Search

A gas jet beam profile monitor was designed for measuring the electron beam at the electron beam test stand (EBTS) for the Hollow electron lens (HEL) and the proton beam in the large hadron collider (LHC). It is partially installed in the LHC during the second long shutdown. The current monitor is tailored to the accelerator environment including vacuum, geometry, and magnetic field for both the EBTS and the LHC. It features a compact design, a higher gas jet density, and a wider curtain size for a better integration time and a larger detecting range. In this contribution, the commissioning of this monitor at the Cockcroft Institute will be discussed., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

For the accelerator-based future of high energy physics at the energy frontier, CERN started to investigate a 92 km circumference Future Circular Collider (FCC), as e⁺/e⁻ collider the FCC-ee will operate at beam energies up to 182.5 GeV. Beside the machine operational aspects, beam instrumentation will play a key role in verifying and optimizing the machine to achieve the ambitious beam parameters and quality. This paper gives a brief overview of the various challenges to develop the required beam instruments, with focus on beam position, beam size and bunch length measurements, and well as an outline of the planned R activities., Proceedings of the 65th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders, eeFACT2022, Frascati, Italy

The Advanced Wakefield Experiment (AWAKE) at CERN investigates the Plasma-Wakefield acceleration of electrons driven by a relativistic proton bunch. After successfully demonstrating the acceleration process in the AWAKE Run 1, the experiment has now started the Run 2. The AWAKE Run 2 consists of several experimental periods that aim to demonstrate the feasibility of the AWAKE concept beyond the acceleration experiment, showing its feasibility as accelerator for particle physics application. As part of these developments, a dramatic effort in improving the AWAKE instrumentation is sustained. This contribution reports on the current developments of the instrumentation pool upgrade, including the digital camera system for transverse beam profile measurement, beam halo measurement and the spectrometer upgrade studies. The studies on the development of high-frequency beam position monitors are also described., Proceedings of the 13th International Particle Accelerator Conference, IPAC2022, Bangkok, Thailand

The Beam Gas Vertex (BGV) instrument is a novel non-invasive transverse beam profile monitor under development for the High Luminosity Upgrade of the Large Hadron Collider (HL-LHC). Its principle is based on the reconstruction of the tracks and vertices issued from beam-gas inelastic hadronic interactions. The instrument is currently in the design phase, and will consist of a gas target, a forward tracking detector installed outside the beam vacuum chamber and computing resources dedicated to event reconstruction. The transverse beam profile image will then be inferred from the spatial distribution of the reconstructed vertices. With this method, the BGV should be able to provide bunch-by-bunch measurement of the beam size, together with a beam profile image throughout the whole LHC energy cycle, and independently of the beam intensity. This contribution describes the design of the gas target system and of the gas tank of the future instrument., Proceedings of the 11th International Beam Instrumentation Conference, IBIC2022, Kraków, Poland

An Electro-Optic Beam Position Monitor (EO-BPM) is being developed as a high-frequency (up to 10 GHz) diagnostic for crabbing and Head-Tail intra-bunch detection at the HL-LHC. Following an earlier prototype at the SPS that demonstrated single-pickup signals, an upgraded design of an interferometric EO-BPM has been beam-tested at the HiRadMat facility for validation and characterisation studies. In the new design, the fibre-coupled Mach-Zehnder interferometer arms are modulated by lithium niobate waveguides integrated in an upgraded opto-mechanical arrangement that has been developed to produce a highly magnified image field replica of the passing Coulomb field. A new detection technique that is directly sensitive to the interferometric optical difference signal from opposite EO buttons has been applied to measure single-shot bunches for the first time. A transverse resolution study over a ±20 mm range at 3 GHz bandwidth produced the first successful electro-optic bunch-by-bunch position measurement at the HiRadMat in-air extraction line. The results of this campaign show promise for an in-vacuum design that is in production for beam tests at the SPS during Run-3 of the LHC., Proceedings of the 11th International Beam Instrumentation Conference, IBIC2022, Kraków, Poland

The Beam Gas Vertex (BGV) instrument is a non-invasive transverse beam profile monitor being designed as part of the High Luminosity Upgrade of the LHC (HL-LHC) at CERN. Its aim is to continuously measure bunch-by-bunch beam profiles, independent of beam intensity, throughout the LHC cycle. The primary components of the BGV monitor are a gas target and a forward tracking detector. Secondary particles emerging from inelastic beam-gas interactions are detected by the tracker. The beam profile is then inferred from the spatial distribution of reconstructed vertices of said interactions. Based on insights and conclusions acquired by a demonstrator device that was operated in the LHC during Run 2, a new design is being developed to fulfill the HL-LHC specifications. This contribution describes the status of the simulation studies being performed to evaluate the impact of design parameters on the instrument’s performance and identify gas target and tracker requirements., Proceedings of the 12th International Particle Accelerator Conference, IPAC2021, Campinas, SP, Brazil

A high bandwidth electro-optical beam position monitor is under development for the High Luminosity LHC. A series of measurements of the electro-optic signals were previously obtained by an EO-BPM prototype installed in the SPS. This paper focuses on an advanced design that would further improve the sensitivity of the pick-up by optimising the shape of the metallic electrode mounted onto the crystal. The proposed upgraded electro-optic pickups significantly increase the image field profile of the passing bunch inside a lithium niobate crystal embedded within the pickup. This work is based on parametric studies, performed using CST particle studio, investigating various electro-optic (electrode and crystal) configurations. We present the expected performance of the different designs, alongside with their evaluation on a test bench, highlighting the most relevant choice for a prototype pick-up to be installed on LHC, Proceedings of the 10th Int. Particle Accelerator Conf., IPAC2019, Melbourne, Australia

Since 2016 a prototype electro-optic pickup has been installed on the SPS as part of the ongoing development of a high bandwidth electro-optic beam position monitor for the High Luminosity LHC. Following the success of initial beam signal observations with the prototype, improvements of the sensitivity and stability of the pickup have become the main focus of the project. A new concept has been developed which uses an interferometric technique to measure the image field of a passing bunch. One arm of an interferometer passes through an electro-optic lithium niobate crystal, embedded in a pickup, whereas the other arm bypasses. The recombination after the pickup results in an interference pattern that changes as a bunch passes by, due to the electro-optic response of the crystal to the image field. This technique enhances the sensitivity to the field and improves control of the working point. Results from high intensity beams at the SPS are presented. These include a comparison between two different interferometric configurations that were tested on different pickups with similar beam conditions. The stability is assessed by frequency scanning interferometry during beam operation., Proceedings of the 8th International Beam Instrumentation Conference, IBIC2019, Malmö, Sweden

When a relativistic charged particle travels at a short distance from the surface of dielectric material Cherenkov Diffraction Radiation (ChDR) is produced inside the dielectric. Recent observation of incoherent ChDR in the visible spectrum has opened the possibility of using this radiation for non-invasive beam size and position measurements. An experimental test to study this technique for highly directional beam position measurement has been initiated on the CLEAR facility at CERN, whilst another experimental investigation is underway at the Accelerator Test Facility 2 (ATF2) at KEK, Japan, to measure the resolution limit of ChDR for beam imaging diagnostics. This contribution presents the latest experimental results from both of these test facilities., Proceedings of the 10th Int. Particle Accelerator Conf., IPAC2019, Melbourne, Australia

Intra-bunch transverse instabilities are routinely measured in the LHC using a "Head-Tail Monitor" based on sampling a wide-band BPM with a high-speed digitiser. However, these measurements are limited by the dynamic range and short record length possible with typical commercial oscilloscopes. This paper will present the initial results from the LHC Multi-Band Instability Monitor, a new technique developed to provide information on the beam stability with a high dynamic range using frequency domain analysis of the transverse beam spectrum., Proceedings of the 7\textsuperscript{th} Int. Beam Instrumentation Conf., IBIC2018, Shanghai, China

During the last three years, the emission of Cherenkov Diffraction Radiation (ChDR), appearing when a relativistic charged particle moves in the vicinity of a dielectric medium, has been investigated with the aim of providing non-invasive beam diagnostics. ChDR has very interesting properties, with a large number of photons emitted in a narrow and well-defined solid angle, providing excellent conditions for detection with very little background. This contribution will present a collection of recent beam measurements performed at several facilities such as the Cornell Electron Storage Ring, the Advanced Test Facility 2 at KEK, the Diamond light source in the UK and the CLEAR test facility at CERN. Those results, complemented with simulations, suggest that the use of both incoherent and coherent emission of Cherenkov diffraction radiation could open up new beam instrumentation possibilities for relativistic charged particle beams., Proceedings of the 8th International Beam Instrumentation Conference, IBIC2019, Malmö, Sweden

The new "CERN Linear Electron Accelerator for Research" (CLEAR) facility at CERN started its operation in fall 2017. CLEAR results from the conversion of the CALIFES beam line of the former CLIC Test Facility (CTF3) into a new testbed for general accelerator R&D and component studies for existing and possible future accelerator applications. CLEAR can provide a stable and reliable electron beam from 60 to 220 MeV in single or multi bunch configuration at 1.5 GHz. The experimental program includes studies for high gradient acceleration methods, e.g. for CLIC X-band and plasma technology, prototyping and validation of accelerator components, e.g. for the HL-LHC upgrade, and irradiation test capabilities for characterization of electronic components and for medical applications. An overview of the facility capabilities and a summary of the latest results will be presented., Proceedings of the 9th Int. Particle Accelerator Conf., IPAC2018, Vancouver, BC, Canada

Based on recent measurements of incoherent Cherenkov Diffraction Radiation (ChDR) performed on the Cornell Electron Storage Ring, we present here a concept for the centering of charged particle beams when passing close to dielectric material. This would find applications as beam instrumentation in dielectric capillary tubes, typically used in novel accelerating technologies, as well as in collimators using bent crystals for high-energy, high-intensity hadron beams, such as the Large Hadron Collid-er or Future Circular Collider. As a charged particle beam travels at a distance of a few mm or less from the surface of a dielectric material, incoherent ChDR is produced inside the dielectric. The photons are emitted at a large and well-defined angle that allows their detection with a limited contribution of background light. A set of ChDR detectors distributed around a dielectric would enable both the beam position and tilt angle to be measured with a good resolution., Proceedings of the 9th Int. Particle Accelerator Conf., IPAC2018, Vancouver, BC, Canada

The LHC beam dump system relies on extraction kickers that need 3 microseconds to rise up to their nominal field. As a consequence, particles crossing the kickers during this rise time will not be dumped properly. The proton population during this time should remain below quench and damage limits at all times. A specific monitor has been designed to measure the particle population in this gap. It is based on the detection of Synchrotron radiation using a gated photomultiplier. Since the quench and damage limits change with the beam energy, the acceptable population in the abort gap and the settings of the monitor must be adapted accordingly. This paper presents the design of the monitor, the calibration procedure and the detector performance with beam., Proceedings of the 1st International Particle Accelerator Conference, IPAC2010, Kyoto, Japan

To improve the quality of the CLIC Test Facility 3 drive beam, it has been proposed that a photo injector replaces the actual thermionic gun. This would produce a lower emittance beam and minimize beam losses in the injector since the RF bunching and sub-harmonic bunching systems would not be needed anymore. Such a photo injector, named PHIN, is currently being developed at CERN. One of the difficulties is to provide a high intensity beam (3.5A) with a stable (0.1%) beam energy over 1.5us as well as a relative energy spread less than 1%. A 90° spectrometer line featuring a segmented dump and an Optical Transition Radiation screen has been constructed and commissioned in order to study the time evolution of the beam energy along the pulse duration. In the following paper, we present the design as well as the results from the previous two PHIN runs., Proceedings of the 1st International Particle Accelerator Conference, IPAC2010, Kyoto, Japan

A setup for the investigation of Coherent Diffraction Radiation (CDR) from a conducting screen as a tool for non-invasive longitudinal electron beam profile diagnostics has been designed and installed in the Combiner Ring Measurement (CRM) line of the CLIC Test Facility (CTF3, CERN). In this report the status of the monitor development and results on the interferometric measurements of CDR spectra are presented. The CDR signal correlation with an RF pickup and a streak camera is reported. The future plans for the system improvements are also discussed., Proceedings of the 1st International Particle Accelerator Conference, IPAC2010, Kyoto, Japan

On the Large Hadron Collider (LHC), the continuous monitoring of the transverse sizes of the beams relies on the use of synchrotron radiation and intensified video cameras. Depending on the beam energy different synchrotron light sources must be used. A dedicated superconducting undulator has been built for low beam energies (450 GeV to 3 TeV), while edge and centre radiation from a beam separation dipole magnet are used respectively for intermediate and high energies (up to 7 TeV). The emitted visible photons are collected using a retractable mirror, which sends the light into an optical system adapted for acquisition using intensified CCD cameras. This paper presents the performance of the imaging system in terms of spatial resolution, and comments on the light intensity obtained and the cross calibration performed with the wire scanners. Upgrades and future plans are also discussed., Proceedings of the 1st International Particle Accelerator Conference, IPAC2010, Kyoto, Japan

The high charge PHIN photo injector is studied at CERN as an electron source for the CLIC Test Facility (CTF3) drive beam as an alternative to the present thermionic gun. The objective of PHIN is to demonstrate the feasibility of a laser-based electron source for CLIC. The photo injector operates with a 2.5 cell, 3 GHz RF gun using a Cs₂Te photocathode illuminated by UV laser pulses generated by amplifying and frequency quadrupling the signal from a Nd:YLF oscillator running at 1.5GHz. The challenge is to generate a beam structure of 1908μbunches with 2.33nC perμbunch at 1.5GHz leading to a high integrated train charge of 4446nC and nominal beam energy of 5.5MeV with current stability below 1%. In the present test stand, a segmented beam dump has been implemented allowing a time resolved measurement of the energy and energy spread of the electron beam. In this paper we report and discuss the measured transverse and longitudinal beam parameters for both the full and time gated train of bunches, and the obtained photocathode quantum efficiency. Laser pointing and amplitude stability results are discussed taking into account correlation between laser and electron beam., Proceedings of the 1st International Particle Accelerator Conference, IPAC2010, Kyoto, Japan