-plane gaps than for rod-rod and rod-conductor gaps. [ABSTRACT FROM AUTHOR]

Investigates the sparkover characteristics of external insulation at the entrance of a UHV substation. Use of shielding rings in the study; Observation on the sparkover voltages; Comparison of critical sparkover voltages with rod-rod gaps.

Investigates the incidence of ground lightning between the period of 1992-1995 in Japan. Establishment of the rational insulation design of power transmission systems; Information on lightning location systems in Japan; Description of the dispersion of lightning flash density in Japan; Examination of the relationship between the number of lightning strokes and thunderdays.