Search

In AlGaN/GaN high electron mobility transistors (HEMTs), high temperature processes (such as ohmic annealing with >800°C value) could deform the crystal structure and induce trap states within the bulk and surface. Expanded defect densities cause crucial problems, such as threshold voltage ( Vth ) instability, current collapse, and high leakages. In this work, a low temperature ohmic contact process (630°C, 10 minutes) is adopted with recess etch, and contact resistances

In this article, heat generation distribution and maximum device temperature of gallium-nitride (GaN) high-electron-mobility transistors (HEMTs) are investigated by using the 2-D electrothermal and finite-element method (FEM) simulations. Devices with different gate lengths and source-to-drain spacing are investigated. It is observed that the maximum device temperature (TMAX) depends on the drain-to-source spacing and is almost independent of the gate length and that the assumption of a uniform heat generation region, under the gate, is not accurate; this is contrary to conventional calculation methods. Moreover, based on the results, a new approximation is proposed to use in the FEM simulations that can estimate TMAX more accurately. This method does not require physics-based technology computer-aided design (TCAD) simulations and can work with a low mesh density. The performance is compared with prior methods. This work was supported by Turkish Scientific and Technological Research Council, TUBITAK, under 1501 project GaNTURK. The work of Ekmel Özbay was supported in part by the Turkish Academy of Sciences.