Search

We have demonstrated a digital receiver performing direct digitization of radio-frequency signals over a wide frequency range from kilohertz to gigahertz. The complete system, consisting of a cryopackaged superconductor all-digital receiver (ADR) chip followed by room-temperature interface electronics and a field programmable gate array (FPGA) based post-processing module, has been developed. The ADR chip comprises a low-pass analog-to-digital converter (ADC) delta modulator with phase modulation–demodulation architecture together with digital in-phase and quadrature mixer and a pair of digital decimation filters. The chip is fabricated using a 4. 5k A cm −2 process and is cryopackaged using a commercial-off-the-shelf cryocooler. Experimental results in HF, VHF, UHF and L bands and their analysis, proving consistent operation of the cryopackaged ADR chip up to 24.32 GHz clock frequency, are presented and discussed.

We have designed, fabricated and tested the second-generation (2G) design of a high-resolution, dynamically programmable analog-to-digital converter (ADC) for radar and communications applications. The ADC chip uses the phase modulation–demodulation architecture and on-chip digital filtering. The 2G ADC design has been substantially enhanced. Both ADC front-end modulator and demodulator, as well as decimation digital filter, have been redesigned for operation at 20 GHz. Test results of this 6000 Josephson junction 2G ADC chip at clock frequencies up to 19.6 GHz are described. These test results were compared to the results of ADC functional simulation using MATLAB.

We designed and tested new energy-efficient single flux quantum (eSFQ) circuits. The eSFQ design approach is based on biasing logic gates via decision-making pairs (DMPs) which connect clock lines to synchronous gates. The eSFQ design of asynchronous gates is more challenging, since these gates are not clocked. We demonstrate eSFQ designs of asynchronous circuits and implemented two versions of eSFQ toggle flip-flops (eTFF) cells embedded in a synchronous shift register environment. The first design is based on the bias-free version of a TFF operating in the ballistic mode. In the second design, the TFFs dc bias is applied symmetrically, while the necessary half-quantum phase skew is achieved by magnetic flux bias, which can also be done with a pi-junction phase shifter. Surrounding shift registers are the eSFQ versions of the RSFQ shift register with two junctions per bit. In this work, we report the functional operation of these eSFQ circuits and their energy consumption.