Search

High-quality protons have many potential applications in tumor therapy, proton radiography, fast ignition and nuclear physics. Over recent decades, significant progress has been made in generating such proton beams with lasers. However, it is still challenging to achieve a compact proton beam with an energy of hundreds of MeV under the laser intensities currently available. Here, we propose a novel scheme to produce above-100 MeV protons in nonuniform near-critical-density (NCD) plasmas driven by a Laguerre–Gaussian (LG) laser pulse. When a linearly-polarized LG laser pulse with the intensity of ∼1020 W cm−2 enters the NCD plasmas with a trapezoidal density profile, a donut-like double-channel structure with an electron column on the axis is produced behind the laser pulse, together with a unique, strong magnetic field. At the end of the density plateau, the magnetic field begins to expand in both longitudinal and transverse directions. The magnetic pressure force displaces the electrons with regard to the protons, resulting in a quasi-static electric field E x S . This electrostatic field can remain robust and be sustaintained for a long time since the magnetic field decreases very slowly, i.e. E x S ∝ ▽ B z 2 . Thus, the protons can be accelerated by the longitudinal electrostatic field and confined by the generated transverse focusing field. Three dimensional particle-in-cell simulations confirmed that a well-defined above-100 MeV proton beam with a cut-off energy at least 3.5 times larger than that of the normal Gaussian laser could be obtained, making the proton beams a potential source for tumor therapy in the future.

Space radiation with inherently broadband spectral flux poses a huge danger to astronauts and electronics on aircraft, but it is hard to simulate such feature with conventional radiation sources. Using a tabletop laser-plasma accelerator, we can reproduce exponential energy particle beams as similar as possible to these in space radiation. We used such an electron beam to study the electron radiation effects on the surface structure and performance of two-dimensional material (FePS3). Energetic electron beam led to bulk sample cleavage and damage between areas of uneven thickness. For the FePS3 sheet sample, electron radiation transformed it from crystalline state to amorphous state, causing the sample surface to rough. The full widths at the half maximum of characteristic Raman peaks became larger, and the intensities of characteristic Raman peaks became weak or even disappeared dramatically under electron radiation. This trend became more obvious for thinner samples, and this phenomenon was attributed to the cleavage of P–P and P–S bonds, destabilizing the bipyramid structure of [P2S6]4– unit. The results are of great significance for testing the maximum allowable radiation dose for the two-dimensional material, implying that FePS3 cannot withstand such energetic electron radiation without an essential shield.

High-gain magnetized liner inertial fusion (MagLIF) is a possible way to realize fusion. To investigate electrothermal effects on the transport of magnetic flux and thermal flux in MagLIF, this study has developed a resistive magnetohydrodynamics (MHD) module including an axial magnetic field using the code MULTI-IFE. MagLIF driven by a peak current of 60 MA releases 1080 MJ of fusion energy for a 1-cm-long liner, corresponding to an energy gain of approximately 180. The magnetic field is decompressed by electrothermal effects owing to the great temperature gradient in the fuel. This papers shows that a Nernst flux limiter of between 0.1 and 0.3 prevents the Nernst velocity from significantly decompressing the axial magnetic field and achieving a relative high yield. Compared with that of a simple gas target, the magnetic flux loss in the high-gain MagLIF target can be reduced from 70% to 30% owing to the magnetic insulation in the cryogenic deuterium-tritium. Most of the cryogenic DT layer in a high-gain MagLIF target is burned, resulting in a significant increase in the fusion yield.

A new scheme is proposed to improve the electron beam quality of ionization-induced injection by tailoring gas profile in laser wakefield acceleration. Two-dimensional particle-in-cell simulations show that the ionization-induced injection mainly occurs in high-density stage and automatically truncates in low-density stage due to the decrease of wakefield potential difference. The beam loading can be compensated by the elongated beam resulting from the density transition stage. The beam quality can be improved by shorter injection distance and beam loading effect. A quasi-monoenergetic electron beam with a central energy of 258 MeV and an energy spread of 5.1% is obtained under certain laser-plasma conditions.

Collision of intermediate-energy heavy ions is an important way to investigate the state of high-density nuclear matter and formation of quark gluon plasmas. In this paper, we demonstrate from two-dimensional particle-in-cell simulations that hundreds-GeV Au79+ ions can be generated by ultrashort ∼1022–24 W cm−2 lasers interacting with high-Z grain doped gas. Under extremely intense laser field, strong γ-ray radiation has resulted in massive laser energy loss, and the invoked radiation reaction trapping of electrons weakens the heavy ion acceleration. However, due to hole-boring acceleration and multi-body expansion acceleration of high-Z grains, the energy conversion efficiency from laser to heavy ions is still up to 32%. Our results might provide an effective routine to carry out the experimental explorations of heavy-ion collisions by using hundreds-petawatt laser facilities.

Electron-positron plasma has attracted much attention recently due to their unique properties. In this paper, we study the acceleration of electron-positron plasma in a cone by using PIC method. The electrons and positrons will be scattered by transverse ponderomotive force during the interaction between laser and electron-positron plasma. A new scheme is proposed to obtain high-energy dense collimated electron-positron plasma by a hollow gold cone. Transverse scattered electrons and positrons are pinched in the gold cone. Both electrons and positrons can be accelerated by ponderomotive force continuously and a dense collimated electron-positron plasma is produced. The energy of electrons and positrons obtained in the cone is much higher than the upper limit of electron energy obtained by ponderomotive force acceleration. The high quality electron and positron beam has great potential value in further research.

Multiple lasers interacting with a deuterated (D) pitcher-catcher target and neutron generation are investigated using two-dimensional hybrid particle-in-cell and Monte Carlo simulations. It is found that when multiple laser pulses are focused on the front surface of the pitcher layer, D+ ion acceleration by target normal sheath acceleration (TNSA) is enhanced by the interfering overlapped light fields and the resulting periodic target-surface structure. With three laser pulses each of 4.5×1019 W/cm2 intensity, 33 fs duration and ~160 mJ energy, focusing at suitable angles on the pitcher layer, one can obtain 15 MeV D+ ions and ~25% laser-to-D+ ions energy conversion efficiency. As the resulting high-energy-density D+ ions bombard the catcher layer, D-D fusion reactions are triggered. About 3.6×107 neutrons can be produced, with the maximum neutron production rate as high as 3.1×1036 m-3s-1, almost an order of magnitude higher than that from a single laser of the same total energy.

Ionization-induced electron injection in a chirped laser pulse driven wakefield acceleration is investigated through particle-in-cell simulations. We find that negative (positive) chirp can longitudinally stretch (compress) laser pulse, and the wakefield amplitude can be enhanced regardless of the chirp sign. On the other hand, the rapid compression of a positively chirped pulse leads to the decrease of the wakefield potential difference, which breaks the ionization injection condition and consequent injection truncation occurs. The effective injection only lasts for a few hundred micrometers and the detailed injection length is determined by the chirp parameter. As a result, a highly tunable quasi-monoenergetic electron beam with narrow energy spread, hundreds of MeV central energy and tens of pC charge can be stably produced by this scheme.

We propose a compact scheme for high-density and high-energy positron generation. In the scheme, the generation, compression and acceleration of positrons are encompassed in a plasma channel irradiated by an ultra intense laser. In about 20 μm, positrons are accelerated with their energy beyond 20 GeV, and are compressed with a maximal density of 4.1n c . The obtained positron beam with a wave-like density profile is accelerated via the direct laser acceleration.

By using a two-dimensional particle-in-cell simulation, we demonstrate a scheme for high-energy-density electron beam generation by irradiating an ultra intense laser pulse onto an aluminum (Al) target. With the laser having a peak intensity of 4 × 1023 W cm−2, a high quality electron beam with a maximum density of 117nc and a kinetic energy density up to 8.79 × 1018 J m−3 is generated. The temperature of the electron beam can be 416 MeV, and the beam divergence is only 7.25°. As the laser peak intensity increases (e.g., 1024 W cm−2), both the beam energy density (3.56 × 1019 J m−3) and the temperature (545 MeV) are increased, and the beam collimation is well controlled. The maximum density of the electron beam can even reach 180nc. Such beams should have potential applications in the areas of antiparticle generation, laboratory astrophysics, etc.

High-energy-density electron–positron pairs play an increasingly important role in many potential applications. Here, we propose a scheme for enhanced positron production by an ultra intense laser irradiating a gas-Al compound target via the multi-photon Breit–Wheeler (BW) process. The laser pulse first ionizes the gas and interacts with a near-critical-density plasma, forming an electron bubble behind the laser pulse. A great deal of electrons are trapped and accelerated in the bubble, while the laser front hole-bores the Al target and deforms its front surface. A part of the laser wave is thus reflected by the inner curved target surface and collides with the accelerated electron bunch. Finally, a large number of γ photons are emitted in the forward direction via the Compton back-scattering process and the BW process is initiated. Dense electron–positron pairs are produced with a maximum density of m−3. Simulation results show that the positron generation is greatly enhanced in the compound target, where the positron yield is two orders of magnitude greater than that in only the solid slab case. The influences of the laser intensity, gas density and length on the positron beam quality are also discussed, which demonstrates the feasibility of the scheme in practice.

We study a laser wakefield acceleration driven by mid-infrared (mid-IR) laser pulses through two-dimensional particle-in-cell simulations. Since a mid-IR laser pulse can deliver a larger ponderomotive force as compared with the usual 0.8 μm wavelength laser pulse, it is found that electron self-injection into the wake wave occurs at an earlier time, the plasma density threshold for injection becomes lower, and the electron beam charge is substantially enhanced. Meanwhile, our study also shows that quasimonoenergetic electron beams with a narrow energy-spread can be generated by using mid-IR laser pulses. Such a mid-IR laser pulse can provide a feasible method for obtaining a high quality and high charge electron beam. Therefore, the current efforts on constructing mid-IR terawatt laser systems can greatly benefit the laser wakefield acceleration research.