Search

Background: Advances in rapid-prototyping and 3D printing technologies have enhanced the possibilities in preparing designed architectures for tissue engineering applications. A major advantage in custom designing is the ability to create structures with desired mechanical properties. While the behaviour of a designed scaffold can be simulated using bulk material properties, it is important to verify the behaviour of a printed scaffold at the microstructure level., Objective: In this study we present an effective method in validating the mechanical behaviour of designed scaffolds using a μCT with an in-situ mechanical deformation device., Methods: The scaffolds were prepared from biodegradable poly(trimethylene carbonate) (PTMC) by stereolithography and images obtained using a high-resolution μCT with 12.25μm isometric voxels. The data was processed (filtering, segmentation) and analysed (surface generation, registration) to extract relevant deformation features., Results: The computed local deformation fields, calculated at sub-pore resolutions, displayed expected linear behaviour within the scaffold along the compressions axis. On planes perpendicular to this axis, the deformations varied by 150- 200μm., Conclusions: μCT based imaging with in-situ deformation provides a vital tool in validating the design parameters of printed scaffolds. Deformation fields obtained from micro-tomographic image volumes can serve to corroborate the simulated ideal design with the realized product.

Composite materials of photo-crosslinked poly(trimethylene carbonate) and nanoscale hydroxyapatite were prepared and their mechanical characteristics for application as orbital floor implants were assessed. The composites were prepared by solvent casting poly(trimethylene carbonate) macromers with varying amounts of nano-hydroxyapatite and subsequent photo-crosslinking. The incorporation of the nano-hydroxyapatite into the composites was examined by thermogravimetric analysis, scanning electron microscopy and gel content measurements. The mechanical properties were investigated by tensile testing and trouser tearing experiments. Our results show that nano-hydroxyapatite particles can readily be incorporated into photo-crosslinked poly(trimethylene carbonate) networks. Compared to the networks without nano-hydroxyapatite, incorporation of 36.3 wt.% of the apatite resulted in an increase of the E modulus, yield strength and tensile strength from 2.2 MPa to 51 MPa, 0.5 to 1.4 N/mm2 and from 1.3 to 3.9 N/mm2, respectively. We found that composites containing 12.4 wt.% nano-hydroxyapatite had the highest values of strain at break, toughness and average tear propagation strength (376% , 777 N/mm2 and 3.1 N/mm2, respectively).

Background: Infection is a common problem in trauma and orthopaedic surgery. Antibiotic-loaded biomaterials are used locally to clear infections as an adjunct to systemic antibiotics. Gentamicin-sulphate (GEN-SULPH) is commonly used in antibiotic-loaded biomaterials, although it displays high water solubility resulting in quick diffusion from the carrier., Objective: Preparation of a lipophilic derivative of gentamicin to reduce solubility and obtain a slower release. Subsequently, entrapment of this lipophilic gentamicin within poly(trimethylene carbonate) (PTMC) matrices., Methods: Hydrophobic ion-pairing was used to prepare lipophilic gentamicin (GEN-AOT). The susceptibility of Staphylococcus aureus NCTC 12973 and Staphylococcus epidermidis 103.1 for GEN-AOT was tested and the viability of fibroblasts upon exposure to GEN-AOT was assessed. GEN-AOT was then loaded into PTMC films., Results: GEN-AOT was successfully prepared as confirmed by FTIR-spectroscopy. GEN-AOT was bactericidal for S. epidermidis and S. aureus at 0.5 μM and 8.5 μM, respectively. At 1.1 μM GEN-AOT no reduction in fibroblast viability was observed. At 11 μM the reduction was ∼50% . PTMC discs loaded with GEN-AOT were prepared by compression molding., Conclusions: Lipophilic GEN-AOT was at least as potent as GEN-SULPH. For S. epidermidis it was even more potent than GEN-SULPH. More than 50% fibroblast cell viability was maintained at bactericidal concentration for both bacterial strains.

For the treatment of cardiovascular disease, functional arterial blood vessel prostheses with an inner diameter less than 6 mm are needed. This article gives an overview of the preparation of such vascular grafts by means of tissue engineering.