Search

Objective Fracture network analysis plays an important role in oil and gas exploration and development. However, complexity analysis of tight sandstone fracture networks and their control factors is relatively lagging. Based on an experimental study of the dynamic evolution of the complex fracture network in tight sandstone, the fractal and multifractal spectral characteristics of the fracture network were defined, and the complexity and main controlling factors of the fracture network were analyzed. Fracture network complexity analysis of tight sandstone plays an important role in hydraulic fracturing optimization, fracture network prediction, and fracture modeling. Methods Rock mechanics and X-ray computed tomography scan experiments determined the characteristics of rock mechanics and fracture networks . The microstructure and fracture network fractal characteristics of tight sandstone were quantitatively characterized by SEM and fracture network fractal analysis. Results The results showed that the quartz content of tight sandstone ranges from 28.08 to 52.88%, clay content ranges from 11.54 to 25.45%, particle size ranges from 61.18 to 184.55 μm, and porosity ranges from 8.125 to 10.296%. Uniaxial compressive strength ranges from 69.09 to 188.33 MPa, and the elastic modulus ranges from 31.69 to 92.76 GPa. The fractal dimension (DB) ranges from 1.28 to 2.35 and average spectral width (Δα) ranges from 1.0851 to 1.3638. Conclusion The initiation and propagation of fractures extend through the entire stress–strain process. The complexity of the fracture network of tight sandstone is mainly controlled by microscopic fabric characteristics, and has obvious confining pressure as well as scale effects. The DB of the three-dimensional fracture network and average Δα of the multifractal spectrum represents the complexity and heterogeneity of the fracture spatial distribution, respectively, and are relatively independent. As the content of quartz, feldspar, and other brittle minerals in sandstone increases, the porosity of the reservoir increases, particle size of the sandstone decreases, DB of the fracture network increases, and average Δα decreases. In the absence of confining pressure, the complexity of the sample fracture network is mainly controlled by the microscopic fabric characteristics, and the complexity increases with increase of axial pressure. When present confining pressure plays a leading role; the higher it is, the lower the DB value, and the higher the mean Δα value. Clay minerals are unconducive to complex fractures formation. The mean values of DB and Δα of small-scale samples are greater than those of large-scale samples. The elastic modulus and compressive strength of sandstone are positively correlated with DB and mean Δα.

The multi-stage tectonism of compression and extension occurred in the southern part of the Lower Yangtze region in the Mesozoic, which is one of the important factors restricting the breakthrough of oil and gas exploration in this area. This paper aims to reveal the influence of Mesozoic tectonisim on oil and gas preservation in the Lower Yangtze area. Based on the seismic profile interpretation data, field outcrop survey, regional tectonic evolution history analysis and the drilling core data and oil-gas display of the Well Wanjingdi-1, we comprehensively discussed the favorable structural preservation conditions in the southern part of the Lower Yangtze region. The results of seismic interpretation profile and surface survey show that the southern part of the lower Yangtze River has experienced two important tectonic processes since the Late Triassic. The first stage is fold deformation, thrust fault and uplift erosion caused by Indosinian compression, and the second stage is extension since the Late Cretaceous, resulting in the formation of fault basin and normal fault activity. Shale gas display was obtained from the Permian shale in the Well Wanjingdi-1, and light oil was found in the drilling of the Lower Triassic Yinkeng Formation, indicating that the southern Lower Yangtze region has good enrichment conditions and resource potential, which points out a new direction for oil and gas exploration in the region. The analysis of structural preservation conditions shows that the Well Wanjingdi-1 is located in the syncline of the fold-depression belt. The amount of uplift and denudation was small in the Indosinian period. Since the late Cretaceous, the depression has a small amplitude of extension and has good sealing and reservoir forming conditions. It is a favorable structural position for oil and gas preservation in this region. Based on the comprehensive analysis of regional structure and sedimentary basin evolution, it is considered that in the southern Lower Yangtze region, the syncline structural belt in the southern margin of the basin with small erosion amount of Triassic strata or the central zone of fault basin overlying thick Cretaceous-Cenozoic strata should be taken as the key target to search for favorable oil and gas zones.