Search

Reverse electrodialysis (RE) is a promising technology for electric power generation from controlled mixing of two differently concentrated salt solutions, where ion-exchange membranes are adopted for the generation of ionic currents within the system. Channel geometry strongly influences fluid flow and thus crucial phenomena such as pressure drop and concentration polarization. Profiled membranes are an alternative to the more commonly adopted net spacers and offer a number of advantages: avoiding the use of non-conductive and relatively expensive materials, reducing hydraulic losses and increasing the active membrane area. In this work, Computational Fluid Dynamic simulations were performed to predict the fluid flow and mass transfer behaviour in channels with profiled membranes for RE applications. In particular, channels equipped with pillars were simulated. The influence of channel geometry on fluid flow and concentration polarization was assessed by means of a parametric analysis for different profile geometries. The unit cell approach along with periodic boundary conditions was adopted to simulate fully developed boundary conditions. Transport equations, valid also for concentrated solutions, were obtained from the rigorous Stefan–Maxwell equation along with the assumptions of binary electrolyte and local electroneutrality. Simulation results show that, in the geometries investigated here, the pumping power consumption is much lower than in a conventional net spacer and very close to that of the empty channel, while calm zones are generated by the profiles, which may accentuate polarization phenomena.

Technologies for the exploitation of renewable energies have been dramatically increasing in number, complexity and type of source adopted. Among the others, the use of saline gradient power is one of the latest emerging possibilities, related to the use of the osmotic/chemical potential energy of concentrated saline solutions. Nowadays, the fate of this renewable energy source is intrinsically linked to the development of the pressure retarded osmosis and reverse electrodialysis technologies. In the latter, the different concentrations of two saline solutions is used as a driving force for the direct production of electricity within a stack very similar to the conventional electrodialysis ones. In the present work, carried out in the EU-FP7 funded REAPower project, a multi-scale mathematical model for the Salinity Gradient Power Reverse Electrodialysis (SGP-RE) process with seawater and concentrated brines has been developed. The model is based on mass balance and constitutive equations collected from relevant scientific literature for the simulation of the process under extreme conditions of solutions concentration. A multi-scale structure allows the simulation of the single cell pair and the entire SGP-RE stack. The first can be seen as the elementary repeating unit constituted by cationic and anionic membrane and the relevant two channels where dilute and concentrate streams flow. The reverse electro-dialysis stack is constituted by a number of cell pairs, the electrode compartments and the feed streams distribution system. The model has been implemented using gPROMS , a powerful dynamic modelling process simulator. Experimental information, collected from the FUJIFILM laboratories in Tilburg (the Netherlands), has been used to perform the tuning of model formulation and eventually to validate model predictions under different operating conditions. Finally, the model has been used to simulate different possible scenarios and perform a preliminary analysis of the influence of some process operating conditions on the final stack performance.