Search

This article presents a two-times interleaved, loop-unrolled SAR analog-to-digital converter (ADC) operational from 300 down to 4.2 K. The 6-8-bit resolution and the sampling speed up to 1 GS/s are targeted at digitizing the multi-channel frequency-multiplexed input in a spin-qubit reflectometry readout for quantum computing. To optimize the circuit for the altered device behavior at cryogenic temperatures, a modified common-mode switching scheme is adopted as well as a flexible calibration. The design is implemented in 40-nm CMOS technology and achieves 36.2-dB signal to noise and distortion ratio (SNDR) for Nyquist input at 4.2 K while maintaining a Walden figure of merit (FOMW) of 200 pJ/conv-step (for a 10.8-mW power consumption), including the clock receiver, and 15 pJ/conv-step (for a 0.8-mW power consumption) for just the core ADC. With these specifications, the ADC can support the simultaneous readout of 20 qubit channels with a power consumption of 0.5 mW/qubit, thus advancing toward the full integration of the cryogenic readout for future large-scale quantum processors.

In this article, a cryo-CMOS receiver integrated with a frequency synthesizer for scalable multiplexed readout of qubits is presented, focusing on radio frequency (RF) reflectometry readout of silicon-based semiconductor spin qubits/quantum dots. The proposed spin qubit readout chip consists of a wideband low noise amplifier (LNA), a quadrature mixer, a complex filter, a pair of in-phase/quadrature (I/Q) intermediate frequency (IF) amplifier chains, and a type-II charge-pump phase-locked loop (PLL) with a programmable frequency divider providing local oscillator (LO) signals. Noise optimizations are applied to the LNA design and the quadrature active mixer design to obtain the required performance. A mode-switching complementary voltage-controlled oscillator (VCO) is proposed to achieve low-power and low-phase noise in a wide-frequency tuning range (46.5%). Circuit modifications and design considerations for robust cryogenic temperature operation are presented and discussed. Measurements show that the receiver provides an average gain of 65 dB, a minimum noise figure of 0.5 dB, an IF bandwidth of 0.1-1.5 GHz, and an image rejection ratio of 23 dB at 3.5 K with a power consumption of 108 mW. This cryo-CMOS receiver with frequency synthesizer for spin qubit readout is a first step toward fully-integrated qubit readout and control.

This paper presents a device matching study of a commercial 40-nm bulk CMOS technology operated at cryogenic temperatures. Transistor pairs and linear arrays, optimized for device matching, were characterized over the temperature range from 300 K down to 4.2 K. The device parameters relevant for mismatch, i.e., the threshold voltage and the current factor, were extracted, from which the change in both absolute value and variability as a function of temperature and device size were investigated. It is shown that the Pelgrom scaling law is valid also at 4.2 K and that the simplified Croon model is able to accurately predict drain-current mismatch from moderate to strong inversion over the entire temperature range. Additionally, the characterization of linear device arrays shows exacerbated edge-effects at extremely low temperatures, thus requiring the addition of dummy devices at the array boundary. The result of this study is the first model capable of predicting mismatch over a wide range of operating regions and temperatures.