Search

In this study, a TE01 mode converter was developed to locate an axial crack on the inner surface of a metal pipe. Three-dimensional finite element simulation was conducted to evaluate the effect of inserted coaxial cables on the transmission characteristic of the mode converter. The result showed that the energy of TE mode microwaves leaned to transmit to one side when the cables penetrated with inclination. To demonstrate the effectiveness of the mode converter, experimental verification was conducted. The mode converter was fabricated based on the simulation result. Microwaves were emitted through the pipe wall of the converter to propagate on both sides ('right side' and 'left side') of a pipe with an artificial slit. Compared with the signals from each side, the reflection from the slit on the right side was more significant than that on the left side. This result is consistent with the numerical simulation result. [ABSTRACT FROM AUTHOR]

This study discusses the characteristics of a mode converter to generate microwaves in the TE01 mode for the long-range inspection of pipes. Numerical analysis was conducted to evaluate the effect of the pipe diameter and the number of coaxial cables inserted into the pipe on the efficiency of converting microwaves from the coaxial TEM mode to the circular TE01 mode. The results reveal that the most efficient frequency range for TE01 mode propagation strongly depends on the number of cables and pipe diameter. Subsequent experiments were performed using brass pipes with a length of 5 m and diameters of 39.0 and 74.0 mm. The results of these experiments are consistent with the results of the numerical analysis: the pipe with a diameter of 39.0 mm showed a clear signal from an axial slit 1.5 m away from the mode converter and the pipe with a diameter of 74.0 mm showed almost no difference between signals with or without the slit. [ABSTRACT FROM AUTHOR]