Search

A swellable/erodible system for oral time-dependent release, demonstrated to provide consistent pulsatile and colonic delivery performance, has been manufactured through a range of coating techniques to achieve the functional hydroxypropyl methylcellulose (HPMC) layer. Although aqueous spray-coating has long been preferred, the processing times and yields still represent open issues, especially in view of the considerable amount of polymer required to give in vivo lag phases of proper duration. To make manufacturing of the delivery system more cost-efficient, different coating modes were thus evaluated, namely top and tangential spray-coating as well as powder-layering, using a fluid bed equipment. To this aim, disintegrating tablets of 5 mm in diameter, containing a tracer drug, were coated up to 50% weight gain with low-viscosity HPMC, either as a water solution or as a powder formulation. In all cases, process feasibility was assessed following setup of the operating conditions. Irrespective of the technique employed, the resulting dosage forms exhibited uniform coating layers able to defer the onset of release as a function of the amount of polymer applied. The structure and thickness of such layers differed depending on the deposition modes. With respect to top spray-, both tangential spray-coating and powder-layering were shown to remarkably ameliorate the process time, which was reduced to approximately 1/3 and 1/6, and to enhance the yield by almost 20 and 30%, respectively. Clear advantages associated with such techniques were thus highlighted, particularly with respect to powder-layering here newly proposed for application of a swellable hydrophilic cellulose derivative.

Dry coating techniques enable manufacturing of coated solid dosage forms with no, or very limited, use of solvents. As a result, major drawbacks associated with both organic solvents and aqueous coating systems can be overcome, such as toxicological, environmental, and safety-related issues on the one hand as well as costly drying phases and impaired product stability on the other. The considerable advantages related to solventless coating has been prompting a strong research interest in this field of pharmaceutics. In the article, processes and applications relevant to techniques intended for dry coating are analyzed and reviewed. Based on the physical state of the coat-forming agents, liquid- and solid-based techniques are distinguished. The former include hot-melt coating and coating by photocuring, while the latter encompass press coating and powder coating. Moreover, solventless techniques, such as injection molding and three-dimensional printing by fused deposition modeling, which are not purposely conceived for coating, are also discussed in that they would open new perspectives in the manufacturing of coated-like dosage forms.

Dry coating is an innovative powder-layering technique that enables the formation of coatings on solid dosage forms with no need for using water or organic solvents. This technique envisages the distribution of polymer powder blends onto substrate cores and the concurrent or alternate nebulization of liquid plasticizers. In this work, a dry coating process based on hydroxypropyl methylcellulose acetate succinate (HPMCAS) was set up in a rotary fluid bed equipment to prepare enteric-coated soft gelatin capsules. Promising results were obtained in terms of process feasibility and product characteristics, thus suggesting the possibility of advantageous applications for the investigated technique when dealing with gelatin capsule substrates.