Search

In this article, a leaf spring insertion to the stator back iron is proposed to reduce vibration and acoustic noise in a switched reluctance machine (SRM). The back iron of the tooth tip is curved out and the material made up of carbon spring steel is placed to dampen the vibration due to radial force. A 6/4 stator/rotor pole SRM is designed and its natural vibration mode frequencies are determined through finite-element analyses. The optimal current waveform is applied to the SRM model using the multidisciplinary coupled simulation method to determine the radial force with the harmonic orders. In the final step, the proposed leaf spring architecture is optimized to achieve the most dampening for the effective radial force harmonic orders. The simulation and experimental results confirmed the effectiveness of the leaf spring insertion in reducing the noise and vibration in SRMs. [ABSTRACT FROM AUTHOR]

Multiphysics analysis and experimental validation of acoustic noise reduction in a high pole count, high power, switched reluctance machine (SRM), through skewing are explored in detail in this work. An iterative optimization strategy covering electromagnetic, structural, and thermal domains is proposed to investigate the effect of different skewing methods and angles on a 24-stator slot/16-rotor pole (24/16) SRM rated at 100 kW. The contributions of this work are twofold. First, electromagnetic impact, considering average torque, torque ripple, radial and tangential air gap forces, of symmetric and asymmetric skewing on stator and rotor is studied in this work. Second, the impact of skewing methods on acoustic noise and vibration performance is studied and presented in detail. The study reveals that skewing both the stator and rotor by the same amount has superior electromagnetic performance over other types of skewing. Multiphysics simulations conducted, predict a 10.5 dBA reduction in the acoustic noise, compared to a baseline design with no skew, for an optimized rotor-stator skewing angle of 13.75°. Finally, 100 kW prototypes of the baseline and the optimized skewed SRM were constructed and subjected to wide speed range testing. Simulation and test results closely follow each other and validate the effectiveness of the proposed skew design in mitigating acoustic noise and vibration in high pole count SRMs. [ABSTRACT FROM AUTHOR]

Switched reluctance machines (SRMs) have been studied by many researchers as an alternative to the other types of electrical machines for use in electric and hybrid vehicle applications. SRMs are fault tolerant and have wide speed operating range. However, they suffer from several disadvantages, including high vibration, acoustic noise, and torque ripple. In this article, the placement of rectangular windows in both the rotor and stator poles is proposed to reduce the vibration and acoustic noise of SRMs. An iterative optimization algorithm in a wide speed range of operation using finite-element analysis (FEA) tools provides the best position and dimension of window design parameters. Multiphysics FEA is also performed to predict the vibration and acoustic noise of the optimized design. The results of this study present that placing windows in both the stator and rotor of the SRMs can significantly reduce the acoustic noise compared with the baseline SRMs. Based on the simulation results, the optimum design has been constructed as a prototype and tested in a wide speed operating condition. The simulation and experimental test validation results prove the effectiveness of the proposed design in mitigating the acoustic noise and vibration. [ABSTRACT FROM AUTHOR]

This paper investigates the operating modes and converter options of dual winding permanent magnet synchronous machines (DWPMSMs) that are used to drive accessories in hybrid electric vehicles. In this application, DWPMSM operate in three different modes: 1) motor-only; 2) generator-only; and 3) simultaneous motor–generator modes. Motor-only and generator-only operations can be treated independently as long as two winding sets are magnetically decoupled. Simultaneous motor–generator mode links two winding sets through a mechanical shaft. As part of this study, the impact of dual winding set usage on the machine's output and performance is also investigated. Experimental results are given for each mode. The converter options of generator winding were investigated as well. These options include uncontrolled rectifier with dc–dc converter and controlled rectifier. Two converters are compared for their impacts on efficiency and generator current harmonics. The relationship between speed and converter control variable is given for various back electromotive force constant values of the DWPMSM. [ABSTRACT FROM AUTHOR]