Search

In this manuscript, we demonstrate the potential of replacing the standard bottom anti-reflective coating (BARC) with a polymethylglutarimide (PMGI) layer for wafer-scale nanofabrication by means of deep-UV displacement talbot lithography (DTL). PMGI is functioning as a developable non-UV sensitive bottom anti-reflective coating (DBARC). After introducing the fabrication process using a standard BARC-based coating and the novel PMGI-based one, the DTL nanopatterning capabilities for both coatings are compared by means of the fabrication of etched nanoholes in a dielectric layer and metal nanodots made by lift-off. Improvement of DTL capabilities are attributed to a reduction of process complexity by avoiding the use of O2 plasma etching of the BARC layer. We show the capacity of this approach to produce nanoholes or nanodots with diameters ranging from 95 to 200 nm at a wafer-scale using only one mask and a proper exposing dose. The minimum diameter of the nanoholes is reduced from 118 to 95 nm when using the PMGI-based coating instead of the BARC-based one. The possibilities opened by the PMGI-based coating are illustrated by the successful fabrication of an array of nanoholes with sub-100 nm diameter for GaAs nanowire growth on a 2″ GaAs wafer, a 2″ nanoimprint lithography (NIL) master stamp, and an array of Au nanodots made by lift-off on a 4″ silica wafer. Therefore, DTL possess the potential for wafer-scale manufacturing of nano-engineered materials.

Devices based on molecular motor-driven cytoskeletal filaments, e.g., actin filaments, have been developed both for biosensing and biocomputational applications. Commonly, these devices require nanoscaled tracks for guidance of the actin filaments which has limited the patterning technique to electron beam lithography. Thus, large scale systems become intractable to fabricate at a high throughput within a reasonable time-frame. We have studied the possibility to fabricate molecular motor-based devices using the high throughput, high resolution technique of nanoimprint lithography. Molecular motor-based devices require wide open regions (loading zones) to allow filaments to land for later propulsion into the nanoscale tracks. Such open zones are challenging to fabricate using nanoimprint lithography due to the large amount of material displaced in the process. We found that this challenge can be overcome by introducing nanoscaled pillars inside the loading zones, into which material can be displaced during imprint. By optimising the resist thickness, we were able to decrease the amount of material displaced without suffering from insufficient filling of the stamp. Furthermore, simulations suggest that the shape and positioning of the pillars can be used to tailor the overall cytoskeletal filament transportation direction and behaviour. This is a potentially promising design feature for future applications that however, requires further optimisations before experimental realisation.

We report on the realization of a novel interdigitated cantilever array with electrostatic control of the shape of the interdigitated array. It consists of an array of SiO2/metal double-finger cantilevers in a grating configuration together with an electrical connection part. The complete grating structure is fabricated with nanoimprint lithography, UV lithography and reactive ion etching. The patterns of the cantilever arrays are defined by nanoimprint lithography. The electrical contact pads are defined and aligned with the imprinted grating pattern by UV lithography. The two steps of reactive ion etching are optimized to get vertical sidewalls of the SiO2 cantilevers and finally to release them from the Si substrate. By applying a bias, the shape of the cantilever array can be altered due to the electrostatic force. The dimensions of the cantilevers and the spacing between them are optimized to achieve the desired functional operating characteristics of the structures. Since the fabrication scheme is based on nanoimprint lithography, such electrostatically controlled periodic structures may be relatively easily and non-expensively realized in various configurations, allowing them to function as optical switching elements, electrical filters, mass sensors, etc.

This paper describes the fabrication of efficient ultra-thin silicon transmission detectors for use as pre-cell detectors in single-ion experiments on living cells at the Lund Ion Beam Analysis Facility. More than 40 detectors of different thicknesses down to 5 μm have been fabricated and packaged. The main design considerations were very low leakage current (below 9 nA) and low full depletion voltage at biases less than 0.5 V at room temperature. In addition, we have shown that cooling the device can reduce the leakage current to 3 nA. The experimental testing of the pre-cell detection system is based on counting the passage of ions through the transmission (ΔE) detector before hitting the stopping (E) detector placed behind it, to ensure the accurate delivery of specific doses of radiation to the sample. Optimal detection of the fabricated detectors for the passage of an external beam of 2.2 MeV protons was obtained by cooling the device to below 2°C. Cooling the ΔE detectors provides up to 20% better energy resolution and up to 98% detection efficiency for 2.2 MeV protons. The development of this kind of efficient pre-cell detector enables a range of new experiments to be conducted on thick biological samples.