Search

Intravascular ultrasound (IVUS) has been frequently used for coronary artery imaging clinically. More importantly, IVUS is the fundamental image modality for most advanced multimodality intravascular imaging techniques, since it provides a more comprehensive picture of vessel anatomy on which other imaging data can be superimposed. However, image quality in the deeper region is poor because of the downgraded lateral resolution and contrast-to-noise ratio (CNR). In this paper, we report on the application of an ultrasound beamforming method that combines virtual source synthetic aperture (VSSA) focusing and coherence factor weighting (CFW) to improve the IVUS image quality. The natural focal point of conventional IVUS transducer was treated as a virtual source that emits spherical waves within a certain region. Mono-static synthetic aperture focusing was conducted to achieve higher resolution. Coherence factor was calculated using delayed RF signals and applied to the synthesized beam to increase the CNR and focusing quality. The proposed method was tested through simulations in Field II and imaging experiments in both linear and rotational scans. The lateral resolution for linear scan mode is improved from 165–524 to 126–143 \mu m ; resolution for rotational scan mode improves by up to 42%. CNR improvement by up to 1.5 was observed on the anechoic cysts of different sizes and at different locations. Herein, it is demonstrated that the beamforming method, which combines VSSA and CFW, can significantly improve the IVUS image quality. This approach can be readily integrated into the current IVUS imaging system for enhanced clinical diagnosis. [ABSTRACT FROM PUBLISHER]

Acute coronary syndrome (ACS) is frequently associated with the sudden rupture of a vulnerable atherosclerotic plaque within the coronary artery. Several unique physiological features, including a thin fibrous cap accompanied by a necrotic lipid core, are the targeted indicators for identifying the vulnerable plaques. Intravascular ultrasound (IVUS), a catheter-based imaging technology, has been routinely performed in clinics for more than 20 years to describe the morphology of the coronary artery and guide percutaneous coronary interventions. However, conventional IVUS cannot facilitate the risk assessment of ACS because of its intrinsic limitations, such as insufficient resolution. Renovation of the IVUS technology is essentially needed to overcome the limitations and enhance the coronary artery characterization. In this paper, a multi-frequency intravascular ultrasound (IVUS) imaging system was developed by incorporating a higher frequency IVUS transducer (80 to 150 MHz) with the conventional IVUS (30?50 MHz) system. The newly developed system maintains the advantage of deeply penetrating imaging with the conventional IVUS, while offering an improved higher resolution image with IVUS at a higher frequency. The prototyped multifrequency catheter has a clinically compatible size of 0.95 mm and a favorable capability of automated image co-registration. In vitro human coronary artery imaging has demonstrated the feasibility and superiority of the multi-frequency IVUS imaging system to deliver a more comprehensive visualization of the coronary artery. This ultrasonic-only intravascular imaging technique, based on a moderate refinement of the conventional IVUS system, is not only cost-effective from the perspective of manufacturing and clinical practice, but also holds the promise of future translation into clinical benefits. [ABSTRACT FROM AUTHOR]

When this paper was submitted for publication (T. Ma, et al) "Multifrequency intravascular ultrasound (IVUS) imaging," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 62, no. 1, pp. 97?107, Jan. 2015), c-authors Jiawen Li and Chelsea E. Munding were erroneously omitted. [ABSTRACT FROM AUTHOR]

Objective: Superharmonic contrast-enhanced ultrasound imaging, also called acoustic angiography, has previously been used for the imaging of microvasculature. This approach excites microbubble contrast agents near their resonance frequency and receives echoes at nonoverlapping superharmonic bandwidths. No integrated system currently exists could fully support this application. To fulfill this need, an integrated dual-channel transmit/receive system for superharmonic imaging was designed, built, and characterized experimentally. Method: The system was uniquely designed for superharmonic imaging and high-resolution B-mode imaging. A complete ultrasound system including a pulse generator, a data acquisition unit, and a signal processing unit were integrated into a single package. The system was controlled by a field-programmable gate array, on which multiple user-defined modes were implemented. A 6-, 35-MHz dual-frequency dual-element intravascular ultrasound transducer was designed and used for imaging. Result: The system successfully obtained high-resolution B-mode images of coronary artery ex vivo with 45-dB dynamic range. The system was capable of acquiring in vitro superharmonic images of a vasa vasorum mimicking phantom with 30-dB contrast. It could detect a contrast agent filled tissue mimicking tube of 200 μm diameter. Conclusion: For the first time, high-resolution B-mode images and superharmonic images were obtained in an intravascular phantom, made possible by the dedicated integrated system proposed. The system greatly reduced the cost and complexity of the superharmonic imaging intended for preclinical study. Significant: The system showed promise for high-contrast intravascular microvascular imaging, which may have significant importance in assessment of the vasa vasorum associated with atherosclerotic plaques. [ABSTRACT FROM PUBLISHER]