Search

Semiconducting piezoelectric materials have attracted considerable interest due to their central role in the emerging field of piezotronics, where the development of a piezo-potential in response to stress or strain can be used to tune the band structure of the semiconductor, and hence its electronic properties. This coupling between piezoelectricity and semiconducting properties can be readily exploited for force or pressure sensing using nanowires, where the geometry and unclamped nature of nanowires render them particularly sensitive to small forces. At the same time, piezoelectricity is known to manifest more strongly in nanowires of certain semiconductors. Here, we report the design and fabrication of highly sensitive piezotronic pressure sensors based on GaAs nanowire ensemble sandwiched between two electrodes in a back-to-back diode configuration. We analyse the current–voltage characteristics of these nanowire-based devices in response to mechanical loading in light of the corresponding changes to the device band structure. We observe a high piezotronic sensitivity to pressure, of ~7800 meV MPa−1. We attribute this high sensitivity to the nanowires being fully depleted due to the lack of doping, as well as due to geometrical pressure focusing and current funnelling through polar interfaces.

Harvesting energy from ambient mechanical sources in our environment has attracted considerable interest due to its potential to power applications such as ubiquitous wireless sensors and Internet of Things devices. In this context, piezoelectric and/or triboelectric materials offer a relatively simple means of directly converting mechanical energy from ubiquitous ambient vibrating sources into electrical power for microscale/nanoscale device applications. In particular, nanoscale energy harvesters, or nanogenerators, are capable of converting low-level ambient vibrations into electrical energy, thus are vital to the realization of the next generation of self-powered devices. Polymer-based nanogenerators are attractive as they are inherently flexible and robust, making them less prone to mechanical failure which is a key requirement for vibrational energy harvesters. They are also lightweight, easy and cheap to fabricate, lead-free and biocompatible, but in many cases their energy harvesting performance is found lacking in comparison to more commonly studied inorganic materials. Recent advances have been made in developing scalable nanofabrication techniques for flexible and low-cost polymer-based nanogenerators with improved energy conversion efficiency, including the incorporation of high-quality polymer nanowires with enhanced crystallinity, piezoelectric and/or surface charge properties. In this review, we discuss aspects of nanomaterials growth and energy harvester device design, including those involving nanowires of polymers of polyvinylidene fluoride and its co-polymers, Nylon-11, and poly-lactic acid for scalable piezoelectric and triboelectric nanogenerator applications, as well as the design and performance of polymer-ceramic nanocomposite nanogenerators. In particular, we highlight the effects of growth parameters, nanoconfinement, self-poling, surface polarization, crystalline phases, and device assembly on the energy harvesting performance of a range of recently reported nanostructured polymer-based materials and devices.

We have developed a free-standing-mode based triboelectric nanogenerator (F-TENG) that consists of indium tin oxide (ITO) foils and a polytetrafluoroethylene (PTFE) thin film. By utilizing the wind-induced resonance vibration of a PTFE film between two ITO electrodes, the F-TENG delivers an open-circuit voltage up to 37 V and a short-circuit current of 6.2 μA, which can be used as a sustainable power source to simultaneously and continuously light up tens of light emitting diodes (LEDs) and charge capacitors. Moreover, uniform division of the electrode into several parallel units efficiently suppresses the inner counteracting effect of undulating film and leads to an enhancement of output current by 95%. The F-TENG holds prominent durability and an excellent linear relationship between output current and flow rate, revealing its feasibility as a self-powered sensor for detecting wind speed. This work demonstrates potential applications of the triboelectric generator in gas flow harvesters, self-powered air navigation, self-powered gas sensors and wind vector sensors.