Search

Objectives: The purpose of this study was to evaluate the temperature changes during implant osteotomies with a combined irrigation system as compared to the commonly used external and internal irrigation under standardized conditions., Material and Methods: Drilling procedures were performed on VII bovine ribs using a computer-aided surgical system that ensured automated intermittent drilling cycles to simulate clinical conditions. A total of 320 drilling osteotomies were performed with twist (2 mm) and conical implant drills (3.5/4.3/5 mm) at various drilling depths (10/16 mm) and with different saline irrigation (50 ml/min) methods (without/external/internal/combined). Temperature changes were recorded in real time by two custom-built thermoprobes with 14 temperature sensors (7 sensors/thermoprobe) at defined measuring depths., Results: The highest temperature increase during osteotomies was observed without any coolant irrigation (median, 8.01°C), followed by commonly used external saline irrigation (median, 2.60°C), combined irrigation (median, 1.51°C) and ultimately with internal saline irrigation (median, 1.48°C). Temperature increase with different drill diameters showed significant differences (P < 0.05) regarding drill depth, confirming drill depth and time of drilling as influencing factors of heat generation. Internal saline irrigation showed a significantly smaller temperature increase (P < 0.05) compared with combined and external irrigation. A combined irrigation procedure appears to be preferable (P < 0.05) to an external irrigation method primarily with higher osteotomy depths., Conclusions: Combined irrigation provides sufficient reduction in temperature changes during drilling, and it may be more beneficial in deeper site osteotomies. Further studies to optimize the effects of a combined irrigation are needed., (© 2012 John Wiley & Sons A/S.)

Objectives: Based on a novel standardized bovine specimen, the aim of this study was to investigate thermal effects of different irrigation methods during intermittent and graduated drilling., Material and Methods: Temperature changes during implant osteotomies (n = 320) of 10 and 16 mm drilling depths with various irrigation methods were investigated on manufactured uniform bone samples providing homogenous cortical and cancellous areas and analogous thermal conductivity comparable to human bone. Automated sequences were performed with surgical twist drills of 2 mm ∅ and conical drills of 3.5, 4.3 and 5 mm ∅. Real-time recording of temperature increase was done using two custom-built multichannel thermoprobes with 14 temperature sensors at a predefined distance of 1 and 2 mm to the final osteotomy. The effects of drilling depth, drilling diameter and irrigation methods on temperature changes were investigated by a linear mixed model., Results: Using this uniform bone specimen, the greatest temperature rise was observed without any coolant supply with 29.87°C, followed by external with 28.47°C and then internal with 25.86°C and combined irrigation with 25.68°C. Significant differences (P ≤ 0.0156) between drill depths of 10 vs. 16 mm could be observed with all irrigation methods evaluated. With each of the irrigation methods, significantly higher temperature changes (P < 0.0001) during osteotomies could be observed between twist drills of 2 mm ∅ and conical drills of 3.5, 4.3 and 5 mm ∅. During 10 and 16 mm drilling osteotomies, external irrigation showed significantly higher temperatures (P < 0.05) for all conical drills compared with internal or combined irrigation, respectively. Significantly lower temperatures (P < 0.05) could be detected with internal or combined irrigation for the use of conical drills with various diameters and drilling depths., Conclusions: This fully standardized bone model provides optimized comparability for the evaluation of bone osteotomies and resulting temperature changes. As regards the efficiency of the various irrigation methods, it could be demonstrated that internal and combined irrigation appears to be more beneficial than external irrigation., (© 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.)