Search

Ciavola, P., Contestabile, P., Aristodemo, F., and Vicinanza, D., 2013. Beach sediment mixing under drained and undrained conditions. The paper describes a set of experiments undertaken at the Grosser Wellen Kanal (GWK) in Hannover on sediment mixing on a beachface exposed to the action of a buried drainage system. Experiments were performed using a set of drains (up to three working simultaneously), located at variable distance from the shoreline. Wave energy during the tests ranged from medium (0.59 m < Hs < 0.61 m) to high (0.76 m < Hs < 0.83 m). Beach profiles were measured at the end of each test. Further validation came from measurements using a grid of rods that were monitored at the same time as the beach profiles were surveyed. While some beach stabilization was observed for low energy conditions, for medium and high energy conditions the benefit of having the drains operative was not so clear. The comparison between beach profiler and rods showed good agreement regarding relative vertical accretion and erosion events. In any case, it was evident that the sedimentary effect on the beachface was confined to a narrow area above the drains. The drained area showed slightly lower values of sediment mixing under drained conditions, but evidently this factor was not important enough to trigger a widespread beach stabilization. Values of sediment mixing averaged across the whole beachface ranged between 2-4 % and 4-6 % of the breaking wave height respectively for high and medium energy wave conditions. Grain size, beach slope and drain configurations used here are fully comparable to field installations present in the literature. [ABSTRACT FROM AUTHOR]

Vicinanza, D., Nørgaard, J.H., Contestabile, P. and Andersen, T.L., 2013. Wave loadings acting on Overtopping BReakwater for Energy Conversion. Any kind of Wave Energy Converter ( WEC) requires information on reliability of technology and on time required for the return of the investment (reasonable payback). The structural response is one of the most important parameters to take in to account for a consistent assessment on innovative devices. This paper presents results on wave loading acting on an hybrid WEC named Overtopping BReakwater for Energy Conversion ( OBREC). The new design is based on the concept of an integration between a traditional rubble mound breakwater and a front reservoir designed to store the wave overtopping from the incoming wave to produce electricity. 2D hydraulic model tests were carried out at the Department of Civil Engineering, Aalborg University (Denmark). The analyses of hydraulic model tests have identified the main shapes assumed by wave surfaces at the breakwater and respective spatial and temporal pressure distributions. Load measurements were compared with the most used prediction method for traditional breakwaters, available in the Coastal Engineering Manual (U.S. Army Corps of Engineers, 2002). These results suggest to use the experimental data as design loadings since the design criteria for the innovative OBREC are under development. [ABSTRACT FROM AUTHOR]