Search

This paper presents a new overall control strategy for small-scale wind energy conversion systems (WECS). The purpose of the proposed strategy is to utilize a maximum power point tracking control (MPPT) to maximize the captured energy when the wind speeds are below the rated speed. For high wind speed region; two stall controllers are developed: The constant speed stall controller which will limit the rotational speed of the generator to its rated value, and the constant power stall controller, which will regulate the captured power to be within the system rating. For the MPPT control, a modified perturb and observe (P&O) algorithm is utilized, where the dc side current is used as a perturbation variable and the dc-link voltage slope information is used to enhance the tracking speed and stability of the algorithm. For the speed and power regulation operation during high wind speeds, the system is controlled in the stall region to limit the rotational speed and the power of the generator. A stabilizing control loop is proposed to compensate for the stall region instability. A new mode transfer control strategy is developed to effectively control the transition between different modes of operation while ensuring the system stability without using any preknowledge of the system parameters. A 1 kW hardware prototype is developed and tested to validate the proposed new control strategy. [ABSTRACT FROM PUBLISHER]

This paper proposes a maximum power point tracking (MPPT) algorithm for small-scale wind energy conversion systems. The proposed algorithm uses the dc current as the perturbing variable. The algorithm detects sudden wind speed changes indirectly through the dc-link voltage slope. The voltage slope is also used to enhance the tracking speed of the algorithm and to prevent the generator from stalling under rapid wind speed slowdown conditions. The proposed method uses two modes of operation: A perturb and observe (P&O) mode with adaptive step size under slow wind speed fluctuation conditions, and a prediction mode employed under fast wind speed change conditions. The dc-link capacitor voltage slope reflects the acceleration information of the generator, which is then used to predict the next step size and direction of the current command. The proposed algorithm shows enhanced stability and fast tracking capability under both high and low rate of change wind speed conditions and is verified using a 1.5 kW prototype hardware setup. [ABSTRACT FROM AUTHOR]