Search

Poly(vinyl acetate), PVAc, adhesives are commonly used for wood bonding; however, they are fossil-based and the final products usually do not have a sufficient water resistance for more durable applications. In this study we prepared an adhesive formulation by grafting VAc from chitosan using emulsion polymerization, chitosan-graft-PVAc. Thereby, we could decrease the fossil-based content of the adhesive and at the same time significantly improve the water resistance. Chitosan by itself has very good bonding properties as a wood adhesive, especially regarding water resistance; however, very low solid contents of the adhesive formulation can be achieved due to a very high viscosity of chitosan adhesives. In our chitosan-graft-PVAc adhesives, we explored two chitosan samples with different molecular weights, by using as-received chitosan and hydrolyzing it to a lower molecular weight. The chitosan fractions in the adhesives prepared with a higher molecular weight chitosan were 15, 20 and 25 wt%. However, due to the high viscosity, a solid content higher than 17 wt% could not be achieved for these adhesives. Sufficient bond strengths were achieved when the adhesive was applied in 122 g/m2 solid spread rate. In order to decrease the viscosity, we used hydrolyzed chitosan, with a lower molecular weight, to allow for a higher adhesive solid content, 34 wt%, and for a higher chitosan fraction, 40 wt%. In the adhesive with 40 wt% chitosan and 17 wt% solid content, all VAc was grafted from chitosan. This decreased the molecular mobility of the chains, leading to a lower susceptibility to plastic creep in the adhesive which contributes to the final bond strength. The dry and wet strengths of the specimens bonded with adhesives containing chitosan were higher than the strength of the specimens bonded with the reference PVAc adhesive., QC 20240926

The colloidal layer formation on porous materials is a crucial step for printing and applying functional coatings, which can be used to fabricate anticounterfeiting paper. The deposition of colloidal layers and subsequent thermal treatment allows for modifying the hydrophilicity of the surface of a material. In the present work, wood-based colloidal inks are applied by spray deposition on spray-deposited porous cellulose nanofibrils (CNF) films. The surface modification by thermal annealing of the fabricated colloid-cellulose hybrid thin films is investigated in terms of layering and hydrophobicity. The polymer colloids in the inks are core-shell nanoparticles with different sizes and glass transition temperatures (T-g), thus enabling different and low thermal treatment temperatures. The ratio between the core polymers, poly(sobrerol methacrylate) (PSobMA), and poly(-butyl methacrylate) (PBMA) determines the T-g and hence allows for tailoring of the T-g. The layer formation of the colloidal inks on the porous CNF layer depends on the imbibition properties of the CNF layer which is determined by their morphology. The water adhesion of the CNF layer decreases due to the deposition of the colloids and thermal treatment except for the colloids with a size smaller than the void size of the porous CNF film. In this case, the colloids are imbibed into the CNF layer when T-g of the colloids is reached and the polymer chains transit in a mobile phase. Tailored aggregate and nanoscale-embedded hybrid structures are achieved depending on the colloid properties. The imbibition of these colloids into the porous CNF films is verified with grazing incidence small-angle X-ray scattering. This study shows a route for tuning the nanoscale structure and macroscopic physicochemical properties useful for anticounterfeiting paper., QC 20240604

Self-catalyzed hydrolysis upon storage of the common RAFT chain-transfer agent (CTA) 4-cyano-4-[(thiothiopropyl)sulfanyl] pentanoic acid (CTPPA) is confirmed, where the nitrile group is transformed into an amide by catalysis from the adjacent carboxylic acid moiety. The amide-CTA (APP) is found to poorly control molecular weight evolution during polymerization of two methacrylates, methyl methacrylate (MMA) and N,N-(dimethylamino)ethyl methacrylate (DMAEMA), likely due to poor reinitiation speed in the pre-equilibrium. However, when attached to a macromolecule, the impact of this amide moiety becomes insignificant and chain extension proceeds as expected with CTPPA. In light of CTPPA and similarly hydrolyzable CTAs being extensively employed for aqueous polymerizations of methacrylates, these findings highlight the importance of CTA purity when performing RAFT polymerizations., QC 20240604

QC 20230426

Correlating nanostructure and optical properties of thin hybrid films is the crucial ingredient for designing sustainable applications ranging from structural colors in anticounterfeiting to sensors. Here, the tailoring of the refractive index of hybrid cellulose nanofibril/water-dispersed colloidal ink thin films is presented. The authors apply scalable, layer-by-layer slot-die coating for preparing the cellulose nanofibril and hybrid thin films. Making use of the mobility of the polymer chains in the colloids upon annealing, the influence of the different colloid sizes and their glass transition temperature on the refractive index of the hybrid material is shown. The complex refractive indices of the thin films are characterized by spectroscopic ellipsometry and correlated to the different nanostructures of the thin films. The authors find that post-deposition annealing changes the colloidal nanostructure from particulate to agglomerates. Depending on the size of the colloids, imbibition of the colloids into the cellulose nanofibril template is observed. This scalable approach offers new avenues in structural color functional biomaterial hybrid layers., QC 20230725

Ultrasonication was used as a mean toincorporate glycerolor urea, yielding paper films with a ductility of up to 35%. Fiber-based materials are attractive sustainable alternativestofossil-based plastics, however, the lack of ductility (i.e., brittleness)limits their applicability in complex shapes as are often utilizedfor plastics. In this study, we hypothesize that it is possible toenhance the ductility of a cellulose-rich material by the incorporationof low molecular weight plasticizers (glycerol, urea, citric acid,and tannic acid). However, no significant effects could be observedafter swelling in the presence of plasticizers. To enhance any potentialeffect, it was decided to employ ultrasonication to mechanically disintegratethe fiber and aid the sorption of plasticizer prior to formation ofsheets from the treated fibers. Glycerol or urea in combination withultrasonication resulted in both internal and external fibrillationof the fibers, and it could be observed that the resulting fines createa film at the surface of the fibers in the formed sheets. Tensiletesting shows that this gives rise to a 100% increase in ductilitycompared to sheets from untreated fibers. The use of citric or tannicacid has the opposite effect, reducing ductility to a third of thatof the reference sheet. This is suggested to be due to the formationof covalent cross-links in the treated fibers, which also leads todifferent internal and external fibrillation mechanisms, as observedby scanning electron microscopy. The exceptionally high improvementof the strain-at-break for sheets from the glycerol- and urea-treatedfibers suggests that low molecular weight plasticizers affect theinternal properties of the fiber wall as well as the interactionsbetween the fine material forming in-between the fibers. The findingsfrom the current study suggest that the proposed approach to obtainductile cellulose-rich materials holds promise for the future, butit is also clear that more in-depth research is req, QC 20230630

The combination of reversible addition-fragmentation chain-transfer (RAFT) polymerization with polymerization-induced self-assembly (PISA) is known to yield monodisperse nanolatexes. Interestingly, based on the results of the current study, reproducible bimodal nanolatexes were shown to be the result of chain extension of protonated poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) with methyl methacrylate (MMA) in water when aiming for a longer hydrophobic block, for which we provide the first imaging data to our knowledge. The bimodality was found to be induced by the hydrophilic Z-group of the RAFT agent, which has been reported in the literature to be the cause of bimodal molecular weight distributions in RAFT-mediated PISA in emulsion polymerization. Moreover, the advantages of such reproducible bimodal size distribution nanolatexes in coating applications were investigated briefly, underlining the possibilities of their one-pot synthesis. It was found that when bimodal nanolatexes are adsorbed onto cellulose filter paper, the contact angle against water is higher compared to chemically similar monomodal nanolatexes. Also, the morphological arrangement was found to be dependent on the drying protocol. This study aims to expand our understanding on bimodality and the identification of parameters that could promote it on demand to target high-end applications., QC 20230704

To address the increasing demand for biobased materials, lignin-derived ferulic acid (FA) is a promising candidate. In this study, an FA-derived styrene-like monomer, referred to as 2-methoxy-4-vinylphenol (MVP), was used as the platform to prepare functional monomers for radical polymerizations. Hydrophobic biobased monomers derived from MVP were polymerized via solution and emulsion polymerization resulting in homo- and copolymers with a wide range of thermal properties, thus showcasing their potential in thermoplastic applications. Moreover, divinylbenzene (DVB)-like monomers were prepared from MVP by varying the aliphatic chain length between the MVP units. These biobased monomers were thermally crosslinked with thiol-bearing reagents to produce thermosets with different crosslinking densities in order to demonstrate their thermosetting applications. The results of this study expand the scope of MVP-derived monomers that can be used in free-radical polymerizations toward the preparation of new biobased and functional materials from lignin., QC 20230607

In light of the need to redesign industrially produced materials by utilizing renewable resources, nanoscopic forms of cellulose are regarded as a valuable asset. In this work, the potential of cellulose nanofibrils (CNFs) as an unconventional nanoadditive for a polyester-melamine coil coating formulation is explored. CNFs, hydrophilic nanomaterials with high aspect ratios, were successfully incorporated in the solvent-borne formulation. Coatings were prepared with extremely low loadings of the nanoadditive (0.5 and 0.7 wt%). At these concentrations, the volume fraction of the nanofibrils in the coatings was calculated to be close to their percolation threshold. Two different pathways of CNF surface modification were applied to allow for a good compatibilization in the resin matrix, and the formulations were cured in two different settings. The effective compatibilization of the nano -additive led to a significant variation of the viscoelastic properties in the coatings containing CNFs. The results from dynamic mechanical analysis (DMA) highlighted the effect of CNFs on the crosslinked network at the nanoscale, resulting in an increase in Tg. Additionally, an increase in the stress at break and Young's modulus was determined by tensile testing, while satisfactory elongation at break was preserved. Other relevant effects induced by the presence of CNFs on the properties of the coatings were highlighted, such as a significant matt effect, increased surface roughness and lower scratch resistance. A preliminary evaluation of the water barrier properties by electrochemical impedance spectroscopy (EIS) is also presented, suggesting that the incorporation of a hydrophilic nanoadditive did not lead to a deterioration of the coatings' performance., QC 20230607

Poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) is currently used for a wide range of applications, often involving the synthesis of block copolymers. Here, an in-depth characterization of PDMAEMA prepared by atom transfer radical polymerization (ATRP) is reported, with a focus on end group analysis. The structure of the polymer was elucidated by one- and two-dimensional NMR spectroscopy, which assessed the presence of deactivated chains and allowed for a quantification of their fraction. Detailed characterization by MALDI-TOF MS further provided insightful information about the chain end fidelity. On this basis, termination by disproportionation was found to be the main mechanism for the loss of active chain ends. The detailed characterization allowed for an estimation of the preserved chain end functionality (CEF) of PDMAEMA. Additionally, a chain extension experiment was conducted, using PDMAEMA as a macroinitiator for the polymerization of methyl methacrylate (MMA) by ATRP. The results of chain extension supported the estimation of CEF based on the data provided by NMR and MS. Although assessing the degree of polymerization of a block copolymer proves challenging when the amount of the initial block able to act as a macroinitiator is not known a priori, an accurate estimation of the DP and M-n of the obtained block copolymer was possible by total nitrogen analysis. The tools here provided for the characterization of PDMAEMA and its block copolymer architectures allow the obtainment of essential information about the extent of control over the homo- and copolymerization. Therefore, they are of high importance when well-defined structures are aimed for., QC 20230327

Correlating nanostructure and optical properties of thin hybrid films is the crucial ingredient for designing sustainable applications ranging from structural colors in anticounterfeiting to sensors. Here, the tailoring of the refractive index of hybrid cellulose nanofibril/water-dispersed colloidal ink thin films is presented. The authors apply scalable, layer-by-layer slot-die coating for preparing the cellulose nanofibril and hybrid thin films. Making use of the mobility of the polymer chains in the colloids upon annealing, the influence of the different colloid sizes and their glass transition temperature on the refractive index of the hybrid material is shown. The complex refractive indices of the thin films are characterized by spectroscopic ellipsometry and correlated to the different nanostructures of the thin films. The authors find that post-deposition annealing changes the colloidal nanostructure from particulate to agglomerates. Depending on the size of the colloids, imbibition of the colloids into the cellulose nanofibril template is observed. This scalable approach offers new avenues in structural color functional biomaterial hybrid layers., QC 20231030

Correlating nanostructure and optical properties of thin hybrid films is the crucial ingredient for designing sustainable applications ranging from structural colors in anticounterfeiting to sensors. Here, the tailoring of the refractive index of hybrid cellulose nanofibril/water-dispersed colloidal ink thin films is presented. The authors apply scalable, layer-by-layer slot-die coating for preparing the cellulose nanofibril and hybrid thin films. Making use of the mobility of the polymer chains in the colloids upon annealing, the influence of the different colloid sizes and their glass transition temperature on the refractive index of the hybrid material is shown. The complex refractive indices of the thin films are characterized by spectroscopic ellipsometry and correlated to the different nanostructures of the thin films. The authors find that post-deposition annealing changes the colloidal nanostructure from particulate to agglomerates. Depending on the size of the colloids, imbibition of the colloids into the cellulose nanofibril template is observed. This scalable approach offers new avenues in structural color functional biomaterial hybrid layers., QC 20231030

Cellulose nanofibril (CNF)-networks are modified by the addition of small amounts (below 10 wt%) of well-defined cationic nanolatexes synthesized through reversible addition–fragmentation chain-transfer-mediated polymerization-induced self-assembly (PISA). Minute amounts of nanolatex inclusions lead to increased tensile and shear moduli, indicating that nanolatexes can act as bridging-points between CNFs. At higher nanolatex content, this stiffening effect is lost, likely due to interactions between nanolatexes leading to plasticization. The influence of nanolatex content and size on interparticle distance is discussed and is used as a tool to understand the effects observed in macroscopic properties. Upon annealing, the stiffening effect is lost due to the softening of the nanolatexes, indicating that the core–shell morphology is a prerequisite for this effect. These systems form a versatile platform to develop fundamental insights into complex condensed colloidal systems, to ultimately aid in the development of new sustainable material concepts., QC 20230228

Understanding and tuning nanoscale structure is critical in developing new coatings and adhesives. In this work layer-by-layer assembly of block co-polymer (BCP) micelles and oppositely charged polyelectrolytes produces structurally unique coatings with wet adhesion comparable to that of mussel adhesive proteins. Cationic (CAT) and anionic (ANI) BCPs, synthesized by atom transfer radical polymerization (ATRP), are used to create colloidally stable, self-assembled, spherical BCP micelles. The assembly of BCP micelle and polyelectrolyte multilayers is monitored in situ where CAT- and ANI-BCP micelles exhibit linear and super-linear growth, respectively. Imaging of the surfaces reveals that CAT-BCP micelles yield flat, uniform layers whereas ANI-BCP micelle assemblies form islands that increase in surface area with each additional layer. The adhesion of these layers, measured by colloidal probe atomic force microscopy (CP-AFM), shows that the distinct layers of CAT-BCP micelle assemblies produce alternating high and low adhesion surfaces whereas ANI-BCP micelle assemblies continually increase in adhesion with each additional bilayer. The unique behavior of each assembly demonstrates that both composition and structure play important roles in wet adhesion of submicron layers and that each can be tuned to target performance for different applications., QC 20221125

Today, the most commonly used adhesives in the wood industry are fossil-based, but the search for new, renewable and less hazardous, resources for adhesives is intensifying. Hemicelluloses show promising bonding performance when used as a component in wood adhesives. Since batch-to-batch variations can affect the use of hemicelluloses in a large-scale production, we have investigated the effect of hemicellulose molecular weight on important adhesive properties, such as viscosity and bond strength, by using locust bean gum as a hemicellulose model and varying the molecular weight through hydrolysis. Results showed that there is a nonlinear proportionality between bond strength and molecular weight. In the molecular weight range used in the study, 70–1460 kDa, anoptimum in the adhesive performance was achieved with intermediate molecular weights, 320 and 530 kDa, especially when considering applicability and bond strength. Adhesives with lower molecular weights, 70 and 150 kDa, did not exhibit sufficient cohesive strength; therefore, the bond strength was lower. The adhesive with higher molecular weight, 1460 kDa, was difficult to apply, especially since its maximum solid content was very low, 5 wt %., QC 20230403

Y Ferulic acid (FA) is an unsaturated hydroxycinnamic acid that can be isolated from lignin. In this study, the biorenewable FA was allylated to result in a library of monoor diallylated monomers, either having the inherent cinnamoyl double bond intact or saturated through hydrogenolysis. All monomers were photo-chemically cured with trimethylolpropane tris(3-mercaptopropionate) (TRIS) into crosslinked films in the presence of a photo initiator (Irgacue 819). The reactivity of the FA-derived monomers toward TRIS was investigated in detail by photorheology and FT-IR spectroscopy to reveal details on the relative reaction rates for the different alkene groups. The thermo-mechanical properties of the crosslinked films were fully characterized by means of dynamic mechanical analysis (DMTA) and thermal calorimetry (DSC). It was demonstrated that the glass transition temperature of the final crosslinked network could be controlled by the addition of a monoallylated monomer. By increasing the content of the monoallylated compound, it was possible to observe a linear decrease of the Tgvalues of the crosslinked films., QC 20210112

Foams made from cellulose nanomaterials are highly porous and possess excellent mechanical and thermal insulation properties. However, the moisture uptake and hygroscopic properties of these materials need to be better understood for their use in biomedical and bioelectronics applications, in humidity sensing and thermal insulation. In this work, we present a combination of hybrid Grand Canonical Monte Carlo and Molecular Dynamics simulations and experimental measurements to investigate the moisture uptake within nanocellulose foams. To explore the effect of surface modification on moisture uptake we used two types of celluloses, namely TEMPO-oxidized cellulose nanofibrils and carboxymethylated cellulose nanofibrils. We find that the moisture uptake in both the cellulose nanomaterials increases with increasing relative humidity (RH) and decreases with increasing temperature, which is explained using the basic thermodynamic principles. The measured and calculated moisture uptake in amorphous cellulose (for a given RH or temperature) is higher as compared to crystalline cellulose with TEMPO- and CM-modified surfaces. The high water uptake of amorphous cellulose films is related to the formation of water-filled pores with increasing RH. The microscopic insight of water uptake in nanocellulose provided in this study can assist the design and fabrication of high-performance cellulose materials with improved properties for thermal insulation in humid climates or packaging of water sensitive goods. Graphic abstract: [Figure not available: see fulltext.], QC 20220426

Today, most wood adhesives are prepared from fossil-based polymers and contain hazardous components,e.g., formaldehyde. With the growing environmental concern there is an urge to develop bio-based and harmless substitutes. In this study, the ambition is to explore and valorise hemicelluloses, a biproduct from pulping, as the main component in wood adhesives. Wood adhesives were prepared from different sources: xylan from beech wood, hemicellulose-rich liquids obtained from hydrolysis of hardwood, and ultrafiltered softwood hemicellulose recovered from the process water of a thermomechanical pulp mill. Hemicelluloses themselves do not exhibit sufficient bonding performance, but excellent bond strength and water resistance were obtained in combination with poly(vinyl amine). It was also demonstrated that chitosan can be used as a bio-based amino-functional alternative to synthetic poly(vinyl amine), with similar or superior properties. Hemicelluloses alone show insufficient water resistance, but hemicelluloses in combination with chitosan exhibit exceptionally good bonding performance, especially regarding water resistance. Adhesives prepared from liquids rich in hardwood- and softwood hemicelluloses showed similar bond strength in combination with amino-functional polymers (poly(vinyl amine) and chitosan), regardless of their differences in structure. The current study constitutes an example on how sidestreams from the pulp industry in combination with chitosan can be used to substitute fossil-based materials in the quest for a more sustainable society., QC 20220314

Generation of renewable polymers is a long-standing goal toward reaching a more sustainable society, but building blocks in biomass can be incompatible with desired polymerization type, hampering the full implementation potential of biomaterials. Herein, we show how conceptually simple oxidative transformations can be used to unlock the inherent reactivity of terpene synthons in generating polyesters by two different mechanisms starting from the same alpha-pinene substrate. In the first pathway, alpha-pinene was oxidized into the bicyclic verbanone-based lactone and subsequently polymerized into star-shaped polymers via ring-opening polymerization, resulting in a biobased semicrystalline polyester with tunable glass transition and melting temperatures. In a second pathway, polyesters were synthesized via polycondensation, utilizing the diol 1-(1'-chydroxyethyl)-3-(2'-hydroxyethyl)-2,2-dimethylcyclobutane (HHDC) synthesized by oxidative cleavage of the double bond of alpha-pinene, together with unsaturated biobased diesters such as dimethyl maleate (DMM) and dimethyl itaconate (DMI). The resulting families of terpenebased polyesters were thereafter successfully cross-Iinked by either transetherification, utilizing the terminal hydroxyl groups of the synthesized verbanone-based materials, or by UV irradiation, utilizing the unsaturation provided by the DMM or DMI moieties within the HHDC-based copolymers. This work highlights the potential to apply an oxidative toolbox to valorize inert terpene metabolites enabling generation of biosourced polyesters and coatings thereof by complementary mechanisms., QC 20220112

The potential for large-scale applications of cellulose nanofibrils (CNFs) is limited by the high water content of the starting material, which leads to high transportation costs and undesirable environmental impact. However, drying of CNFs results in loss of their nanoscopic dimensions leading to deterioration of their unique inherent mechanical properties. Herein, thorough redispersion studies of both fundamental and applied nature have been conducted in order to evaluate the effect of charge, redispersing agent, and drying method. Freeze-dried CNF dispersions were successfully redispersed by either increasing the charge density or adding redispersing agents. The greatest effect on redispersibility was achieved with fractionated LignoBoost lignin as redispersing agent, and this is attributed to steric repulsion during water removal and reduced CNF adhesion. Furthermore, the results unexpectedly show that redispersion is easier when the CNFs are dried in the form of nanopapers. By using this approach, excellent redispersibility was achieved even without a redispersing agent. Nanopapers formed from the redispersed CNFs was found to have essentially the same mechanical properties as those made from never-dried CNFs. Hence, this work suggests solutions for making CNFs viable for large-scale application while maintaining their nanoscale dimensions and their ability to create nanopapers with excellent mechanical properties., QC 20210915

Herein, we report the free-radical polymerization of the biobased alpha-methylene-gamma-butyrolactone and alpha-methylene-gamma-valerolactone, either into homopolymers or together with fossil-based (meth)acrylate monomers, methyl acrylate and methyl methacrylate in different ratios. The polymerization was thermally initiated by 2,2'-azobisisobutyronitrile or lauroyl peroxide to investigate their effect on the polymerization behaviors. Polymerizations were monitored by monomer conversion, and the final polymers were characterized with respect to molecular weight, composition, glass transition temperature, and thermal degradation. NMR showed significant differences in conversion rates of each monomer in the copolymerizations which suggest differences in reactivity ratios, sometimes to such an extent that the polymers exhibited a substantial compositional drift as corroborated by assessed thermal properties. Tailored T-g's and increased thermal stability were achieved by copolymerizing the lactones and the (meth)acrylates., QC 20210910

Bio-based monomers represent the future market for polymer chemistry, since the political economics of different states promote green ventures toward more sustainable materials and processes. Industrial pulp and paper processing represent a large market that could advance the use of by-products to avoid waste production and reduce pollution. Lignin represents the most available side product that can be used to produce a bio-based monomer. This review is concentrated on the possibility of using bio-based monomer derivates from pulp and the paper industry for UV-curing processing. UV-curing represents the new frontier for thermoset production, allowing a fast reaction cure, less energy demand, and the elimination of solvent. The growing demand for new monomers increases research in the environmental field to substitute for petroleum-based products. This review provides an overview of the main monomers and relative families of compounds derived from industrial processes that are suitable for UV-curing. Particular focus is given to the developments reached in the last few years concerning lignin, rosin and terpenes and the related possible applications of these in UV-curing chemistry., QC 20220302

The polymerization of a bio-based terpene-derived monomer, sobrerol methacrylate (SobMA), was evaluated in the design of polymeric nanoparticles (nanolatexes). Their synthesis was accomplished by using emulsion polymerization, either by free-radical polymerization in the presence of a cationic surfactant or a cationic macroRAFT agent by employing RAFT-mediated polymerization-induced self-assembly (PISA). By tuning the length of the hydrophobic polymer, it was possible to control the nanoparticle size between 70 and 110 nm. The average size of the latexes in both wet and dry state were investigated by microscopy imaging and dynamic light scattering (DLS). Additionally, SobMA was successfully copolymerized with butyl methacrylate (BMA) targeting soft-core nanolatexes. The comparison of the kinetic profile of the cationically stabilized nanolatexes highlighted the differences of both processes. The SobMA-based nanolatexes yielded high T-g similar to 120 degrees C, while the copolymer sample exhibited a lower T-g similar to 50 degrees C, as assessed by Differential Scanning Calorimetry (DSC). Thereafter, the nanolatexes were adsorbed onto cellulose (filter paper), where they were annealed at elevated temperatures to result in polymeric coatings. Their morphologies were analysed by Field Emission Scanning Electron Microscopy (FE-SEM) and compared to a commercial sulfate polystyrene latex (PS latex). By microscopic investigation the film formation mechanism could be unravelled. Water contact angle (CA) measurements verified the transition from a hydrophilic to a hydrophobic surface after film formation had occured. The obtained results are promising for the toolbox of bio-based building blocks, focused on sobrerol-based monomers, to be used in emulsion polymerizations either for tailored PISA-latexes or facile conventional latex formation, in order to replace methyl methacrylate or other high T-g-monomers., QC 20210409

The combination of cellulose nanocrystals (CNCs ) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) was evaluated to synthesize stable latexes by surfactant-free emulsion polymerization of methyl methacrylate (MMA). Cellulose-particle interaction was provided due to the dual role of PEGMA, acting as water-soluble comonomer with MMA under emulsion polymerization conditions and able to interact with CNCs, recovered from sulfuric acid hydrolysis (H2SO4-CNCs). After preliminary experiments designed to validate the affini ty between CNCs and PEG-stabilized PMMA particles obtained by MMA/PEGMA emulsion copolymerization, the effect of the PEGMA content and molar mass and also of the content of CNCs on the kinetics of the polymerization and the stability of the latexes were investigated. The use of PEGMA 300 (M-n = 300 g mol(-1),2-10 wt %) allowed the formation of a stable latex, however, with a broad particle size distribution and the presence of both small (ca. 25-50 nm) and large (ca. 425-650 nm) particles (at 10 wt %, D-n = 278 nm and D-w/D-n = 1.34). Increasing the molar mass of PEGMA (PEGMA(950) or PEGMA(2080)) significantly increased the fraction of small partides. This was explained by the nucleation and growth of small polymer particles adsorbed at the CNCs' surface, resulting in a particular organization where the CNCs were covered by several polymer particles. The influence of the initial amount of CNCs in these systems was finally evidenced, the polymerization being faster as the content of CNCs increased, but only the latexes prepared with 2 and 5 wt % of CNCs were stable., QC 20210127

QCR 20200205

Latex colloids are among the most promising materials for broad thin film applications due to their facile surface functionalization. Yet, the effect of these colloids on chemical film and wetting properties cannot be easily evaluated. At the nanoscale, core–shell particles can deform and coalesce during thermal annealing, yielding fine-tuned physical properties. Two different core–shell systems (soft and rigid) with identical shells but with chemically different core polymers and core sizes are investigated. The core–shell nanoparticles (NPs) are probed during thermal annealing in order to investigate their behavior as a function of nanostructure size and rigidity. X-ray scattering allows to follow the re-arrangement of the NPs and the structural evolution in situ during annealing. Evaluation by real-space imaging techniques reveals a disappearance of the structural integrity and a loss of NP boundaries. The possibility to fine-tune the wettability by tuning the core–shell NPs morphology in thin films provides a facile template methodology for repellent surfaces., QC 20200630

This study aims to describe and evaluate the mechanism for increased strain-at-break of composites made of cellulose nanofibrils (CNFs) reinforced with nanoscopic latex particles (<200 nm) stabilized by a cationic polyelectrolyte as corona. The applied latex nanoparticles (NPs), synthesized by polymerization-induced self-assembly (PISA), are composed of a neutral core polymer, either poly(butyl methacrylate) (PBMA) or poly(methyl methacrylate) (PMMA). At room temperature, PBMA is close to its glass transition (T-g), while PMMA is below its Tg. Nanocomposites with 75 wt% CNFs and 25 wt% NPs were analyzed using in situ small angle X-ray scattering during tensile testing, monitoring the structural evolution of the NPs under strain. The scattering of the spherical PMMA NPs, which do not coalesce like the PBMA NPs, shows changes to the organization of the NPs in the CNF-network. The observations are corroborated by cross-sectional transmission and scanning electron microscopy. No distinct change from spherical to ellipsoidal shape is evidenced for the PMMA NP cores during tensile strain. Changes in anisotropic scattering produced by the three-dimensional NP structure appear to be very different between nanocomposites loaded with PMMA or PBMA NPs, contrasting commonly described two-dimensional CNF networks. The discrete PMMA NPs can reorganize within the CNF-NP double network under strain, resulting in maintained strength and increased strain-at-break. Increasing the humidity (20, 50 and 80% RH) during in situ measurements further emphasizes this effect in the PMMA composite, relative to the PBMA composite and CNF reference films. The onset of deformation occurs at strain values beyond the fracture of the more brittle films, indicating the effect of secondary nanoscale interaction available only for the PMMA composite, extending the plastic deformation and increasing the ductility. These results provide key insights into the deformation mechanism occurring during tensi, QC 20200623

QCR 20200205

QCR 20200205

This study highlights the beneficial role of cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) as components in functional membranes. The approaches of the use of CNF and CNC as membrane materials Ibr water purification have been studied extensively during the past decades. This is due to their inherent abundance, renewability, sustainability and unique properties such as high aspect ratio, high surface area, high crystallinity, and high mechanical properties. The performance of CNF- and CNC-based membranes especially in treating actual water samples were also highlighted in this review to give a better overview of the behavior of these nanocellulose as membrane materials. The challenges of using CNFs and CNCs and the needfor improvements for the future development of membrane materials are also discussed., QC 20210211

QC 20240213

QC 20240213

QC 20190918

QC 20190919

QC 20190919

QC 20190904

QC 20190919

QC 20200528

Significantly increased production of biobased polymers is aprerequisite to replace petroleum-based materials towardsreaching a circular bioeconomy. However, many renewablebuilding blocks from wood and other plant material are notdirectly amenable for polymerization, due to their inert backbonesand/or lack of functional group compatibility with thedesired polymerization type. Based on a retro-biosyntheticanalysis of polyesters, a chemoenzymatic route from (@)-apinenetowards a verbanone-based lactone, which is furtherused in ring-opening polymerization, is presented. Generatedpinene-derived polyesters showed elevated degradation andglass transition temperatures, compared with poly(e-decalactone),which lacks a ring structure in its backbone. Semirationalenzyme engineering of the cyclohexanone monooxygenasefrom Acinetobacter calcoaceticus enabled the biosynthesis ofthe key lactone intermediate for the targeted polyester. As aproof of principle, one enzyme variant identified from screeningin a microtiter plate was used in biocatalytic upscaling,which afforded the bicyclic lactone in 39% conversion in shakeflask scale reactions., QC 20191008

Cationic latexes with Tgs ranging between −40 °C and 120 °C were synthesised using n-butyl acrylate (BA) and/or methyl methacrylate (MMA) as the core polymers. Reversible addition–fragmentation chain transfer (RAFT) combined with polymerisation-induced self-assembly (PISA) allowed for in situ chain-extension of a cationic macromolecular RAFT agent (macroRAFT) of poly(N-[3-(dimethylamino)propyl] methacrylamide) (PDMAPMA), used as stabiliser in so-called surfactant-free emulsion polymerisation. The resulting narrowly distributed nanosized latexes adsorbed readily onto silica surfaces and to model surfaces of cellulose nanofibrils, as demonstrated by quartz crystal microbalance with dissipation monitoring (QCM-D) measurements. Adsorption to anionic surfaces increased when increasing ionic strength to 10 mM, indicating the influence of the polyelectrolyte effect exerted by the corona. The polyelectrolyte corona affected the interactions in the wet state, the stability of the latex and re-dispersibility after drying. The QCM-D measurements showed that a lower Tg of the core results in a more strongly interacting adsorbed layer at the solid–liquid interface, despite a comparable adsorbed mass, indicating structural differences of the investigated latexes in the wet state. The two latexes with Tg below room temperature (i.e. PBATg-40 and P(BA-co-MMA)Tg3) exhibited film formation in the wet state, as shown by AFM colloidal probe measurements. It was observed that P(BA-co-MMA)Tg3 latex resulted in the largest pull-off force, above 200 m Nm−1 after 120 s in contact. The strongest wet adhesion was achieved with PDMAPMA-stabilized latexes soft enough to allow for interparticle diffusion of polymer chains, and stiff enough to create a strong adhesive joint. Fundamental understanding of interfacial properties of latexes and cellulose enables controlled and predictive strategies to produce strong and tough materials with high nanocellulose content, both in the wet and dry state., QC 20190123

A molecularly engineered water-borne reactive compatibilizer is designed for tuning of the interface in melt-processed thermoplastic poly(caprolactone) (PCL)-cellulose nanocomposites. The mechanical properties of the nanocomposites are studied by tensile testing and dynamic mechanical analysis. The reactive compatibilizer is a statistical copolymer of 2-(dimethylamino)ethyl methacrylate and 2-hydroxy methacrylate, which is subsequently esterified and quaternized. Quaternized ammonium groups in the reactive compatibilizer electrostatically match the negative surface charge of cellulose nanofibrils (CNFs). This results in core-shell CNFs with a thin uniform coating of the compatibilizer. This promotes the dispersion of CNFs in the PCL matrix, as concluded from high-resolution scanning electron microscopy and atomic force microscopy. Moreover, the compatibilizer "shell" has methacrylate functionalities, which allow for radical reactions during processing and links covalently with PCL. Compared to the bio-nanocomposite reference, the reactive compatibilizer (<4 wt %) increased Young's modulus by about 80% and work to fracture 10 times. Doubling the amount of peroxide caused further improved mechanical properties, in support of effects from higher cross-link density at the interface. Further studies of interfacial design in specific nanocellulose-based composite materials are warranted since the detrimental effects from CNFs agglomeration may have been underestimated., QC 20190820

An all-water-based procedure for "controlled" polymer grafting from cellulose nanofibrils is reported. Polymers and copolymers of poly(ethylene glycol) methyl ether methacrylate (POEGMA) and poly(methyl methacrylate) (PMMA) were synthesized by surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP) from the cellulose nanofibril (CNF) surface in water. A macroinitiator was electrostatically immobilized to the CNF surface, and its amphiphilic nature enabled polymerizations of both hydrophobic and hydrophilic monomers in water. The electrostatic interactions between the macroinitiator and the CNF surface were studied by quartz crystal microbalance with dissipation energy (QCM-D) and showed the formation of a rigid adsorbed layer, which did not desorb upon washing, corroborating the anticipated electrostatic interactions. Polymerizations were conducted from dispersed modified CNFs as well as from preformed modified CNF aerogels soaked in water. The polymerizations yielded matrix-free composite materials with a CNF content of approximately 1-2 and 3-6 wt % for dispersion-initiated and aerogel-initiated CNFs, respectively., QC 20190603

QC 20190218

QC 20190218

Sobrerol methacrylate (SobMA) was synthesized and subsequently polymerized using different chemical and enzymatic routes. Sobrerol was enzymatically converted from -pinene in a small model scale by a Cytochrome P450 mutant from Bacillus megaterium. Conversion of sobrerol into SobMA was performed using both classical ester synthesis, i.e., acid chloride-reactions in organic solvents, and a more green approach, the benign lipase catalysis. Sobrerol was successfully esterified, leaving the tertiary alcohol and ene to be used for further chemistry. SobMA was polymerized into PSobMA using different radical polymerization techniques, including free radical (FR), controlled procedures (Reversible Addition Fragmentation chain-Transfer polymerization, (RAFT) and Atom Transfer Radical Polymerization (ATRP)) as well as by enzyme catalysis (horseradish peroxidase-mediated free radical polymerization). The resulting polymers showed high glass-transition temperatures (T-g) around 150 degrees C, and a thermal degradation onset above 200 degrees C. It was demonstrated that the T-g could be tailored by copolymerizing SobMa with appropriate methacrylate monomers and that the Flory-Fox equation could be used to predict the T-g. The versatility of PSobMA was further demonstrated by forming crosslinked thin films, either using the ene'-functionality for photochemically initiated thiol-ene'-chemistry, or reacting the tertiary hydroxyl-group with hexamethoxymethylmelamine, as readily used for thermally curing coatings systems., QC 20190812

EDC-mediated coupling has frequently been utilized to poly(ethylene glycol) functionalize (PEGylate) cellulose-based materials, but no work has previously been reported on the direct N-(3-dimethylaminopropyl)-N-ethylcarbodiimide (EDC)-mediated PEGylation of cellulose nanofibrils (CNF). Herein, we report the first study where CNF has been directly sterically stabilized with amine-terminated PEG employing N-hydroxysuccinimide (NHS)-assisted EDC-coupling. This work has shown that this coupling reaction is highly sensitive to the reaction conditions and purification procedures, and hence an optimized coupling protocol was developed in order to achieve a reaction yield. Elemental analysis of the nitrogen content also showed the successful PEGylation. It was also shown that a surprisingly low PEGylation (1%) is sufficient to significantly improve the colloidal stability of the PEGylated samples, which reached dispersion-arrested-state-transitions at higher concentrations than neat CNF. The colloidal stability was preserved with increasing ionic strength, when comparably long polymer chains were grafted, targeting only 1% PEGylation., QC 20171220

QC 20190111

This work reports the development of a sustainable and green one-step wet-feeding method to prepare tougher and stronger nanocomposites from biodegradable cellulose nanofibrils (CNF)/polycaprolactone (PCL) constituents, compatibilized with reversible addition fragmentation chain transfer-mediated surfactant-free poly(methyl methacrylate) (PMMA) latex nanoparticles. When a PMMA latex is used, a favorable electrostatic interaction between CNF and the latex is obtained, which facilitates mixing of the constituents and hinders CNF agglomeration. The improved dispersion is manifested in significant improvement of mechanical properties compared with the reference material. The tensile tests show much higher modulus (620 MPa) and strength (23 MPa) at 10 wt % CNF content (compared to the neat PCL reference modulus of 240 and 16 MPa strength), while maintaining high level of work to fracture the matrix (7 times higher than the reference nanocomposite without the latex compatibilizer). Rheological analysis showed a strongly increased viscosity as the PMMA latex was added, that is, from a well-dispersed and strongly interacting CNF network in the PCL., QC 20190123

Herein, we present a route to obtain bi-functional cellulose nanofibrils (CNF) by a one-pot approach using an already established functionalisation route, carboxymethylation, to which a subsequent functionalisation step, allylation or alkynation, has been added in the same reaction pot, eliminating the need of solvent exchange procedures. The total charge of the fibres and the total surface charge of the nanofibrils were determined by conductometric and polyelectrolyte titration, respectively. Furthermore, the allyl and alkyne functionalised cellulose were reacted with methyl 3-mercaptopropionate and azide-functionalised disperse red, respectively, to estimate the degree of functionalisation. The samples were further assessed by XPS and FT-IR. Physical characteristics were evaluated by CP/MAS C-13-NMR, XRD, AFM and DLS. This new approach of obtaining bi-functionalised CNF allows for a facile and rapid functionalisation of CNF where chemical handles can easily be attached and used for further modification of the fibrils., QC 20190110

In the present work, cellulose nanocrystals (CNCs) have been surface-modified either via covalent grafting or through physisorption of poly(n-butyl methacrylate) (PBMA) and employed as reinforcement in PCL. Covalent grafting was achieved by surface-initiated atom transfer radical polymerization (SI-ATRP). Two approaches were utilized for the physisorption: using either micelles of poly(dimethyl aminoethyl methacrylate)-block-poly(n-butyl methacrylate) (PDMAEMA-b-PBMA) or latex nanoparticles of poly(dimethyl aminoethyl methacrylate-co-methacrylic acid)-block-poly(n-butyl methacrylate) (P(DMAEMA-co-MAA)-b-PBMA). Block copolymers (PDMAEMA-b-PBMA)s were obtained by ATRP and subsequently micellized. Latex nanoparticles were produced via reversible addition-fragmentation chain-transfer (RAFT) mediated surfactant-free emulsion polymerization, employing polymer-induced self-assembly (PISA) for the particle formation. For a reliable comparison, the amounts of micelles/latex particles adsorbed and the amount of polymer grafted onto the CNCs were kept similar. Two different chain lengths of PBMA were targeted, below and above the critical molecular weight for chain entanglement of PBMA (M-n,M-c similar to 56 000 g mo1(-1)). Poly(epsilon-caprolactone) (PCL) nanocomposites reinforced with unmodified and modified CNCs in different weight percentages (0.5, 1, and 3 wt %) were prepared via melt extrusion. The resulting composites were evaluated by UV-vis, scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and tensile testing. All materials resulted in higher transparency, greater thermal stability, and stronger mechanical properties than unfilled PCL and nanocomposites containing unmodified CNCs. The degradation temperature of PCL reinforced with grafted CNCs was higher than that of micelle-modified CNCs, and the latter was higher than that of latex-adsorbed CNCs with a long PBMA chain length. The results clearly indicate that covalent grafting is superior to p, QC 20171102