Search

The deployer uses a voice coil actuator (VCA) to control precisely the separation velocity of CubeSats with different masses. This article proposes a novel VCA with a new structure of double magnetic circuits featuring high thrust density. Unlike the conventional design, the new design achieves high thrust density by using a new structure of double magnetic circuits to concentrate the magnetic flux in the airgap and alleviate the magnetic saturation in the yoke. An improved equivalent magnetic circuit is developed to reveal the performance improvement of the novel VCA. The electromagnetic characteristics of the new VCA are investigated and compared with the conventional counterparts by finite element analysis and experimental tests. One VCA deployer prototype has been fabricated and testedexperimentally to validate the thrust density and separation characteristics. [ABSTRACT FROM AUTHOR]

This paper proposes a new induction heating (IH) coil using Halbach-arranged coils for cooktop. In general, a control inverter is placed on the back side of the coil, but by using the Halbach array coils, magnetic flux leakage to the back of the coil can be prevented without using a ferrite cores for magnetic shielding. Further, the magnetic flux can be concentratedly linked to the pot. First, differences and advantages of the magnetic flux distribution between the conventional IH-coil and the proposed IH-coil will be described based on electromagnetic field analysis. Next, the results of verification of the effect of the Halbach array coil via the prototype for principle verification are demonstrated.

This paper presents the study of a novel bar-shaped magnetic shielding for magnetoresistive (MR) sensors in current measurement on printed circuit boards (PCB). The main physical principles of the shielding effect were studied by using the analytical model of magnetic flux concentration. Finite element analysis (FEA) simulations were used to simulate the shielding effects with changing geometrical parameters of the bar-shaped magnetic shielding. The dependences of the shielding effect on the parameters of length, width and thickness were analyzed. It shows that these parameters are critical for designing magnetic shielding. This new concept of magnetic shielding for MR sensors in current measurement on PCB was experimentally tested and verified in a laboratory setup. The experimental results verify the feasibility and effect of this novel magnetic shielding for MR sensors. [ABSTRACT FROM PUBLISHER]

The performance of a flux concentrator using an YBCO oxide superconductor was tested to raise the steady state magnetic field generated by the existing magnet. This concentrator was composed of an outside hollow cylinder and a pair of half cylinders that goes in and out in the outside cylinder. This flux concentrator generated additional magnetic field more than 1.6 T for an applied magnetic field 28 T. [ABSTRACT FROM AUTHOR]