Search

We investigate the prospects for discovering the Flavour Changing Neutral Current (FCNC) $tqZ$ couplings via two production processes yielding trilepton signals: top quark pair production $pp\to t\bar{t}$ with one top decaying to the $Z$ boson and one light jet and the anomalous single top plus $Z$ boson production process $pp\to tZ$. We study these channels at various successors of the Large Hadron Collider~(LHC), i.e., the approved High-Luminosity LHC (HL-LHC) as well as the proposed High-Energy LHC~(HE-LHC) and Future Circular Collider in hadron-hadron mode (FCC-hh). We perform a full simulation for the signals and the relevant Standard Model (SM) backgrounds and obtain limits on the Branching Ratios (BRs) of $t\to qZ~(q=u,c)$, eventually yielding a trilepton final state through the decay modes $t\to b W^{+}\to b\ell^{+}\nu_{\ell}$ and $Z\to \ell^{+}\ell^{-}$. The upper limits on these FCNC BRs at 95\% Confidence Level (CL) are obtained at the HL-LHC with $\sqrt s=14$ TeV and 3 ab$^{-1}$, at the HE-LHC with $\sqrt s=27$ TeV and 15 ab$^{-1}$ as well as at the FCC-hh with $\sqrt s=100$ TeV and 30 ab$^{-1}$., Comment: 21 pages, 6 figures, 8 tables, to appear in Chinese Physics C

Future accelerators like the Future Circular Collider (FCC) under study at CERN, will be considerably larger than the Large Hadron Collider (LHC) presently in operation, with consequent increasing demands for cryogenically efficient cryostat solutions. MLI insulating systems remain the technology of choice for large accelerators due to the compromise they offer between thermal performance and cost-effectiveness. Thermal design solutions for cryostats can employ different combinations of thermal shields operating at intermediate temperatures, with optimally chosen MLI solutions. Data in literature is scarce for MLI performance at 4.2 K when operating with a thermal shield at a temperature between 60 K and 20 K. Therefore, a dedicated test program for the qualification of MLI samples is underway at CERN, exploring different MLI configurations, shielding radiative heat from 20-60 K to 4.2 K and with residual gas pressures between 1×10−6 and 1×10−4 mbar. This paper presents results from the test campaign.

In the framework of a world-wide international collaboration, the FCC-hh, a 100 TeV hadron collider in a 100-km long tunnel, is proposed as a future circular collider beyond LHC at CERN offering the broadest discovery potential at the energy frontier. For such high performance hadron collider, the cryogenic system has to distribute very large cooling capacities all along the 100-km tunnel for the superconducting magnets continuously cooled at 1.9 K and for the beam screens operated between 40 and 60 K. The required total cooling power will be produced in 10 refrigeration plants with a unit equivalent capacity of 100 kW at 4.5 K, up to 4 times larger than the present state-of-the-art. Half of the entropic refrigeration load is due to the synchrotron radiation produced by the high-energy proton beams and deposited on beam screens actively cooled around 50 K. This non-conventional thermal load distribution is an additional challenge for the FCC-hh cryogenic system. Furthermore, the cryogenic system has to cool down the cold mass of the FCC-hh machine in less than 20 days with controlled thermal gradients in the cryo-magnets and beam screens. Based on preliminary design works from research institutes, an engineering study was performed with world-leader industries to assess a preliminary conceptual design for the FCC-hh cryogenic plants with industrial solutions and innovative technologies. The present paper recalls the FCC-hh cryogenic requirements and presents the main results of Air Liquide study confirming the novel precooling refrigeration option down to 40 K.

We highlight the importance of the Future Circular Collider (FCC) in the search for possible Dark Matter (DM) signatures. The focus will be on well motivated Beyond the Standard Model (BSM) extensions. We consider a class of radiative neutrino mass models which extend the SM by adding heavy right handed neutrinos (RHNs), where the neutrino masses are generated at loop level. Within this class of models, the lightest RHN is considered to be stable and serves as DM candidate. We perform preliminary studies of final states which involve missing energy contributions from DM candidates to learn about the feasibility of observing these final states at the expected FCC-hh, FCC-eh and FCC-ee beam colliders. Some of our results are discussed where the topology of the the final states are analysed depending on the obtained sensitivity of the signal. The study also yields the most common promising discovery channels in exploring potential indirect DM signatures at future lepton and hadron colliders.

The Future Circular Collider (FCC) study aims at designing different options of a post-LHC collider. The high luminosity electron-positron collider FCC-ee based on the crab waist concept is considered as an intermediate step on the way towards FCC-hh, a 100 TeV hadron collider using the same tunnel of about 100 km. Due to a high intensity of circulating beams the impact of collective effects on FCC-ee performance has to be carefully analyzed. In this paper we evaluate beam coupling impedance of the FCC-ee vacuum chamber, estimate thresholds and rise times of eventual single- and multibunch beam instabilities and discuss possible measures to mitigate them., Talk at the LaPlas-2018 Conference, NRNU MEPhI, 30 January-01 February 2018, Moscow, Russia. 6 pages, 3 figures, 2 tables

A 2T, 6m long, 4m free bore superconducting solenoid is being designed for the so- called IDEA detector for probing electron-positron collisions at the proposed Future Circular Collider at CERN. In order to drive the cost of the magnet down, the solenoid is positioned around the inner tracking detector for which presence of the magnetic field is mandatory. This approach reduces the dimensions of the magnet roughly to half bore size, and therefore significantly the cost. However, the new position adds a new and demanding requirement solenoid and cryostat designs as they need to be as thin and radiation transparent as possible. A full mechanical analysis of the cryostat including all the mechanical loads is performed to the minimum effective wall thicknesses while respecting structural design norms. We present a novel design of a cryostat using alternative approaches such as corrugated walls honeycomb-like structures and compare to a classical solution of using solid uniform plate.

In the proposed Future Circular Collider (FCC-hh) pumping holes and interconnects between sections of the beamscreen can be sources of unwanted broadband impedance, potentially leading to the transverse mode coupling instability (TMCI). The pumping holes pose a greater challenge to the impedance calculation due to their small contribution per hole. Unlike for the Large Hadron Collider (LHC), analytical methods cannot be applied due to the complex beamscreen geometry and the greater size of the holes. Instead, two computational methods are used and compared to each other. For the interconnects, the impedance due to a sophisticated system of tapers is also estimated using computational methods., Proceedings of the 9th Int. Particle Accelerator Conf., IPAC2018, Vancouver, BC, Canada

The Future Circular Collider (FCC) under study at CERN will produce 50-TeV high-energy proton beams. The high-energy particle beams are bent by 16-T superconducting dipole magnets operating at 1.9 K and distributed over a circumference of 80 km. The circulating beams induce 5 MW of dynamic heat loads by several processes such as synchrotron radiation, resistive dissipation of beam image currents and electron clouds. These beam-induced heat loads will be intercepted by beam screens operating between 40 and 60 K and induce transients during beam injection. Energy ramp-up and beam dumping on the distributed beam-screen cooling loops, the sector cryogenic plants and the dedicated circulators. Based on the current baseline parameters, numerical simulations of the fluid flow in the cryogenic distribution system during a beam operation cycle were performed. The effects of the thermal inertia of the headers on the helium flow temperature at the cryogenic plant inlet as well as the temperature gradient experienced by the beam screen has been assessed. Additionally, this work enabled a thorough exergetic analysis of different cryogenic plant configurations and laid the building-block for establishing design specification of cold and warm circulators.

Software for the next generation of experiments at the Future Circular Collider (FCC), should by design efficiently exploit the available computing resources and therefore support of parallel execution is a particular requirement. The simulation package of the FCC Common Software Framework (FCCSW) makes use of the Gaudi parallel data processing framework and external packages commonly used in HEP simulation, including the Geant4 simulation toolkit and the DD4HEP geometry toolkit. Using Geant4 for full simulation implies taking into account all physics processes for transporting the particles through detector material and this is highly CPU-intensive. At the early stage of detector design and for some physics studies such accuracy is not needed, making a fast parametrised simulation better suited. Geant4 provides the tools to define a parametrisation, where the overall response of the detector is simulated in a parametric way. Many experiments create their own frameworks for these fast simulation studies. The implementation for the FCC allows an interplay between the two types of simulation within Geant4. Based on the type of the particle or a region within the detector, either full or fast simulation may be performed, running the time-consuming detailed simulation only for the regions and particles of interest.

Responding to the European Strategy for Particle Physics update 2013, the Future Circular Collider study explores scenarios of circular frontier colliders for the post-LHC era. One branch of the study assesses industrial approaches to model and simulate the reliability and availability of the entire particle collider complex based on the continuous monitoring of CERN's accelerator complex operation. The modelling is based on an in-depth study of the CERN injector chain and LHC, and is carried out as a cooperative effort with the HL-LHC project. The work so far has revealed that a major challenge is obtaining accelerator monitoring and operational data with sufficient quality, to automate the data quality annotation and calculation of reliability distribution functions for systems, subsystems and components where needed. A flexible data management and analytics environment that permits integrating the heterogeneous data sources, the domain-specific data quality management algorithms and the reliability modelling and simulation suite is a key enabler to complete this accelerator operation study. This paper describes the Big Data infrastructure and analytics ecosystem that has been put in operation at CERN, serving as the foundation on which reliability and availability analysis and simulations can be built. This contribution focuses on data infrastructure and data management aspects and presents case studies chosen for its validation. publishedVersion

This paper describes simulations of detector response to multi-TeV physics at the Future Circular Collider (FCC-hh) or Super proton-proton Collider (SppC) which aim to collide proton beams with a centre-of-mass energy of 100 TeV. The unprecedented energy regime of these future experiments imposes new requirements on detector technologies which can be studied using the detailed GEANT4 simulations presented in this paper. The initial performance of a detector designed for physics studies at the FCC-hh or SppC experiments is described with an emphasis on measurements of single particles up to 33 TeV in transverse momentum. The reconstruction of hadronic jets has also been studied in the transverse momentum range from 50 GeV to 26 TeV. The granularity requirements for calorimetry are investigated using the two-particle spatial resolution achieved for hadron showers., 26 pages, 18 figures

The international study at CERN of a possible future circular collider (FCC) considers an option for a very high energy hadron-hadron collider located in a quasi-circular underground tunnel of about 100 km of length. The technical segmentation of the collider foresees continuously cooled sections of up to 10.4 km; throughout the entire section length, more than 600 kW of heat mainly generated by the beam synchrotron radiation must be removed from the beam screen circuits at a mean temperature of 50 K. The cryogenic system has to be designed to extract the heat load dependably with a high-efficiency refrigeration process. Reliable and efficient cooling of the FCC beam screen in all possible operational modes requires a solid basic design as well as well-matched components in the final arrangement. After illustrating the decision making process leading to the selection of an elementary hydraulic scheme, this paper presents preliminary conceptual designs of the FCC beam screen cooling system and compares the different schemes regarding the technical advantages and disadvantages with respect to the exergetic efficiency.

In the course of the studies for the next generation particle accelerators, in this case the Future Circular Collider for hadron-hadron interaction (FCC-hh), different aspects are being investigated. One of these is the heat load on the beam screen, which results mainly from the synchrotron radiation. In case of the FCC-hh, a heat load of 6 MW is expected. The heat has to be absorbed at 40 to 60 K due to vacuum restrictions. In this range, refrigeration is possible with both helium and neon. Our investigations are focused on a mixed refrigerant of these two components, which combines the advantages of both. Especially promising is the possible substitution of the oil flooded screw compressors by more efficient turbo compressors. This paper investigates different flow schemes and mixture compositions with respect to complexity and efficiency. Furthermore, thermodynamic aspects, e.g. whether to use cold or warm secondary cycle compressors are discussed. Additionally, parameters of the main compressor are established.

Following recommendations of the recent update of the European strategy in particle physics, CERN has undertaken an international study of possible future circular colliders beyond the LHC. This study considers an option for a very high energy (100 TeV) hadron-hadron collider located in a quasi-circular underground tunnel having a circumference of 80 to 100 km. The synchrotron radiation emitted by the high-energy hadron beam increases by more than two orders of magnitude compared to the LHC. To reduce the entropic load on the superconducting magnets' refrigeration system, beam screens are indispensable to extract the heat load at a higher temperature level. After illustrating the decisive constraints of the beam screen's refrigeration design, this paper presents a preliminary design of the length of a continuous cooling loop comparing helium and neon, for different cooling channel geometries with emphasis on the cooling length limitations and the exergetic efficiency.