Search

The aim of the present study was to develop and evaluate positively charged nanoparticles of aceclofenac for ocular delivery. The nanoparticles were prepared by the nanoprecipitation method using Eudragit RS 100. The optimized nanoparticles were found to have narrow particle size range (238.9 ± 8 nm) with nearly spherical shape, positive zeta potential (40.3 ± 3.8). Higher entrapment efficiency of aceclofenac (94.53 ± 1.0%) with prolonged in vitro drug release profiles was also observed. Powder X-ray diffraction and differential scanning calorimetry studies indicated decrease in crystallinity of drug within the nanoparticulate polymeric matrix. The formulation was found to have higher permeation as compared to aceclofenac aqueous solution. Nanoparticle formulation was found to be quite stable and well tolerated with no signs of corneal damage. The in vivo studies involving the arachidonic acid-induced ocular inflammation in rabbits showed optimal efficacy of the nanoparticles with significantly higher inhibition of polymorphonuclear leukocytes migration (p < 0.05) and lid closure scores.

Ocular inflammatory diseases, such as uveitis, scleritis, episcleritis and dry eye syndrome are commonly treated with eye drop formulations. In the present study, attempts were made to prepare aceclofenac oil formulations to evaluate its transcorneal permeation and anti-inflammatory effect. Ophthalmic solutions of aceclofenac with or without (0.5% v/v) benzyl alcohol were formulated in different vegetable oils and permeation studies were carried out. Aceclofenac ophthalmic solution in linseed oil containing benzyl alcohol exhibited maximum permeation (4.42% in goat, 4.26% in sheep and 3.94% in buffalo) through corneas under study. The partition characteristics of aceclofenac in linseed oil reinforced the results of permeation studies. The optimized formulation (linseed oil containing benzyl alcohol) showed better stability profile. Linseed oil aceclofenac formulation showed significant inhibitory effect on ocular inflammation induced by arachidonic acid in rabbit eyes (p < .05) and hence it can be considered as a potential approach for treatment of ocular inflammatory conditions.

Colon-targeted microparticles loaded with a model anti-inflammatory drug were fabricated using especially designed acrylic acid-butyl methacrylate copolymers. Microparticles were prepared by oil-in-oil solvent evaporation method using Span 80 as emulsifier. Microparticles were found to be spherical in shape, hemocompatible and anionic with zeta potential of -27.4 and -29.0 mV. Entrapment of drug in the microparticles was confirmed by Fourier transform infrared (FTIR) spectroscopy. However, X-ray diffraction (XRD) and differential scanning calorimetry (DSC) revealed amorphous nature of microparticles due to the dilution effect of amorphous polymer. The microparticles released less than 5% drug at pH 1.2, while more than 90% of the drug load was released at pH 7.4. This suggested the colon targeting nature of the formulations. In experimentally developed colitis in Wistar rats, the microparticle formulation showed significant reduction (p < .05) in the disease activity score (disease symptoms), the colon-to-body weight ratio (tissue edema) and the myeloperoxidase, tumor necrosis factor (TNF)-α and interleukin (IL)-1β activities.

In the current study, polylactide-co-glycolide (PLGA) nanoparticles entrapping both clozapine (CLZ) and risperidone (RIS) were formulated by spray-drying using Buchi Nano Spray Dryer B-90 (Flawil, Switzerland). Parameters such as inlet temperature, spray mesh diameter, sample flow rate, spray rate and applied pressure were optimized to produce nanoparticles having desired release profile using both low- and high-molecular weight PLGA polymer. Smallest size nanoparticle of size around 248 nm could be prepared using a 4.0 μm mesh diameter with low-molecular weight polymer. The load of CLZ and RIS was 126.3 and 58.2 μg/mg of polymer particles, respectively. Entrapment efficiency of drugs in PLGA nanoparticles was 94.74% for CLZ and 93.12% for RIS. Both the drugs released continuously from the nanoparticle formulations. PLGA nanoparticles formulated using low-molecular weight polymer released around 80% of the entrapped drug over 10 days of time. Nature of drug inside polymer particles was amorphous, and there was no chemical interaction of CLZ and RIS with polymer. Polymeric nanoparticles were found to be non-toxic in nature using PC12 cell line. This nanospray drying process proved to be suitable for developing polymeric nanoformulation delivering dual drugs for the treatment of Schizophrenia.

The purpose of this study was to investigate the feasibility of entrapping water-insoluble drug itraconazole into solid lipid nanoparticles (SLNs) for topical ocular delivery. The drug-loaded SLNs were prepared from stearic acid and palmitic acid using different concentrations of polyvinyl alcohol employed as emulsifier. SLNs were prepared by the melt-emulsion sonication and low temperature-solidification method and characterized for particle size, zeta potential, drug loading and drug entrapment efficiency. The mean particle size of SLNs prepared with stearic acid ranged from 139 to 199 nm, while the SLNs prepared with palmitic acid had particle size in the range of 126-160 nm. The SLNs were spherical in shape. Stearic acid-SLNs showed higher entrapment of drug compared with palmitic acid-SLNs. Differential scanning calorimetry (DSC) and X-ray diffraction measurements showed decrease in crystallinity of drug in the SLN formulations. The modified Franz-diffusion cell and freshly excised goat corneas were used to test drug corneal permeability. Permeation of itraconazole from stearic acid-SLNs was higher than that obtained with palmitic acid-SLNs. The SLNs showed clear zone of inhibition against Aspergillus flavus indicating antimicrobial efficacy of formulations.

Enteric submicron particles (SPs) formulations of α-amylase were prepared by w/o/w emulsion solvent evaporation using hydroxypropyl methylcellulose phthalate (HPMCP) and Eudragit L 100, to avoid gastric inactivation of α-amylase. Smaller internal and external aqueous phase volume provided maximum encapsulation efficiency (71.92-73.40%), least particle size (546.4-595.4 nm) and 23-26% loss of enzyme activity. Release studies in 0.1 N HCl confirmed the gastro-resistance of formulations. The anionic SPs aggregated in 0.1 N HCl (i.e. gastric pH 1.2), due to protonation of carboxylic groups of enteric polymer. The aggregates being < 500 µm size would not impede gastric emptying. However, at pH >5.0 (duodenal pH), SPs showed de-aggregation due to restoration of surface charge. HPMCP and Eudragit L 100 SPs facilitated almost complete release of α-amylase within 30 min at pH 6.0 and 6.8, respectively, following Higuchi kinetics. PXRD and DSC indicated amorphous character and scanning electron microscope showed spherical shape of SPs. In simulated gastro-intestinal pH condition, HPMCP and Eudragit L 100 SPs showed good digestion of cooked rice and could serve as potential carrier for oral enzyme delivery. Stability studies indicated the formulations as quite stable to ensure 2 years shelf life at room temperature.

Introduction: Eudragit is the brand name for a diverse range of polymethacrylate-based copolymers. It includes anionic, cationic, and neutral copolymers based on methacrylic acid and methacrylic/acrylic esters or their derivatives., Areas Covered: In this review, the physicochemical characteristics and applications of different grades of Eudragit in colon-specific/enteric-coated/sustained release drug delivery and taste masking have been addressed., Expert Opinion: Eudragits are amorphous polymers having glass transition temperatures between 9 to > 150(o)C. Eudragits are non-biodegradable, nonabsorbable, and nontoxic. Anionic Eudragit L dissolves at pH > 6 and is used for enteric coating, while Eudragit S, soluble at pH > 7 is used for colon targeting. Studies in human volunteers have confirmed that pH drops from 7.0 at terminal ileum to 6.0 at ascending colon, and Eudragit S based systems sometimes fail to release the drug. To overcome the shortcoming, combination of Eudragit S and Eudragit L which ensures drug release at pH < 7 has been advocated. Eudragit RL and RS, having quaternary ammonium groups, are water insoluble, but swellable/permeable polymers which are suitable for the sustained release film coating applications. Cationic Eudragit E, insoluble at pH ≥ 5, can prevent drug release in saliva and finds application in taste masking.

In this study, diclofenac-loaded Eudragit S100-based nanosuspension was prepared by nanoprecipitation method and characterised for particle size, morphology, in vitro release, and for its in vivo ocular anti-inflammatory activity. The diclofenac-loaded Eudragit S100 nanosuspension was found to have a particle size of 172 nm, polydispersibility index of 0.14 and zeta potential of -23.7 +/- 6.07 mV, indicating that the nanosuspension is fairly stable. The nanosuspended particles were found to be spherical in shape. The nanosuspension was found to provide a sustained in vitro release, following the Higuchi square-root release kinetics. The results indicated that the nanosuspension released the drug by combination of dissolution and diffusion. The in vivo evaluation of nanosuspension in PGE(2)-induced ocular inflammation in rabbit model revealed a significantly (p  <  0.05) higher inhibition of PGE(2)-induced polymorphonuclear leukocytes migration and lid-closure scores as compared with the aqueous solution of diclofenac.