Search

This study aimed at evaluating the nitrous oxide (N2O) emissions from membrane bioreactors (MBRs) for wastewater treatment. The study investigated the N2O emissions considering multiple influential factors over a two-year period: (i) different MBR based process configurations; (ii) wastewater composition (municipal or industrial); (iii) operational conditions (i.e. sludge retention time, carbon-to-nitrogen ratio, C/N, hydraulic retention time); (iv) membrane modules. Among the overall analysed configurations, the highest N2O emission occurred from the aerated reactors. The treatment of industrial wastewater, contaminated with salt and hydrocarbons, provided the highest N2O emission factor (EF): 16% of the influent nitrogen for the denitrification/nitrification-MBR plant. The lowest N2O emission (EF = 0.5% of the influent nitrogen) was obtained in the biological phosphorus removal-moving bed-MBR plant likely due to an improvement in biological performances exerted by the co-presence of both suspended and attached biomass. The influent C/N ratio has been identified as a key factor affecting the N2O production. Indeed, a decrease of the C/N ratio (from 10 to 2) promoted the increase of N2O emissions in both gaseous and dissolved phases, mainly related to a decreased efficiency of the denitrification processes. [ABSTRACT FROM AUTHOR]

Over the last decade new technologies are emerging even more for wastewater treatment. Among the new technologies, a recent possible solution regards Moving Bed Biofilm Reactors (MBBRs) that represent an effective alternative to conventional processes. More specifically such systems consist in the introduction of plastic elements inside the aerobic reactor as carrier material for the growth of attached biomass. Recently, one of the mostly used alternatives is to couple the Moving Bed Biofilm Reactor (MBBR) process with the conventional activated sludge process, and the resulting process is usually called HMBBR (Hybrid MBBR). In the MBBR process the biofilm grows attached on small plastic elements that are kept in constant motion throughout the entire volume of the reactor. Indeed, in such a system, a competition between the two biomasses, suspended and attached, can arise for the availability of the substrates, leading, as a consequence, to a modification in the biokinetic parameters of the two biomasses, compared to that of a pure suspended or attached biomass process. This paper presents the first results of a study aimed at estimating the kinetic heterotrophic constants in a HMBBR pilot plant using respirometric techniques. The pilot plant was built at the Acqua dei Corsari (Palermo) wastewater treatment plant and consisted of two parallel lines realized in a pre-anoxic scheme, in one of which the carrier material was added to the aerobic reactor with a filling ratio of 30%. [ABSTRACT FROM AUTHOR]

In the past, emission standard indicators have been adopted by environmental regulation authorities in order to preserve the quality of a receiving water body. Such indicators are based on the frequency or magnitude of a polluted discharge that may be continuous or intermittent. In order to properly maintain the quality of receiving waters, the Water Framework Directive, following the basic ideas of British Urban Pollution Manual, has been established. The Directive has overtaken the emission-standard concept, substituting it with the stream-standard concept that fixes discharge limits for each polluting substance depending on the self-depurative characteristics of receiving waters. Stream-standard assessment requires the deployment of measurement campaigns that can be very expensive; furthermore, the measurement campaigns are usually not able to provide a link between the receiving water quality and the polluting sources. Therefore, it would be very useful to find a correlation between the quality status of the natural waters and the emission-based indicators. Thus, this study is aimed to finding a possible connection between the receiving water quality indicators drawn by environmental regulation authorities and emission-based indicators while considering both continuous (i.e. from the wastewater treatment plants) and intermittent pollution discharges (mainly from combined sewer overflows). Such research has been carried out by means of long-term analysis adopting a holistic modelling approach. The different parts of the integrated urban drainage system were modelled by a parsimonious integrated model. The analysis was applied to an ephemeral river bounding Bologna (Italy). The study concluded that the correlation between receiving water quality and polluting emissions cannot be generally stated. Nevertheless, specific analyses on polluting emissions were pointed out in the study highlighting cause-effect link between polluting sources and receiving water quality. [ABSTRACT FROM AUTHOR]