Search

This article covers the design methodologies and optimization techniques studied in the performance improvement of line-start permanent magnet synchronous motors (LSPMSMs). LSPMSM performance improvement using design techniques are chiefly limited to either the transient or the steady-state performance improvement, and a focus on only the transient performance improvement may degrade the steady-state performance of the LSPMSM and vice versa. Optimization studies of LSPMSMs can be categorized in terms of optimization aim in three classifications: transient performance improvement, steady-state performance improvement, and simultaneous improvement of both transient and steady-state performances. This study indicates the impact of various variables on the LSPMSM performance improvement. The optimization review shows that starting cage optimization without considering the steady-state characteristics as constraints results in synchronous performance degradation. The steady-state performance optimization with transient characteristics as constraints results in a minor synchronous performance improvement though there is the lowest transient performance sacrifice. Multi-objective optimization, including a transient and a steady-state characteristic as individual objectives, resulted in a more optimum LSPMSM with overall performance improvement. Finally, suggestions for optimization implementation of LSPMSMs are presented for future research work. [ABSTRACT FROM AUTHOR]

In recent years, the permanent magnet vernier machine (PMVM) has attracted much attention in the research community. Many studies have shown that PMVMs possess superior torque density and are suitable for high-torque and low-speed applications. Some of them compared PMVMs with the direct-drive permanent magnet synchronous machines (PMSMs), but these studies focused mainly on sub-kW power levels. There is little work in the literature that conducted the comprehensive evaluation of PMVM technology for more specific applications. This article presents the design optimization of a 15-kW surface-mounted PMVM and its comparison with an equivalent conventional PMSM for wind generator applications. It attempts to objectively weigh the relative merits of the two wind generator systems and outline their respective advantages and disadvantages. For validation purposes, an optimally designed 15-kW PMVM was constructed and experimentally evaluated, which is one of the largest PMVM prototypes ever reported in the literature. It shows that the PMVM can be a competitive alternative to the PMSM for this application. [ABSTRACT FROM AUTHOR]

This paper investigates the use of the Taguchi method for the design of line-start permanent magnet synchronous motors (LS-PMSMs). To address the inherent limitation of the Taguchi method in solving multiresponse optimization problems, an improved regression rate methodology and a weighted factor multiobjective technique are incorporated to form a Taguchi method based multiobjective design framework. To validate the proposed method, a prototype machine has been designed, constructed, and experimentally evaluated. It shows that the proposed method can effectively take into account both steady-state and transient synchronization performances in the design of LS-PMSMs. [ABSTRACT FROM AUTHOR]

Although cogging torque in magnetic gears (MGs) has been studied, the additional degree of freedom inherent to MGs makes it unclear exactly what is defined as the cogging torque of a MG. Although MGs generally have relatively smooth torque transfer characteristics, this paper reveals that when the gear is used in an up-speed configuration, cogging effects may be amplified under startup conditions. This paper distinguishes between two kinds of cogging torque in MGs, termed the synchronous cogging torque and the true cogging torque. Calculation of the true cogging torque is more difficult than the synchronous cogging torque, but an approximation to the true cogging torque can be obtained using the synchronous cogging torque. The theory is verified experimentally and supported further by results from dynamic simulations. The impact on magnetically geared machines is also considered. [ABSTRACT FROM AUTHOR]

It is well known that the Newton–Raphson method is the most popular iterative method for nonlinear finite element problems. The method has a quadratic convergence. Under certain conditions on the Jacobian of the functional and the initial guess the Newton–Raphson method can converge very fast. However, standard evaluation of such Jacobian may not be possible for the solution of nonlinear hysteresis field problems. This is due to the nature of the magnetization curves that may not be differentiable or possess a very steep gradient. In this paper, an alternative finite element implementation using the Newton–Raphson method for hysteresis field problems is described in detail. To improve the convergence of the method, a method for evaluation of the initial guess is also proposed. It is shown that the Newton method can be reliably used for solving hysteresis field problems. [ABSTRACT FROM PUBLISHER]

This paper presents the design and evaluation of a magnetically geared permanent magnet (PM) machine with an inner stator. A brief overview of relevant operating principles is given first. A simplified design and simulation methodology, which can ensure that the magnetic gear and the stator are well matched, is then devised. The method is applied to the design optimization of a small machine resulting in a design with a maximum torque density of 115 kN \,\cdot \,\textm/\textm^\text 3 per active volume. To validate the design, a working prototype has been built and experimentally evaluated. It shows that this computationally efficient design methodology is well suited for the optimization of magnetically geared PM machines. Finally, a method of analyzing the operating points of the machine is described. Relevant conclusions are drawn and recommendations for future work are given. [ABSTRACT FROM AUTHOR]

The simulation of magnetically geared electrical machines using the finite element method is an especially demanding task when movement has to be considered. Several methods that facilitate movement exist. In this paper, two of these methods, the macro air-gap element (AGE) and the moving band (MB) are applied in a time-stepped static simulation of a magnetically geared machine (MGM). The methods are evaluated in terms of accuracy and computational efficiency, vitally important factors for numerical optimization. The implementation of both methods exploit the multi-core architecture of modern CPUs to solve several steps in parallel, drastically reducing the simulation time. Nevertheless, the computational cost of the AGE is prohibitively high in the simulation of MGMs. The MB is computationally efficient and good accuracy can be achieved using a multilayer approach. [ABSTRACT FROM PUBLISHER]

This paper describes a hybrid method for calculating the performance of a coreless stator axial flux permanent-magnet (AFPM) generator. The method uses a combination of finite-element analysis and theoretical analysis. The method is then incorporated into a multidimensional optimization procedure to optimally design a large power coreless stator AFPM generator. The measured performance of the manufactured prototype compares favorably with the predicted results. The design approach can be applied successfully to optimize the design of the coreless stator AFPM machine. [ABSTRACT FROM AUTHOR]

This paper presents a hybrid method for the calculation of eddy current loss in coreless stator axial field permanent- magnet (AFPM) machines. The method combines the use of two-dimensional finite element (FE) field analysis and the closed-form eddy loss formula. To account for three-dimensional field effects in an AFPM machine, a multilayer and multislice modeling technique has been devised. Experimental tests are carried out to validate the method. It is shown that the proposed method predicts the eddy current losses of a coreless stator AFPM machine with high accuracy. [ABSTRACT FROM AUTHOR]