Search

Screen-printed graphene is integrated with multiple-input multiple-output (MIMO) technology to conquer the most concerned surge in electronic waste caused by the mass deployment of Internet of things (IoT) applications. A flexible MIMO antenna is implemented with simple fabrication process suitable for large-scale production by screen printing graphene highly conductive ink on paper substrate, ensuring high-speed 5G mass data wireless transmission without damaging the ecological environment. This environmental-friendly, low-cost, flexible and conformal MIMO antenna with orthogonal polarization diversity employs co-planar waveguide feed and planar pattern for achieving high space utilization and better integration in most scenarios, for instance, body centric networks and monitoring systems. Excellent performance has been achieved due to the high conductivity of the graphene: the fabricated antenna exhibits an average sheet resistance of 1.9 Ω s q − 1 . The bandwidth of the antenna ranges from 2.22 GHz to 3.85 GHz (53.71% fractional bandwidth), covering 4 G long term evolution, sub-6 GHz 5 G mobile communication networks, 2.5 and 3.5 GHz WiMAX, and 2.4 and 3.6 GHz WLAN. Within this range, the antenna exhibits effective radiation, also its envelope correlation coefficient remains below 0.2 × 10 − 6 , manifesting outstanding signal transmission quality in a variety of wireless networks. This work illustrates a novel aggregation of MIMO technology and graphene printing electronics, enabling cheap accessible and green MIMO antennas to be massively integrated in IoT applications.

Due to the ability to tightly confine electromagnetic energy, plasmonic nanoantennas have been widely studied for surface-enhanced infrared absorption (SEIRA) spectroscopy, surface-enhanced Raman spectroscopy as well as refractive index sensing. However, most of the nanoantennas are limited by narrow resonant band and it is rather challenging to detect multiple molecular fingerprints. In this work, we report dual and triple- resonant pad-rod plasmonic nanoantennas which are nanorods with large pads at their ends placed above gold (Au) mirror separated by a spacer layer. By adjusting the geometries, the nanoantennas have demonstrated dual and triple resonant bands enabling detection of molecular fingerprints at different wavelength. The calculated maximum SEIRA enhancement factor is around 1.8 × 106, which is among the highest reported so far. The pad-rod plasmonic nanoantennas have been used for the detection of molecules of polymethyl methacrylate (PMMA) by SEIRA and fingerprints of C=O and C–H bands are clearly identified. This work has shown that the multiple-resonant pad-rod plasmonic nanoantennas are promising for chemical and biomolecular sensing by the detection of vibrational fingerprints with SEIRA.

This paper presents the design, modeling and experimental verification of a novel reconfigurable/tunable dual band/dual mode ferrite composite right/left handed CPW coupled-line coupler. The composite right/left handed configuration has been realized by loading coupled CPW transmission lines with series inter-digital capacitors and shunt segment inductors. The coupler performance has been verified using the equivalent circuit model, electromagnetic full wave simulations and experimental measurements. The coupler operates on dual mode in that it has dual bands of operation with two different propagation mechanisms. The first band has only a reciprocal backward coupling whereas the second band has only nonreciprocal through propagation. The non-reciprocity isolation in the second band is better than average of 15 dB. Compared to conventional single band single mode coupled line coupler of length = 0.25 g, the proposed novel dual band dual mode coupler length is almost the same (0.265 g) at 4.5 GHz. Furthermore, the dual mode/dual band coupler can have tunable functionality.

Graphene RF and microwave passive components such as coplanar waveguide transmission lines, open/short-circuited resonators and wideband antenna on paper substrate were designed, screen printed and characterized in this work. The experimental results demonstrate that the screen printed graphene passive components can be used for RF signal transmitting, processing and radiating/receiving; revealing that graphene ink can be a low cost alternative to much more expensive metal nanoparticle inks, such as silver nanoparticle ink. The screen printed graphene is processed at low temperature so that it is compatible with heat-sensitive flexible materials like papers, PTFE (Polytetrafluoroethylene) and textiles. The screen printed graphene passive components reported here are of high conductivity, high flexibility, light weight and low cost, making them ideal candidate for low cost wearable electronics. This work makes it prospective to manufacture RF and microwave passive components in mass production by screen printing in much lower cost to any other known techniques.