Search

Background: Olive, as a non-climacteric fruit, is presumed to be ethylene independent with regard to ripening triggering/coordination. Nevertheless, studies have demonstrated that postharvest ethylene treatments induce changes in composition and properties also of non-climacteric fruits, including aroma profiles, a key quality parameter of extra virgin olive oils. Olive fruit of cv. 'Leccino' harvested at two distinct ripening stages (less advanced ripening, LAR; and more advanced ripening, MAR, with Jaén index of 4.58 and 5.10, respectively) were subjected to ethylene (1000 ppm in air) treatment for 24 h before oil extraction., Results: Based on multivariate analysis of volatile organic compound (VOCs), the effect of ethylene treatment appeared to be more pronounced in MAR samples. However, differences in organoleptic analysis were also detected in ethylene-treated LAR olive oils. Ethylene seems to selectively affect linolenic/linoleic acid metabolism, particularly concerning the C5 pathway, and reduce specific defect-associated compounds., Conclusion: Exogenous ethylene applied to cv. 'Leccino' olives before processing was effective in inducing specific changes in the VOC profiles of the resulting oil. The effect was different depending on the ripening stage of the harvested olives. The lipoxygenase pathway (including the production of C5 compounds) and fermentative-related compounds appeared to be affected by the treatment. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

Background: Calcium is a preservative and firming agent largely used in the table olive industry. Foliar applications of calcium (as calcium chloride, CaCl 2 ) before harvest have been proposed in other fruits to increase firmness and reduce physiological disorders or internal damage. However, there is still a shortage of information regarding the source, the concentration, the number, and the period of calcium application onto the canopy to get an effective response of olive quality. In this study, we aimed to investigate the effect of two concentrations of CaCl 2 foliar treatments (0.5% and 1.0%), applied at different stages of fruit development (at the end of fruit set, end of pit hardening, and prior to harvesting), on olive quality for two varieties ('Manzanilla de Sevilla' and 'Ascolanta tenera'), cultivated in two different geographical areas (Spain and Italy respectively)., Results: The calcium concentrations applied enhanced the fruit calcium content and decreased sodium and potassium. They also improved the mechanical properties without modifying fruit morphology or cuticle thickness; nor did they cause phytotoxicity. Foliar treatments increased the oil content in the pulp (dry weight basis) and the amount of hydroxytyrosol, tyrosol, and oleuropein, among other phenols., Conclusion: Calcium foliar applications during fruit development effectively increase olive quality. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

Background: The use of healthy olives and their good management along the production process are necessary to obtain the best quality virgin olive oils. One parameter related to the health of the olives is the content of fatty acid alkyl esters. Because these come from the esterification of C16 and C18 free fatty acids with short chain alcohols, the control of methanol, ethanol and acetaldehyde (precursor of ethanol) and their origin (endogenous or from fermentation) is essential. The present study reports the endogenous amount of these compounds in some of the main Spanish olive varieties. For their analyses, headspace solid phase micro-extraction was applied and, to ensure quantitation reliability, the matrix-matched technique was used to build the calibration lines., Results: For healthy and mature olives, the contents of ethanol and methanol are much higher and vary within a wider range than those corresponding to acetaldehyde. Because olives were not directly analyzed but previously homogenized, there was no correlation between the olive size parameters and the contents of the compounds investigated. However, these contents are characteristic of each variety. When comparing healthy and unhealthy olives, significant differences were only observed for ethanol contents., Conclusion: Higher contents of short alcohols are not only the result of an unhealthy or poor state of the fruits, but also the variety. Therefore, because these alcohols are precursors of fatty acid alkyl esters, the maximum permissible content of the latter should not be set at a single value for all olive varieties. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

Squalene (SQ) is an intermediate hydrocarbon in the biosynthesis of phytosterols and terpenes in plants. It is widely used for applications such as skin moisturizers, vaccines, or in carriers for active lipophilic molecules. It has commonly been obtained from sharks, but restrictions on their use have created a need to find alternative sources. We present a review of studies concerning SQ in olive groves to characterize its content and to provide new aspects that may increase the circular economy of the olive tree. There is a large variation in SQ content in virgin olive oil due to cultivars and agronomic issues such as region, climate, types of soil, crop practices, and harvest date. Cultivars with the highest SQ content in their virgin olive oil were 'Nocellara de Belice', 'Drobnica', 'Souri', and 'Oblica'. An interaction between cultivar and aspects such as irrigation practices or agricultural season is frequently observed. Likewise, the production of high SQ content needs precise control of fruit maturation. Leaves represent an interesting source, if its extraction and yield compensate for the expenses of their disposal. Supercritical carbon dioxide extraction from olive oil deodorizer distillates offers an opportunity to obtain high-purity SQ from this derivative. Exploiting SQ obtained from olive groves for the pharmaceutical or cosmetic industries poses new challenges and opportunities to add value and recycle by-products. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

Background: 'Arauco' is the only autochthonous olive cultivar from Argentina. Little has been reported so far regarding the management of this crop. In this work, variations in fruit and chemical characteristics of olives harvested over a wide range of dates and seasons are reported for this cultivar at two sites in Mendoza province in central west Argentina., Results: During the harvest periods studied, fruit oil content on a dry basis remained at its maximum and was stable, but fruit oil content on fresh basis increased as water content decreased with delay in harvest date. Harvest date affected the maturity index of fruits as well as the oxidative stability and phenolic content of oil. In contrast, the fatty acid profile was not consistently affected by harvest date. Environmental conditions, mainly the occurrence and intensity of frosts, strongly influenced oil quality as well as maturity with delay in harvest date., Conclusion: The most appropriate harvest time to obtain Arauco oil with a high oil yield and good chemical quality was before mid-May and with maturity index lower than 2. Fruits harvested after mid-May were exposed to minimum temperatures between -1.2 °C and - 4.0 °C, producing oil with low phenolic compounds and oxidative stability. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

Background: Cropping practices focusing on agronomic water use efficiency and their impact on quality parameters must be investigated to overcome constraints affecting olive groves. We evaluated the response of olive trees (Olea europaea, cv. 'Cobrançosa') to different water regimes: full irrigation (FI, 100% crop evapotranspiration (ET c )), and three deficit irrigation strategies (DIS) (regulated (RDI, irrigated with 80% of crop evapotranspiration (ET c ) in phases I and III of fruit growth and 10% of ET c in the pit hardening stage), and two continuous sustained strategies (SDI) - a conventional SDI (27.5% of ET c ), and low-frequency irrigation adopted by the farmer (SDIAF, 21.2% of ET c )., Results: The effects of water regimes on the plant water status, photosynthetic performance, metabolite fluctuations and fruit quality parameters were evaluated. All DIS treatments enhanced leaf tissue density; RDI and SDI generally did not affect leaf water status and maintained photosynthetic machinery working properly, and the SDIAF treatment impaired olive tree physiological indicators. The DIS treatments maintained the levels of primary metabolites in leaves, but SDIAF plants showed signs of oxidative stress. Moreover, DIS treatments led to changes in the secondary metabolism, both in leaves and in fruits, with increased total phenolic compounds, ortho-diphenols, and flavonoid concentration, and higher total antioxidant capacity, as well higher oil content. Phenolic profiles showed the relevance of an early harvest in order to obtain higher oleuropein levels with associated higher health benefits., Conclusion: Adequate DIS are essential for sustainable olive growing, as they enhance the competitiveness of the sector in terms of olive production and associated quality parameters. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

Background: Irrigation of olives increases fruit and oil yields. Due to scarcity of freshwater, low-quality water including recycled wastewater (RWW) is utilized in orchards. Here, effects of irrigation with RWW and of fertilization on the composition and quality of olive oil were studied., Results: Long-term RWW irrigation of 'Barnea' and 'Leccino' olive had no significant negative effects on either oil composition or quality parameters, including free fatty acids (FFAs), peroxide value (PV), total phenolics content (TPC), fatty acid profiles and organoleptic characteristics. The average FFA contents for both cultivars were less than 0.8% during most of the experimental period, except the seasons 2009 and 2012-2013 for Barnea where the values were raised up to 1.4%. The measured PV levels were less than 9 and 5 mmol O 2 kg -1 oil for Barnea and Leccino, respectively. In the last season of the experiment for each cultivar, higher TPC were observed in oils obtained from RWW irrigation with reduced fertilization (Re-) as compared to the treatments with the recommended fertilization [freshwater irrigation (Fr) and RWW irrigation (Re+) with standard dose of fertilizers], where the TPC increment exceeded 70% in Barnea and 25% in Leccino. The treatments had only minor effects on the fatty acid profile, reflected in slightly altered levels of C18:2 and C18:3 fatty acids., Conclusion: The use of RWW, combined with the consideration of nutrients arriving with such water to provide appropriate fertilization, was found suitable for olive irrigation to ensure optimal yields while preserving oil quality. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

Background: Heavy metal pollution may act as persistent selective pressure that favors the spread of antimicrobial resistance in natural environments. The aim of this study was to isolate and identify metal-tolerant bacteria from soils in olive tree fields routinely treated with copper-derived compounds and to evaluate the tolerance of bacterial strains to other metals and their resistance to clinically relevant antibiotics., Results: Five hundred and ninety-five bacterial isolates from 45 olive tree agricultural fields were studied. Minimum inhibitory concentrations (MICs) ≥ 16 mmol L -1 were detected for copper (57% of isolates), zinc (37%) and lead (62%), while only 3% had MICs ≥ 12 mmol L -1 for nickel. Ninety-six metal-tolerant strains were selected for identification and antibiotic resistance determination. Most isolates belonged to the genera Pseudomonas (37%), Bacillus (23%) and Chryseobacterium (20%), while 6% were identified as Variovorax, 4% as Stenotrophomonas and 2% as Serratia or Burkholderia. Highest copper tolerance was detected among Pseudomonas. Over 75% of the strains with high copper tolerance were also resistant to vancomycin, 50% to ampicillin and 40% to erythromycin or trimethoprim/sulfamethoxazole., Conclusion: Bacteria from olive soils are tolerant to metals, mainly copper, but also zinc and lead, as well as resistant to clinically important antibiotics, which could be a troublesome issue in clinical settings. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

Background: While both maturity and light exposure are important factors determining olive fruit physiology, the relationship between maturity, canopy position and optimal harvesting time has not been well-studied. To understand the interaction of these factors, olive fruits from upper and lower layers of the canopy were harvested from September to January. Maturity, moisture and fat content of the fruit as well as the quality and minor components of the oil extracted were measured., Results: Lower light interception at the lower canopy positions resulted in differences in the fruits and oil extracted between canopy layers. Upper layer presented 60% of the overall production; fruit had one unit more of maturity index, 3% less moisture and 5% more fat content. Oil extracted from the upper layers presented higher concentration of oleuropein and ligstroside aglycone. Fruits from upper layers at maturity index of two had higher fat content and more total phenols in the oil extracted when compared with fruits from lower layer with the same maturity index., Conclusions: Differences in oil composition between layers do not correlate with differences in the fruit maturity index; instead, fruit position is a determining factor for physiological processes related to fruit growth and oil composition. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

Background: Fatty acids are the major components in extra virgin olive oil, and they are considered as a quality parameter to its authentication. As fraudulent practices are the most important problem in this sector, fast, reliable and cost-effective techniques, such as Raman spectroscopy, have been successfully applied, in combination with chemometrics, to determine the fatty acid profile of oils., Results: The huge amount of information provided by Raman spectra is reduced in a few orthogonal components of principal component analysis (PCA). The goodness-of-fit of the statistical models including only these PCA factors is considerably increased by introducing dummy variables, associated with the harvest, and some agro-climatic variables (temperature, humidity, wind speed, radiation, precipitation and evapotranspiration). Many of these additional variables are statistically relevant in models using either the global sample or subsamples of Andalusian provinces or olive varieties., Conclusions: The regression models using only Raman spectral information are clearly improved by the consideration of harvesting time and agro-climatic data, a useful result as trade standard applying to olive oils limits values for disaggregated fatty acids to authenticate olive oils. Nevertheless, the effect (or the statistical relevance) of these variables depends on the specific type of fatty acid, geographical region (province) or olive variety. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

Background: Three treatments of regulated deficit irrigation (RDI) were assayed on olive trees for table olive production. RDI provides hydroSOStainable crops. The effect of RDI treatments on the quality of raw and table olives was determined based on their: weight, pit weight, fruit/pit ratio, size, texture, colour, mineral content, antioxidant activity, total phenol content and organic acid and sugar profile., Results: HydroSOStainable olives showed the most attractive shape and colour: highest fruit weight, roundest fruit, hardest texture and a lightest and greenest colour than control olives. Minerals, antioxidants, phenols and organic acids and sugars of hydroSOStainable olives were similar to control olives. After processing to table olives, calcium, potassium, antioxidants and phenols contents decreased, whereas sugars and organic acids profiles changed in both types of olives., Conclusions: HydroSOStainable table olives offer environmental and quality advantages over control olives given the reduced use of fresh water and favourable morphological traits, which are more attractive for consumers. © 2018 Society of Chemical Industry., (© 2018 Society of Chemical Industry.)

Background: Olive oil, a functional food, is increasingly produced from trees irrigated with water containing high concentrations of salts. We studied the effects of irrigation-induced salinity on quality and health-related compounds in olive oil. Trees (cv Barnea) were grown in lysimeters with continuous control and monitoring of root-zone salinity. Salinity in the root zone was altered by changing irrigation solution salinity or by changing the extent of leaching. Extracted oil was analyzed for quality parameters including free fatty acid content, polyphenol, tocopherol, sterol and carotenoid levels, fatty acid (FA) profile, and antioxidative capacity., Results: While not all parameters changed, fruit water percentage and fruit oil content significantly decreased with increasing exposure to salt. As salinity increased, there was a desirable rise in measured polyphenol and tocopherol levels and a contrasting undesirable reduction in a number of important compounds, including 16:1 and 18:3 FA., Conclusion: The possible negative effects on olive oil quality due to FA-related parameters should concern producers dependent on, or considering, irrigation with high-salinity water sources. A number of important quality parameters were differentially influenced by the method of inducing the root zone salinity, suggesting that additional environmental variables leading to oxidative responses were affected by the treatments. © 2018 Society of Chemical Industry., (© 2018 Society of Chemical Industry.)

Background: The present study aimed to investigate how olive maturity indices (MI) (2.5, 3.5 and 4.5 MI) affect the aroma, aroma-active compounds, fatty acid profiles and color properties of cv. Nizip Yaglik olive oils. Various techniques for extracting volatiles from oil materials are available in the literature. Aroma compounds were extracted by the solvent-assisted flavor evaporation extraction method for the first time in olive oil., Results: The type and number of aroma-active compounds varied according to maturity periods of olives. A total of 22, 21 and 20 different key odorants were found in aromatic extracts of samples with 2.5, 3.5 and 4.5 MI, respectively. The most potent aroma-active compounds based on flavor dilution (FD) factor values were hexanal (green) for 2.5 MI (FD: 1024) and 3.5 MI (FD: 512), as well as 1-penten-3-ol (green-leafy) for 4.5 MI (FD: 512)., Conclusion: Overall, olive oils obtained from unripe and medium-ripe olives had stronger green and fruity odours compared to ripe olives. Principal component analysis demonstrated that oils were clearly discriminated according to their general physicochemical analysis, fatty acids, aroma profiles and key odorants. The results of the present study show that the olive maturity period has a significant influence on the quality parameters of olive oil. © 2018 Society of Chemical Industry., (© 2018 Society of Chemical Industry.)

Background: The experiment was carried out on olive trees cv. Chemlali, during two successive years (2013/2014). Two irrigation treatments (IT: Trees irrigated with wastewater; TRC: Trees grown under rainfed condition) were combined with two tillage practices (TTS: Trees grown in tilled soil; TNTS: Trees grown in non-tilled soil)., Results: The results of the study showed that wastewater irrigation combined with soil tillage improved the pomological characteristics of olive fruits. The tree yield increase was substantial for IT and TTS. However, most of the identified phenolic compounds, especially oleuropein, mainly accumulated in olive fruits of the TC block (TNTS + TRC), suggesting a marked improvement in the nutritional value of these fruits. Moreover, fruits of TNTS had high contents of sugar compounds, required for the synthesis of the fruit storage material. The study also showed that the agronomic practices affected the amounts of some aromatic compounds responsible for the distinctive flavour notes of olive oil., Conclusion: Agronomic practices may affect considerably the commercial and nutritional values and the sensorial quality of the commodities. © 2017 Society of Chemical Industry., (© 2017 Society of Chemical Industry.)

Background: Fruit development and oil quality in Olea europaea L. are strongly influenced by both light and water availability. In the present study, the simultaneous effects of light environment and irrigation on fruit characteristics and oil quality were studied in a high-density orchard over two consecutive years. Olive fruits were harvested from three canopy positions (intercepting approximately 64%, 42% and 30% of above canopy radiation) of fully-productive trees subjected to full, deficit or complementary irrigation., Results: Fruits receiving 61-67% of above canopy radiation showed the highest fruit weight, mesocarp oil content and maturation index, whereas those intercepting only 27-33% showed the lowest values. Palmitoleic and linoleic acids increased in oils obtained from fruits exposed to high light levels, whereas oleic acid and the oleic-linoleic acid ratio decreased. Neither canopy position, nor irrigation affected K 232 , K 270 , ΔK and the concentration of lignan in virgin olive oils (VOOs). Total phenols, 3,4-DHPEA-EDA [2-(3,4-hydroxyphenyl)ethyl (3S,4E)-4-formyl-3-(2-oxoethyl)hex-4-enoate] and p-HPEA-EDA (decarboxymethyl ligstroside-aglycone) increased in VOOs produced from fruits harvested from the top of the canopy, whereas full irrigation decreased total phenols and 3,4-DHPEA-EDA concentrations with respect to the complementary irrigation treatment., Conclusion: Light and water availability are crucial not only for tree productivity, but also they clearly affect olive oil quality. © 2017 Society of Chemical Industry., (© 2017 Society of Chemical Industry.)

The production of olive oil is considered to be one of the largest agricultural business sectors in the Mediterranean area. Apart from its significant impact on the economies of countries in Southern Europe, Northern Africa and Middle East, olive oil production also involves considerable social and environmental considerations. However, despite such importance, the environmental effects of olive oil production have not been studied as much other agricultural productions and farming systems, which are more characteristic of central and northern Europe. We present a thorough and systematic literature review of scientific publications with respect to the use of environmental tools in the life cycle of olive oil. The analysis takes into consideration the farming of olive trees, the manufacture of olive oil, packaging, transportation and reverse logistics. To that end, journal publications up to 2015 in this specific field are recorded and, at the same time, the most important environmental impacts are revealed and a gap analysis is carried out. The analysis conducted reveals that farming of olive trees (with pesticide use and waste/by-product production being the 'hottest' topics) and the manufacturing of olive oil (concentrating mostly on waste/by-product production and management) are the phases with the highest environmental focus from the scientific community. Moreover, gaps in the literature are detected mostly with respect to fuel consumption and the use and promotion of renewable energy sources in olive oil production. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)

Background: In this study, two types of crusher, hammer and blade, were used to produce olive oils from cv. Correggiolo olives at four stages of ripeness, to analyse the effect of these two factors on oil quality indices (free acidity, peroxide value, UV absorption), on phenolic compounds content and sensory profiles. Differences in chemical and sensory data were analysed by two-way ANOVA., Results: Ripeness exerted a stronger influence than the crushing equipment on quality indices, phenolic content and sensory evaluation; moreover the statistical significance of interaction between the factors considered suggests that they are intertwined. Differences in the texture of olive pastes obtained by squashing and crushing were clearly evident at the first stage of ripeness via observation with a scanning electron microscope. The stronger mechanical action of the hammer crusher also produced smaller pit fragments compared to the blade crusher, as shown by particle size analysis of the kernels fragments., Conclusion: Knowledge about the interaction between ripening and crushing will allow olive oil producers to pursue a product of the quality most suitable for a particular type of consumer. For example, bitterness and pungency, characters recently connected with health effects because sensory markers of extra virgin olive oil (EVOO) polyphenols, do not have a great sensory appeal for most consumers; however, there is a niche of gourmet estimators interested in these peculiar flavours and ready to pay a premium price for them. The producer will be able to customise the EVOO by modulating its chemical and sensory characteristics, especially the phenolic fraction, thus addressing the needs of consumers with different tastes. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)

Background: Regulated deficit irrigation (RDI) is used in hedgerow olive orchards to achieve a sustainable balance between water savings, tree vigor and oil production. Its effects on the presence of compounds responsible for the taste of the oil and its nutritional value are controversial. The present 3-year study was conducted in an 'Arbequina' orchard (1667 trees ha -1 ) under a full irrigation (FI) treatment (470.1 mm year -1 of water) and two RDI treatments scaled to replace 60% and 30%, respectively, of FI. The quality parameters, antioxidant contents and volatiles of the extracted virgin olive oil (VOO) were analyzed., Results: In general, oils from the 30% RDI treatment had higher contents of pigments and phenolic compounds, a higher oleic/linoleic ratio and the highest oxidative stability, despite their lower tocopherol content. FI oils showed higher (E)-2-hexenal, 1-penten-3-one, ocimene, E-2-pentenal and pentene dimer contents than 30RDI oils, but lower contents of (E)-2-pentenol and volatile esters., Conclusion: The results of the present study suggest that a RDI strategy supplying 30% of the total irrigation needs induces an increase in natural antioxidants in VOO. Neither yield, nor the rest of the quality parameters were affected by the reduced irrigation. However, abundant autumn precipitation can over-ride these effects of 30% RDI treatment on oil quality. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)

Background: Olive oil contains compounds with interesting biological activities which are influenced by the cultivar, the geographic origin and other factors. The aims of this work were to (1) investigate these factors in Neb Jmel olive oil from various Tunisian origins; (2) determine the influence of geographic conditions on phenolic composition of Neb Jmel olive oil and consequently on the antioxidant compounds; and (3) verify whether oils could be discriminated based on geographical origin., Results: The characterisation of extra-virgin Neb Jmel olive oil produced in its original location has been conducted. Owing to the effect of the genotype and environmental, agronomic and technological factors on the chemical composition of olive oil and its quality, all studied olives were collected at the same season, and their oil obtained under the same processing technique. Many analyses were carried out to characterise the different olive oils: free acidity, peroxide value, fatty acid composition, Rancimat assay, pigments content and phenolic compounds by (1) H NMR. A recently developed method for the direct measurement of the oleocanthal and oleacein levels in olive oil by quantitative (1) H NMR was applied. The method was applied to the study of four Neb Jmel olive oils samples, and a broad variation of concentrations of all four secoiridoids was recorded. The concentration of each ranged from 55 to 529 mg kg(-1) and the sum of the four major secoiridoids (known as D3) ranged from 436 to 1063 mg kg(-1) ., Conclusion: The quantification of major phenolic compounds of olive oil by NMR indicated that environmental conditions influence the production of qualitative phenolic fractions. All these compounds can be used as base 'markers' to characterise and differentiate these olive oil on geographic origin. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)

Background: Olives dropped on the ground naturally sometimes are not separated from those fresh and healthy collected from the tree for harvest and processing. In this work we compared the quality, ethanol content and bioactive components of virgin olive oils from ground-picked olives, tree-picked fruits and their mixture., Results: Ground-picked olives produced 'Lampante' virgin olive oils; these are of a lower quality category, because of important alterations in chemical and sensory characteristics. Ethyl esters showed the highest values, although under the regulated limit. The mixture of ground and tree-picked olives gave oils classified as 'virgin' because of sensory defects, although the quality parameters did not exceed the limits for the 'extra' category. Ethanol content showed a significant increase in the oils from ground- picked olives and their mixture with respect to those from tree-picked fruits. Furthermore, bioactive compounds showed a significant decrease as fruit quality was poorer., Conclusion: Ground-picked olives must be harvested and processed separately since they produce low-quality virgin olive oils with sensory defects and lower concentrations of bioactive compounds. The higher acidity and ethanol concentration observed in oils from ground-picked fruits or their mixture may help ethyl ester synthesis during storage. © 2015 Society of Chemical Industry., (© 2015 Society of Chemical Industry.)

Background: This study involved two commercial orchards located in Limarí Valley and Molina from two important Chilean production zones of extra virgin olive oil (EVOO). The investigation evaluated the effects of climate, soil composition, agricultural practices (fertilization and irrigation) and variety (considering two harvests) on the compounds responsible for the flavor of EVOO (volatiles and phenols) and how these compounds can explain the differences in chemical profiles by geographical origin, cultivar and fruit ripeness stage., Results: Varieties from the Limarí Valley presented the highest content of phenolic compounds. A significant relationship (P < 0.05) between volatile compounds and climate indicated that the compounds produced via the lipoxygenase cascade were affected by the maximum temperature and, to a lesser extent, by evapo-transpiration and irrigation. The selection of different individual phenolic and volatile compounds independently allowed the significant differentiation of EVOOs, principally by geographical origin, crop season, fruit ripeness stage and, in a few cases, by cultivar., Conclusion: Soil and climate of the Chilean regions have much more influence than cultivars on the concentration of sensory quality compounds. Difference in latitude between orchards increases the importance of the geographical origin on the virgin olive oil chemical composition while full irrigation decreases the impact of the cultivar., (© 2015 Society of Chemical Industry.)

Background: Iron (Fe) deficiency chlorosis, a major nutritional problem in plants growing on calcareous soils, is related to the content and reactivity of soil iron oxides and carbonates. The effects of other soil components, however, need elucidation. In this paper we tested the hypothesis that application of high doses of phosphorus (P) to the soil can aggravate Fe chlorosis., Results: Lupin and sorghum were grown on 24 calcareous soils. Leaf chlorophyll concentration (LCC) in lupin decreased with increasing available P/available Fe ratio in the native soil but LCC in sorghum was unaffected by that ratio. Application of P to the soil resulted in significant reduction of LCC and dry weight in lupin. In sorghum, LCC and dry weight were positively affected by P fertilisation for soils poor in available P whereas the opposite effect was generally observed for the P-rich soils. In another experiment where olive plants were pot-grown on two soils during the 2009–2011 period, P fertilisation affected LCC negatively only in 2009 and 2011 and in the soil that was poorer in iron oxides., Conclusion: Application of fertiliser P to Fe chlorosis-inducing soils is likely to aggravate this deficiency. However, this effect depends on the plant and the Fe and P statuses of the soil., (© 2014 Society of Chemical Industry.)

Background: Hurma, an olive variety that grows in a specific area in Turkey, loses its bitterness before harvesting, and therefore does not need further processing steps for the production of table olives. The total phenol content and phenolic profiles of (1) this naturally debittered olive type, Hurma; (2) the same olive variety, but not a naturally debittered type, Erkence; and (3) another variety, Gemlik, which is commonly consumed as table olive, were determined during their maturation period for two harvest years., Results: The total phenol content of Hurma is the lowest compared to the other types regardless of harvest year, which has a significant effect on the phenolic content and composition of individual components for all olive types. All three olive types can be differentiated from each other especially during the late phase of maturation using the phenolics profile in combination with principal component analysis., Conclusion: The natural debittering phenomenon of Hurma olive on the tree involves a decrease in phenol content and a change in phenol composition. The differentiation in phenol composition especially becomes very significant in the late of period of maturation., (© 2013 Society of Chemical Industry.)

Background: The aim of this work was to evaluate the evolution of the quality of extra virgin olive oil obtained from a super-high-density Arbequina orchard, under a drip irrigation system, throughout the ripening process. For this objective, physicochemical, nutritional and sensory parameters were studied. In addition, the oxidative stability, pigment content and colour evolution of olive oil were analysed during the ripening process., Results: Free acidity increased slightly throughout the ripening process, while peroxide value and extinction coefficient decreased. Total phenol content and oxidative stability showed a similar trend, increasing at the beginning of ripening up to a maximum and thereafter decreasing. α-Tocopherol and pigment contents decreased with ripening, leading to changes in colour coordinates. Sensory parameters were correlated with total phenol content, following a similar trend throughout the maturation process., Conclusion: By sampling and monitoring the ripeness index weekly, it would be possible to determine an optimal harvesting time for olives according to the industrial yield and the physicochemical, nutritional and sensory properties of the olive oil., (© 2012 Society of Chemical Industry.)

Background: The characterisation of virgin olive oils from two Tunisian cultivars, growing in the Tataouin zone, namely Jemri-Bouchouka, a rare olive cultivar, and Chemlali-Tataouin, was carried out. Several analytical parameters were evaluated; these include quality index, fatty acids, phenolic, chlorophyll, carotenoid, squalene, α-tocopherol compositions and oxidative stability., Results: Jemri-Bouchouka olive oil had the highest value of oleic acid (74.50%) while Chemlali-Tataouin olive oil had the highest value of oleic acid (69.39 %) and also was characterized by a high percentage of palmitic acid (14.75 %) which makes this oil freeze at a low temperature [corrected]. On the other hand, Jemri-Bouchouka oil was characterised by a low phenolic and α-tocopherol content (267.72 mg GAE kg⁻¹ and 278.34 mg kg⁻¹, respectively). Ten phenolic compounds were identified. The main phenols found in the two olive oils were oleuropein aglycon and pinoresinol. All phenolic compounds showed significant correlations with oxidative stability., Conclusion: The analytical parameters of virgin olive oil that were determined in this study were greatly influenced by cultivar., (© 2012 Society of Chemical Industry.)

Background: Understanding the relationships between olive cultivars and the cultivation environment as well as optimising cultivation choices can lead to maximum expression of oil production in terms of both quantity and quality. For this purpose, samples of the Ortice olive cultivar grown in two different environments in southern Italy at altitudes of 500 and 50 m above sea level (a.s.l.) were harvested on various dates to monitor drupe maturation and determine the nutritional and chemical characteristics of the oils., Results: Fruits grown at 50 m a.s.l. ripened about 10-15 days earlier than those grown at 500 m a.s.l. The oil obtained at 500 m a.s.l. was characterised by a higher content of total polyphenols and a higher content of oleic and stearic acids., Conclusion: The different heat accumulation related to the environment affected drupe development as well as the colouring trend and oil content. Consequently, the growth environment changed the content of Ortice oil fatty acids and polyphenols, while the flavour profile remained fairly stable in both environments, with the cultivar effect prevailing over the environment factor., (© 2012 Society of Chemical Industry.)

Background: Recently, diets rich in natural foods and food-derived components, such as phenolic compounds, have received a great deal of attention because they are perceived as 'safe' and 'non-medicinal'. In fact, some are known to function as chemopreventive agents against oxidative damage, cerebrovascular disease, and aging., Results: Phenolic compounds, natural antioxidants present in virgin olive oil, play an important role in oil quality by contributing significantly to protecting oil stability against oxidation. In addition, polyphenols are the main contributors to olive oil bitterness, astringency and pungency. The data were fit by linear regression, giving Rancimat stability (h) = 0.18× Total polyphenols (mg L(-1)) in the virgin olive oil., Conclusions: The practice of harvesting ripe olives as soon as possible to produce oils of high phenolic contents and thus high oxidative stability implies bitter and piquant oils, this being admissible for oils of some varieties but detrimental to others appreciated in the market for being more fruity and sweeter., (2010 Society of Chemical Industry)

Background: The aim of the present work was to investigate the influence of fruit ripening on oil quality in an attempt to establish an optimum harvesting time for Chétoui olives, the second main olive variety cultivated in Tunisia., Results: Our results showed that many analytical parameters, i.e., peroxide value, UV absorbance at 232 and 270 nm, chlorophyll pigments, carotenoids and oleic acid contents decreased during ripening, whilst oil content and linolenic acid increased. Free acidity remained practically stable with a very slight rise at the highest maturity index. The trend of oxidative stability, total phenols and o-diphenols, showed an increase at the early stages followed by a reduction at more advanced stages of maturity. The major phenolic compounds, such as hydroxytyrosol, ligstroside aglycon, elenolic acid, acetoxy-pinoresinol and oleuropein aglycon, seemed to have the same behaviour. In the case of tyrosol, a strong decrease was observed directly related with the ripening progress., Conclusion: On the basis of the evolution of the analytical parameters studied, the best stage of Chétoui olive fruits for oil processing seems to be at ripeness index higher than 2.0 and lower than 3.0., ((c) 2009 Society of Chemical Industry.)