Search

Poly(vinyl acetate), PVAc, adhesives are commonly used for wood bonding; however, they are fossil-based and the final products usually do not have a sufficient water resistance for more durable applications. In this study we prepared an adhesive formulation by grafting VAc from chitosan using emulsion polymerization, chitosan-graft-PVAc. Thereby, we could decrease the fossil-based content of the adhesive and at the same time significantly improve the water resistance. Chitosan by itself has very good bonding properties as a wood adhesive, especially regarding water resistance; however, very low solid contents of the adhesive formulation can be achieved due to a very high viscosity of chitosan adhesives. In our chitosan-graft-PVAc adhesives, we explored two chitosan samples with different molecular weights, by using as-received chitosan and hydrolyzing it to a lower molecular weight. The chitosan fractions in the adhesives prepared with a higher molecular weight chitosan were 15, 20 and 25 wt%. However, due to the high viscosity, a solid content higher than 17 wt% could not be achieved for these adhesives. Sufficient bond strengths were achieved when the adhesive was applied in 122 g/m2 solid spread rate. In order to decrease the viscosity, we used hydrolyzed chitosan, with a lower molecular weight, to allow for a higher adhesive solid content, 34 wt%, and for a higher chitosan fraction, 40 wt%. In the adhesive with 40 wt% chitosan and 17 wt% solid content, all VAc was grafted from chitosan. This decreased the molecular mobility of the chains, leading to a lower susceptibility to plastic creep in the adhesive which contributes to the final bond strength. The dry and wet strengths of the specimens bonded with adhesives containing chitosan were higher than the strength of the specimens bonded with the reference PVAc adhesive., QC 20240926

The colloidal layer formation on porous materials is a crucial step for printing and applying functional coatings, which can be used to fabricate anticounterfeiting paper. The deposition of colloidal layers and subsequent thermal treatment allows for modifying the hydrophilicity of the surface of a material. In the present work, wood-based colloidal inks are applied by spray deposition on spray-deposited porous cellulose nanofibrils (CNF) films. The surface modification by thermal annealing of the fabricated colloid-cellulose hybrid thin films is investigated in terms of layering and hydrophobicity. The polymer colloids in the inks are core-shell nanoparticles with different sizes and glass transition temperatures (T-g), thus enabling different and low thermal treatment temperatures. The ratio between the core polymers, poly(sobrerol methacrylate) (PSobMA), and poly(-butyl methacrylate) (PBMA) determines the T-g and hence allows for tailoring of the T-g. The layer formation of the colloidal inks on the porous CNF layer depends on the imbibition properties of the CNF layer which is determined by their morphology. The water adhesion of the CNF layer decreases due to the deposition of the colloids and thermal treatment except for the colloids with a size smaller than the void size of the porous CNF film. In this case, the colloids are imbibed into the CNF layer when T-g of the colloids is reached and the polymer chains transit in a mobile phase. Tailored aggregate and nanoscale-embedded hybrid structures are achieved depending on the colloid properties. The imbibition of these colloids into the porous CNF films is verified with grazing incidence small-angle X-ray scattering. This study shows a route for tuning the nanoscale structure and macroscopic physicochemical properties useful for anticounterfeiting paper., QC 20240604

Self-catalyzed hydrolysis upon storage of the common RAFT chain-transfer agent (CTA) 4-cyano-4-[(thiothiopropyl)sulfanyl] pentanoic acid (CTPPA) is confirmed, where the nitrile group is transformed into an amide by catalysis from the adjacent carboxylic acid moiety. The amide-CTA (APP) is found to poorly control molecular weight evolution during polymerization of two methacrylates, methyl methacrylate (MMA) and N,N-(dimethylamino)ethyl methacrylate (DMAEMA), likely due to poor reinitiation speed in the pre-equilibrium. However, when attached to a macromolecule, the impact of this amide moiety becomes insignificant and chain extension proceeds as expected with CTPPA. In light of CTPPA and similarly hydrolyzable CTAs being extensively employed for aqueous polymerizations of methacrylates, these findings highlight the importance of CTA purity when performing RAFT polymerizations., QC 20240604

QC 20230426

Correlating nanostructure and optical properties of thin hybrid films is the crucial ingredient for designing sustainable applications ranging from structural colors in anticounterfeiting to sensors. Here, the tailoring of the refractive index of hybrid cellulose nanofibril/water-dispersed colloidal ink thin films is presented. The authors apply scalable, layer-by-layer slot-die coating for preparing the cellulose nanofibril and hybrid thin films. Making use of the mobility of the polymer chains in the colloids upon annealing, the influence of the different colloid sizes and their glass transition temperature on the refractive index of the hybrid material is shown. The complex refractive indices of the thin films are characterized by spectroscopic ellipsometry and correlated to the different nanostructures of the thin films. The authors find that post-deposition annealing changes the colloidal nanostructure from particulate to agglomerates. Depending on the size of the colloids, imbibition of the colloids into the cellulose nanofibril template is observed. This scalable approach offers new avenues in structural color functional biomaterial hybrid layers., QC 20230725

The combination of reversible addition-fragmentation chain-transfer (RAFT) polymerization with polymerization-induced self-assembly (PISA) is known to yield monodisperse nanolatexes. Interestingly, based on the results of the current study, reproducible bimodal nanolatexes were shown to be the result of chain extension of protonated poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) with methyl methacrylate (MMA) in water when aiming for a longer hydrophobic block, for which we provide the first imaging data to our knowledge. The bimodality was found to be induced by the hydrophilic Z-group of the RAFT agent, which has been reported in the literature to be the cause of bimodal molecular weight distributions in RAFT-mediated PISA in emulsion polymerization. Moreover, the advantages of such reproducible bimodal size distribution nanolatexes in coating applications were investigated briefly, underlining the possibilities of their one-pot synthesis. It was found that when bimodal nanolatexes are adsorbed onto cellulose filter paper, the contact angle against water is higher compared to chemically similar monomodal nanolatexes. Also, the morphological arrangement was found to be dependent on the drying protocol. This study aims to expand our understanding on bimodality and the identification of parameters that could promote it on demand to target high-end applications., QC 20230704

To address the increasing demand for biobased materials, lignin-derived ferulic acid (FA) is a promising candidate. In this study, an FA-derived styrene-like monomer, referred to as 2-methoxy-4-vinylphenol (MVP), was used as the platform to prepare functional monomers for radical polymerizations. Hydrophobic biobased monomers derived from MVP were polymerized via solution and emulsion polymerization resulting in homo- and copolymers with a wide range of thermal properties, thus showcasing their potential in thermoplastic applications. Moreover, divinylbenzene (DVB)-like monomers were prepared from MVP by varying the aliphatic chain length between the MVP units. These biobased monomers were thermally crosslinked with thiol-bearing reagents to produce thermosets with different crosslinking densities in order to demonstrate their thermosetting applications. The results of this study expand the scope of MVP-derived monomers that can be used in free-radical polymerizations toward the preparation of new biobased and functional materials from lignin., QC 20230607

In light of the need to redesign industrially produced materials by utilizing renewable resources, nanoscopic forms of cellulose are regarded as a valuable asset. In this work, the potential of cellulose nanofibrils (CNFs) as an unconventional nanoadditive for a polyester-melamine coil coating formulation is explored. CNFs, hydrophilic nanomaterials with high aspect ratios, were successfully incorporated in the solvent-borne formulation. Coatings were prepared with extremely low loadings of the nanoadditive (0.5 and 0.7 wt%). At these concentrations, the volume fraction of the nanofibrils in the coatings was calculated to be close to their percolation threshold. Two different pathways of CNF surface modification were applied to allow for a good compatibilization in the resin matrix, and the formulations were cured in two different settings. The effective compatibilization of the nano -additive led to a significant variation of the viscoelastic properties in the coatings containing CNFs. The results from dynamic mechanical analysis (DMA) highlighted the effect of CNFs on the crosslinked network at the nanoscale, resulting in an increase in Tg. Additionally, an increase in the stress at break and Young's modulus was determined by tensile testing, while satisfactory elongation at break was preserved. Other relevant effects induced by the presence of CNFs on the properties of the coatings were highlighted, such as a significant matt effect, increased surface roughness and lower scratch resistance. A preliminary evaluation of the water barrier properties by electrochemical impedance spectroscopy (EIS) is also presented, suggesting that the incorporation of a hydrophilic nanoadditive did not lead to a deterioration of the coatings' performance., QC 20230607

Poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) is currently used for a wide range of applications, often involving the synthesis of block copolymers. Here, an in-depth characterization of PDMAEMA prepared by atom transfer radical polymerization (ATRP) is reported, with a focus on end group analysis. The structure of the polymer was elucidated by one- and two-dimensional NMR spectroscopy, which assessed the presence of deactivated chains and allowed for a quantification of their fraction. Detailed characterization by MALDI-TOF MS further provided insightful information about the chain end fidelity. On this basis, termination by disproportionation was found to be the main mechanism for the loss of active chain ends. The detailed characterization allowed for an estimation of the preserved chain end functionality (CEF) of PDMAEMA. Additionally, a chain extension experiment was conducted, using PDMAEMA as a macroinitiator for the polymerization of methyl methacrylate (MMA) by ATRP. The results of chain extension supported the estimation of CEF based on the data provided by NMR and MS. Although assessing the degree of polymerization of a block copolymer proves challenging when the amount of the initial block able to act as a macroinitiator is not known a priori, an accurate estimation of the DP and M-n of the obtained block copolymer was possible by total nitrogen analysis. The tools here provided for the characterization of PDMAEMA and its block copolymer architectures allow the obtainment of essential information about the extent of control over the homo- and copolymerization. Therefore, they are of high importance when well-defined structures are aimed for., QC 20230327

Cellulose nanofibril (CNF)-networks are modified by the addition of small amounts (below 10 wt%) of well-defined cationic nanolatexes synthesized through reversible addition–fragmentation chain-transfer-mediated polymerization-induced self-assembly (PISA). Minute amounts of nanolatex inclusions lead to increased tensile and shear moduli, indicating that nanolatexes can act as bridging-points between CNFs. At higher nanolatex content, this stiffening effect is lost, likely due to interactions between nanolatexes leading to plasticization. The influence of nanolatex content and size on interparticle distance is discussed and is used as a tool to understand the effects observed in macroscopic properties. Upon annealing, the stiffening effect is lost due to the softening of the nanolatexes, indicating that the core–shell morphology is a prerequisite for this effect. These systems form a versatile platform to develop fundamental insights into complex condensed colloidal systems, to ultimately aid in the development of new sustainable material concepts., QC 20230228

Today, the most commonly used adhesives in the wood industry are fossil-based, but the search for new, renewable and less hazardous, resources for adhesives is intensifying. Hemicelluloses show promising bonding performance when used as a component in wood adhesives. Since batch-to-batch variations can affect the use of hemicelluloses in a large-scale production, we have investigated the effect of hemicellulose molecular weight on important adhesive properties, such as viscosity and bond strength, by using locust bean gum as a hemicellulose model and varying the molecular weight through hydrolysis. Results showed that there is a nonlinear proportionality between bond strength and molecular weight. In the molecular weight range used in the study, 70–1460 kDa, anoptimum in the adhesive performance was achieved with intermediate molecular weights, 320 and 530 kDa, especially when considering applicability and bond strength. Adhesives with lower molecular weights, 70 and 150 kDa, did not exhibit sufficient cohesive strength; therefore, the bond strength was lower. The adhesive with higher molecular weight, 1460 kDa, was difficult to apply, especially since its maximum solid content was very low, 5 wt %., QC 20230403

Foams made from cellulose nanomaterials are highly porous and possess excellent mechanical and thermal insulation properties. However, the moisture uptake and hygroscopic properties of these materials need to be better understood for their use in biomedical and bioelectronics applications, in humidity sensing and thermal insulation. In this work, we present a combination of hybrid Grand Canonical Monte Carlo and Molecular Dynamics simulations and experimental measurements to investigate the moisture uptake within nanocellulose foams. To explore the effect of surface modification on moisture uptake we used two types of celluloses, namely TEMPO-oxidized cellulose nanofibrils and carboxymethylated cellulose nanofibrils. We find that the moisture uptake in both the cellulose nanomaterials increases with increasing relative humidity (RH) and decreases with increasing temperature, which is explained using the basic thermodynamic principles. The measured and calculated moisture uptake in amorphous cellulose (for a given RH or temperature) is higher as compared to crystalline cellulose with TEMPO- and CM-modified surfaces. The high water uptake of amorphous cellulose films is related to the formation of water-filled pores with increasing RH. The microscopic insight of water uptake in nanocellulose provided in this study can assist the design and fabrication of high-performance cellulose materials with improved properties for thermal insulation in humid climates or packaging of water sensitive goods. Graphic abstract: [Figure not available: see fulltext.], QC 20220426

Today, most wood adhesives are prepared from fossil-based polymers and contain hazardous components,e.g., formaldehyde. With the growing environmental concern there is an urge to develop bio-based and harmless substitutes. In this study, the ambition is to explore and valorise hemicelluloses, a biproduct from pulping, as the main component in wood adhesives. Wood adhesives were prepared from different sources: xylan from beech wood, hemicellulose-rich liquids obtained from hydrolysis of hardwood, and ultrafiltered softwood hemicellulose recovered from the process water of a thermomechanical pulp mill. Hemicelluloses themselves do not exhibit sufficient bonding performance, but excellent bond strength and water resistance were obtained in combination with poly(vinyl amine). It was also demonstrated that chitosan can be used as a bio-based amino-functional alternative to synthetic poly(vinyl amine), with similar or superior properties. Hemicelluloses alone show insufficient water resistance, but hemicelluloses in combination with chitosan exhibit exceptionally good bonding performance, especially regarding water resistance. Adhesives prepared from liquids rich in hardwood- and softwood hemicelluloses showed similar bond strength in combination with amino-functional polymers (poly(vinyl amine) and chitosan), regardless of their differences in structure. The current study constitutes an example on how sidestreams from the pulp industry in combination with chitosan can be used to substitute fossil-based materials in the quest for a more sustainable society., QC 20220314

Generation of renewable polymers is a long-standing goal toward reaching a more sustainable society, but building blocks in biomass can be incompatible with desired polymerization type, hampering the full implementation potential of biomaterials. Herein, we show how conceptually simple oxidative transformations can be used to unlock the inherent reactivity of terpene synthons in generating polyesters by two different mechanisms starting from the same alpha-pinene substrate. In the first pathway, alpha-pinene was oxidized into the bicyclic verbanone-based lactone and subsequently polymerized into star-shaped polymers via ring-opening polymerization, resulting in a biobased semicrystalline polyester with tunable glass transition and melting temperatures. In a second pathway, polyesters were synthesized via polycondensation, utilizing the diol 1-(1'-chydroxyethyl)-3-(2'-hydroxyethyl)-2,2-dimethylcyclobutane (HHDC) synthesized by oxidative cleavage of the double bond of alpha-pinene, together with unsaturated biobased diesters such as dimethyl maleate (DMM) and dimethyl itaconate (DMI). The resulting families of terpenebased polyesters were thereafter successfully cross-Iinked by either transetherification, utilizing the terminal hydroxyl groups of the synthesized verbanone-based materials, or by UV irradiation, utilizing the unsaturation provided by the DMM or DMI moieties within the HHDC-based copolymers. This work highlights the potential to apply an oxidative toolbox to valorize inert terpene metabolites enabling generation of biosourced polyesters and coatings thereof by complementary mechanisms., QC 20220112

The polymerization of a bio-based terpene-derived monomer, sobrerol methacrylate (SobMA), was evaluated in the design of polymeric nanoparticles (nanolatexes). Their synthesis was accomplished by using emulsion polymerization, either by free-radical polymerization in the presence of a cationic surfactant or a cationic macroRAFT agent by employing RAFT-mediated polymerization-induced self-assembly (PISA). By tuning the length of the hydrophobic polymer, it was possible to control the nanoparticle size between 70 and 110 nm. The average size of the latexes in both wet and dry state were investigated by microscopy imaging and dynamic light scattering (DLS). Additionally, SobMA was successfully copolymerized with butyl methacrylate (BMA) targeting soft-core nanolatexes. The comparison of the kinetic profile of the cationically stabilized nanolatexes highlighted the differences of both processes. The SobMA-based nanolatexes yielded high T-g similar to 120 degrees C, while the copolymer sample exhibited a lower T-g similar to 50 degrees C, as assessed by Differential Scanning Calorimetry (DSC). Thereafter, the nanolatexes were adsorbed onto cellulose (filter paper), where they were annealed at elevated temperatures to result in polymeric coatings. Their morphologies were analysed by Field Emission Scanning Electron Microscopy (FE-SEM) and compared to a commercial sulfate polystyrene latex (PS latex). By microscopic investigation the film formation mechanism could be unravelled. Water contact angle (CA) measurements verified the transition from a hydrophilic to a hydrophobic surface after film formation had occured. The obtained results are promising for the toolbox of bio-based building blocks, focused on sobrerol-based monomers, to be used in emulsion polymerizations either for tailored PISA-latexes or facile conventional latex formation, in order to replace methyl methacrylate or other high T-g-monomers., QC 20210409

Electrostatic adsorption of cationic polyelectrolytes onto anionic cellulosic substrates is an attractive route for facile surface modification of biorenewable materials. Recently, attention has focused on adsorbing cationic spherical diblock copolymer nanoparticles onto model cellulose and/or nanocellulosic substrates. Herein, we investigate physical adsorption of highly anisotropic copolymer worms bearing either anionic or cationic charge onto planar silica, cellulose nanocrystal (CNC) or cellulose nanofibril (CNF) surfaces using quartz crystal microbalance with dissipation monitoring. Electrostatic interactions dominate in the case of anionic silica and CNC surfaces because the adsorbed mass of cationic worms was greater than that of anionic worms. However, either anionic or cationic worms could be adsorbed onto in situ generated CNF substrates, suggesting that additional interactions were involved: hydrogen bonding, van der Waals forces, and possibly covalent bond formation. Scanning electron and atomic force microscopy studies of the dried planar substrates after adsorption experiments confirmed the presence of adsorbed copolymer worms. Finally, composite worm/CNF films exhibited restricted swelling behavior when immersed in water compared to reference CNF films, suggesting that the worms reinforce CNF films by acting as a physical crosslinker. This study is the first investigation of the physical adsorption of highly anisotropic diblock copolymer worms onto cellulosic surfaces., QC 20220602

The combination of cellulose nanocrystals (CNCs ) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) was evaluated to synthesize stable latexes by surfactant-free emulsion polymerization of methyl methacrylate (MMA). Cellulose-particle interaction was provided due to the dual role of PEGMA, acting as water-soluble comonomer with MMA under emulsion polymerization conditions and able to interact with CNCs, recovered from sulfuric acid hydrolysis (H2SO4-CNCs). After preliminary experiments designed to validate the affini ty between CNCs and PEG-stabilized PMMA particles obtained by MMA/PEGMA emulsion copolymerization, the effect of the PEGMA content and molar mass and also of the content of CNCs on the kinetics of the polymerization and the stability of the latexes were investigated. The use of PEGMA 300 (M-n = 300 g mol(-1),2-10 wt %) allowed the formation of a stable latex, however, with a broad particle size distribution and the presence of both small (ca. 25-50 nm) and large (ca. 425-650 nm) particles (at 10 wt %, D-n = 278 nm and D-w/D-n = 1.34). Increasing the molar mass of PEGMA (PEGMA(950) or PEGMA(2080)) significantly increased the fraction of small partides. This was explained by the nucleation and growth of small polymer particles adsorbed at the CNCs' surface, resulting in a particular organization where the CNCs were covered by several polymer particles. The influence of the initial amount of CNCs in these systems was finally evidenced, the polymerization being faster as the content of CNCs increased, but only the latexes prepared with 2 and 5 wt % of CNCs were stable., QC 20210127

QCR 20200205

Latex colloids are among the most promising materials for broad thin film applications due to their facile surface functionalization. Yet, the effect of these colloids on chemical film and wetting properties cannot be easily evaluated. At the nanoscale, core–shell particles can deform and coalesce during thermal annealing, yielding fine-tuned physical properties. Two different core–shell systems (soft and rigid) with identical shells but with chemically different core polymers and core sizes are investigated. The core–shell nanoparticles (NPs) are probed during thermal annealing in order to investigate their behavior as a function of nanostructure size and rigidity. X-ray scattering allows to follow the re-arrangement of the NPs and the structural evolution in situ during annealing. Evaluation by real-space imaging techniques reveals a disappearance of the structural integrity and a loss of NP boundaries. The possibility to fine-tune the wettability by tuning the core–shell NPs morphology in thin films provides a facile template methodology for repellent surfaces., QC 20200630

Enzyme-catalyzed transformations have a great potential in both the pharmaceutical and chemical industry to achieve complex and (stereo)selective synthesis under mild reaction conditions. Still, the implementation of biocatalysis in the prerequisite upgrading of inert synthons into activated monomers for polymer applications has not yet been fully realized. In this contribution, we show that scaled-up synthesis of bicyclic norcamphor lactone using an engineered Baeyer–Villiger monooxygenase (BVMO) is feasible to reach complete conversion of the corresponding ketone in 24 h in shake-flask. The lactone monomer obtained by enzyme catalysis was copolymerized with ε-caprolactone via ring-opening polymerization to study the impact of the additional ring on material properties. Moreover, four-arm star-like, homo and block copolymers were designed from ε-caprolactone, ε-decalactone, and norcamphor lactone and characterized for their structural and thermal properties. These newly explored macromolecules were functionalized with furan rings using the enzyme Candida antarctica lipase B which allowed the formation of thermolabile networks via the pericyclic reaction with bismaleimide by means of Diels–Alder chemistry. The bonding/debonding state of these star-like based materials can be tuned by a suitable selection of thermal treatment. The temperature-dependent reversibility was assessed by thermal analysis and solubility test. Our results presented here shed light on the high potential of the use of chemoenzymatic approaches in the synthesis of new functional materials with tuned physiochemical properties., QC 20200421

This study highlights the beneficial role of cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) as components in functional membranes. The approaches of the use of CNF and CNC as membrane materials Ibr water purification have been studied extensively during the past decades. This is due to their inherent abundance, renewability, sustainability and unique properties such as high aspect ratio, high surface area, high crystallinity, and high mechanical properties. The performance of CNF- and CNC-based membranes especially in treating actual water samples were also highlighted in this review to give a better overview of the behavior of these nanocellulose as membrane materials. The challenges of using CNFs and CNCs and the needfor improvements for the future development of membrane materials are also discussed., QC 20210211

QC 20190918

QC 20190919

QC 20190919

QC 20190919

QC 20190903

QC 20200528

This work demonstrates a versatile and environmentally friendly route for the development of new orthogonal monomers that can be used for postfunctionalizable polymer networks. A monomer containing both vinyl ether (VE) and cyclic disulfide moieties was synthesized via enzyme catalysis under benign reaction conditions. The bifunctional monomer could be polymerized to form macromolecues with differing architectures by the use of either cationic or radical photo polymerization. When cationic polymerization was performed, a linear polymer was obtained with pendant disulfide units in the side chain, whereas in the presence of radical initiator, the VE reacted with the disulfide to yield a branched structure. The monomer was thereafter used to design networks that could be postfunctionalized; the monomer was cross-linked with cationic initiation together with a difunctional VE oligomer and after cross-linking the unreacted disulfides were coupled to RhodamineVE by radical UV-initiation., QC 20190425

Significantly increased production of biobased polymers is aprerequisite to replace petroleum-based materials towardsreaching a circular bioeconomy. However, many renewablebuilding blocks from wood and other plant material are notdirectly amenable for polymerization, due to their inert backbonesand/or lack of functional group compatibility with thedesired polymerization type. Based on a retro-biosyntheticanalysis of polyesters, a chemoenzymatic route from (@)-apinenetowards a verbanone-based lactone, which is furtherused in ring-opening polymerization, is presented. Generatedpinene-derived polyesters showed elevated degradation andglass transition temperatures, compared with poly(e-decalactone),which lacks a ring structure in its backbone. Semirationalenzyme engineering of the cyclohexanone monooxygenasefrom Acinetobacter calcoaceticus enabled the biosynthesis ofthe key lactone intermediate for the targeted polyester. As aproof of principle, one enzyme variant identified from screeningin a microtiter plate was used in biocatalytic upscaling,which afforded the bicyclic lactone in 39% conversion in shakeflask scale reactions., QC 20191008

Cationic latexes with Tgs ranging between −40 °C and 120 °C were synthesised using n-butyl acrylate (BA) and/or methyl methacrylate (MMA) as the core polymers. Reversible addition–fragmentation chain transfer (RAFT) combined with polymerisation-induced self-assembly (PISA) allowed for in situ chain-extension of a cationic macromolecular RAFT agent (macroRAFT) of poly(N-[3-(dimethylamino)propyl] methacrylamide) (PDMAPMA), used as stabiliser in so-called surfactant-free emulsion polymerisation. The resulting narrowly distributed nanosized latexes adsorbed readily onto silica surfaces and to model surfaces of cellulose nanofibrils, as demonstrated by quartz crystal microbalance with dissipation monitoring (QCM-D) measurements. Adsorption to anionic surfaces increased when increasing ionic strength to 10 mM, indicating the influence of the polyelectrolyte effect exerted by the corona. The polyelectrolyte corona affected the interactions in the wet state, the stability of the latex and re-dispersibility after drying. The QCM-D measurements showed that a lower Tg of the core results in a more strongly interacting adsorbed layer at the solid–liquid interface, despite a comparable adsorbed mass, indicating structural differences of the investigated latexes in the wet state. The two latexes with Tg below room temperature (i.e. PBATg-40 and P(BA-co-MMA)Tg3) exhibited film formation in the wet state, as shown by AFM colloidal probe measurements. It was observed that P(BA-co-MMA)Tg3 latex resulted in the largest pull-off force, above 200 m Nm−1 after 120 s in contact. The strongest wet adhesion was achieved with PDMAPMA-stabilized latexes soft enough to allow for interparticle diffusion of polymer chains, and stiff enough to create a strong adhesive joint. Fundamental understanding of interfacial properties of latexes and cellulose enables controlled and predictive strategies to produce strong and tough materials with high nanocellulose content, both in the wet and dry state., QC 20190123

QC 201902

QC 20190218

QC 20190218

Sobrerol methacrylate (SobMA) was synthesized and subsequently polymerized using different chemical and enzymatic routes. Sobrerol was enzymatically converted from -pinene in a small model scale by a Cytochrome P450 mutant from Bacillus megaterium. Conversion of sobrerol into SobMA was performed using both classical ester synthesis, i.e., acid chloride-reactions in organic solvents, and a more green approach, the benign lipase catalysis. Sobrerol was successfully esterified, leaving the tertiary alcohol and ene to be used for further chemistry. SobMA was polymerized into PSobMA using different radical polymerization techniques, including free radical (FR), controlled procedures (Reversible Addition Fragmentation chain-Transfer polymerization, (RAFT) and Atom Transfer Radical Polymerization (ATRP)) as well as by enzyme catalysis (horseradish peroxidase-mediated free radical polymerization). The resulting polymers showed high glass-transition temperatures (T-g) around 150 degrees C, and a thermal degradation onset above 200 degrees C. It was demonstrated that the T-g could be tailored by copolymerizing SobMa with appropriate methacrylate monomers and that the Flory-Fox equation could be used to predict the T-g. The versatility of PSobMA was further demonstrated by forming crosslinked thin films, either using the ene'-functionality for photochemically initiated thiol-ene'-chemistry, or reacting the tertiary hydroxyl-group with hexamethoxymethylmelamine, as readily used for thermally curing coatings systems., QC 20190812

EDC-mediated coupling has frequently been utilized to poly(ethylene glycol) functionalize (PEGylate) cellulose-based materials, but no work has previously been reported on the direct N-(3-dimethylaminopropyl)-N-ethylcarbodiimide (EDC)-mediated PEGylation of cellulose nanofibrils (CNF). Herein, we report the first study where CNF has been directly sterically stabilized with amine-terminated PEG employing N-hydroxysuccinimide (NHS)-assisted EDC-coupling. This work has shown that this coupling reaction is highly sensitive to the reaction conditions and purification procedures, and hence an optimized coupling protocol was developed in order to achieve a reaction yield. Elemental analysis of the nitrogen content also showed the successful PEGylation. It was also shown that a surprisingly low PEGylation (1%) is sufficient to significantly improve the colloidal stability of the PEGylated samples, which reached dispersion-arrested-state-transitions at higher concentrations than neat CNF. The colloidal stability was preserved with increasing ionic strength, when comparably long polymer chains were grafted, targeting only 1% PEGylation., QC 20171220

This work reports the development of a sustainable and green one-step wet-feeding method to prepare tougher and stronger nanocomposites from biodegradable cellulose nanofibrils (CNF)/polycaprolactone (PCL) constituents, compatibilized with reversible addition fragmentation chain transfer-mediated surfactant-free poly(methyl methacrylate) (PMMA) latex nanoparticles. When a PMMA latex is used, a favorable electrostatic interaction between CNF and the latex is obtained, which facilitates mixing of the constituents and hinders CNF agglomeration. The improved dispersion is manifested in significant improvement of mechanical properties compared with the reference material. The tensile tests show much higher modulus (620 MPa) and strength (23 MPa) at 10 wt % CNF content (compared to the neat PCL reference modulus of 240 and 16 MPa strength), while maintaining high level of work to fracture the matrix (7 times higher than the reference nanocomposite without the latex compatibilizer). Rheological analysis showed a strongly increased viscosity as the PMMA latex was added, that is, from a well-dispersed and strongly interacting CNF network in the PCL., QC 20190123

Field-grading materials (FGMs) are used to reduce the probability for electrical breakdowns in critical regions of electrical components and are therefore of great importance. Usually, FGMs are heavily filled (40 vol.%) with semi-conducting or conducting particles. Here, polymer-grafted reduced graphene oxide (rGO) is used as a filler to accomplish percolated networks at very low filling ratios (<2 vol.%) in a semi-crystalline polymer matrix: poly(ethylene-co-butyl acrylate) (EBA). Various simulation models are used to predict the percolation threshold and the flake-to-flake distances, to complement the experimental results. A substantial increase in thermal stability of rGO is observed after surface modification, either by silanization or subsequent polymerizations. The non-linear DC resistivity of neat and silanized rGO and its trapping of charge-carriers in semi-crystalline EBA are demonstrated for the first time. It is shown that the polymer-grafted rGO improve the dispersibility in the EBA-matrix and that the graft length controls the inter-flake distances (i.e. charge-carrier hopping distances). By the appropriate selection of graft lengths, both highly resistive materials at 10 kV mm-1 and FGMs with a large and distinct drop in resistivity (six decades) are obtained, followed by saturation. The nonlinear drop in resistivity is attributed to narrow inter-flake distance distributions of grafted rGO., QC 20170323. QC 20191105

A series of renewable unsaturated polyesters were synthesized from itaconic acid (IA), succinic acid, and 1,4-butanediol by solvent-free polycondensation. Previous studies utilizing IA to make polyesters for coating applications have shown great potential; however, the curing and material properties have not been investigated in detail. The aim of this study was to investigate how the curing is affected by the amount of unsaturations and how well itaconate-based polyesters crosslink without the addition of any other unsaturated monomers or reactive diluents. The chemical structures of the polyesters were confirmed with FTIR, 1 HNMR, and THF-SEC. The degree of curing was studied with FTIR, and the mechanical properties of the crosslinked polyesters were evaluated with DMA, pendulum hardness, and microindentation. The degree of curing was found to be up to 75%, and furthermore, it was found that the final mechanical properties of the crosslinked coatings could be tuned by modifying the IA content in the monomer composition. The results from DMA showed that there is a clear trend between mechanical properties and crosslinking density., QC 20170825

In the present work, cellulose nanocrystals (CNCs) have been surface-modified either via covalent grafting or through physisorption of poly(n-butyl methacrylate) (PBMA) and employed as reinforcement in PCL. Covalent grafting was achieved by surface-initiated atom transfer radical polymerization (SI-ATRP). Two approaches were utilized for the physisorption: using either micelles of poly(dimethyl aminoethyl methacrylate)-block-poly(n-butyl methacrylate) (PDMAEMA-b-PBMA) or latex nanoparticles of poly(dimethyl aminoethyl methacrylate-co-methacrylic acid)-block-poly(n-butyl methacrylate) (P(DMAEMA-co-MAA)-b-PBMA). Block copolymers (PDMAEMA-b-PBMA)s were obtained by ATRP and subsequently micellized. Latex nanoparticles were produced via reversible addition-fragmentation chain-transfer (RAFT) mediated surfactant-free emulsion polymerization, employing polymer-induced self-assembly (PISA) for the particle formation. For a reliable comparison, the amounts of micelles/latex particles adsorbed and the amount of polymer grafted onto the CNCs were kept similar. Two different chain lengths of PBMA were targeted, below and above the critical molecular weight for chain entanglement of PBMA (M-n,M-c similar to 56 000 g mo1(-1)). Poly(epsilon-caprolactone) (PCL) nanocomposites reinforced with unmodified and modified CNCs in different weight percentages (0.5, 1, and 3 wt %) were prepared via melt extrusion. The resulting composites were evaluated by UV-vis, scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and tensile testing. All materials resulted in higher transparency, greater thermal stability, and stronger mechanical properties than unfilled PCL and nanocomposites containing unmodified CNCs. The degradation temperature of PCL reinforced with grafted CNCs was higher than that of micelle-modified CNCs, and the latter was higher than that of latex-adsorbed CNCs with a long PBMA chain length. The results clearly indicate that covalent grafting is superior to p, QC 20171102

Polymer grafts were used to tailor the interphases between ZnO nanoparticles (NPs) and silicone matrices. The final electrical properties of the nanocomposites were tuned by the grafted interphases, by controlling the inter-particle distance and the NP-morphology. The nanocomposites can be used in electrical applications where control of the resistivity is desired. Hansen's solubility parameters were used to select a semi-compatible polymer for grafting to obtain anisotropic NP morphologies in silicone, and the grafted NPs self-assembled into various morphologies inside the silicone matrices. The morphologies in the semi-compatible nanocomposites could be tuned by steering the graft length of poly(n-butyl methacrylate) via entropic matrix-graft wetting using surface-initiated atom-transfer radical polymerization. Image analysis models were developed to calculate the radius of primary NPs, the fraction of aggregates, the dispersion, and the face-to-face distance of NPs. The dielectric properties of the nanocomposites were related to the morphology and the face-to-face distance of the NPs. The dielectric losses, above 100 Hz, for nanocomposites with grafted NPs were approximately one decade lower than those of pristine NPs. The isotropic nanocomposites increased the resistivity up to 100 times compared to that of neat silicone rubber, due to the trapping of charge carriers by the interphase of dispersed NPs and nanoclusters. On the other hand, the resistivity of anisotropic nanocomposites decreased 10–100 times when the inter-particle distance in continuous agglomerates was close to the hopping distance of charge carriers. The electrical breakdown strength increased for compatible isotropic nanocomposites, and the temperature dependence of the resistivity and the activation energy were ∼50% lower in the nanocomposites with grafted NPs. These flexible dielectric nanocomposites are promising candidates for low-loss high-voltage transmission cable accessories, mobile ele, QC 20170323

A biomimetic, facile approach to cellulose modification is the utilisation of self-adsorbing, naturally occurring biopolymers, such as the hemicellulose xyloglucan (XG). Herein, XG-block-poly(sulfobetaine methacrylate) (XG-b-PSBMA) zwitterionic block copolymers have been prepared and assessed for their ability to adsorb to cellulose, specifically cellulose nanofibrils (CNF). The polymers were synthesised using reversible addition-fragmentation chain-transfer (RAFT) polymerisation, employing an XG macromolecular RAFT agent (XG-RAFT), polymerising a sulfobetaine methacrylate (SBMA) under aqueous conditions. The incorporation of the XG block shifted the upper critical solution temperature (UCST) values to higher temperatures (20 and 30 °C) compared with the PSBMA homopolymers (17 and 22 °C) and the transition was also broadened. The adsorption of the polymers to a CNF surface was monitored using quartz crystal microbalance with dissipation monitoring (QCM-D), showing that the XG block enhanced the adsorption of the zwitterionic polymer. The formation of CNF-composite films was achieved utilising a facile vacuum filtration methodology, and the targeted compositions were confirmed by FT-IR and TGA analyses. The films exhibited high degrees of swelling in water, which were investigated at two different temperatures, 5 and 60 °C (below and above the polymer USCT values). These results highlight the advantage of using an XG block for the biomimetic modification of cellulose to form new cellulose-composite materials such as super-absorbing films., QC 20170523

Correction in Figure 8 for ‘Hydrophobic matrix-free graphene-oxide composites with isotropic and nematic states’ by Martin Wåhlander, et al., Nanoscale, 2016, DOI: 10.1039/c6nr01502f, QC 20160929, Hydrophobic matrix-free graphene-oxide composites with isotropic and nematic states

We demonstrate a novel route to synthesise hydrophobic matrix-free composites of polymer-grafted graphene oxide (GO) showing isotropic or nematic alignment and shape-memory effects. For the first time, a cationic macroinitiator (MI) has been immobilised on anionic GO and subsequently grafted with hydrophobic polymer grafts. Dense grafts of PBA, PBMA and PMMA with a wide range of average graft lengths (MW: 1–440 kDa) were polymerised by surface-initiated controlled radical precipitation polymerisation from the statistical MI. The surface modification is designed similarly to bimodal graft systems, where the cationic MI generates nanoparticle repulsion, similar to dense short grafts, while the long grafts offer miscibility in non-polar environments and cohesion. The state-of-the-art dispersions of grafted GO were in the isotropic state. Transparent and translucent matrix-free GO-composites could be melt-processed directly using only grafted GO. After processing, birefringence due to nematic alignment of grafted GO was observed as a single giant Maltese cross, 3.4 cm across. Permeability models for composites containing aligned 2D-fillers were developed, which were compared with the experimental oxygen permeability data and found to be consistent with isotropic or nematic states. The storage modulus of the matrix-free GO-composites increased with GO content (50% increase at 0.67 wt%), while the significant increases in the thermal stability (up to 130 °C) and the glass transition temperature (up to 17 °C) were dependent on graft length. The tuneable matrix-free GO-composites with rapid thermo-responsive shape-memory effects are promising candidates for a vast range of applications, especially selective membranes and sensors., QC 20160929

In the present work, poly(vinyl acetate) grafted cellulose nanocrystals (CNC-g-PVAc) were prepared via surface initiated reversible addition-fragmentation chain transfer and macromolecular design via the interchange of xanthates (SI-RAFT/MADIX) polymerization. Successful grafting of PVAc from CNC was confirmed by FT-IR and TGA analysis. PVAc nanocomposites reinforced with CNC-g-PVAc, as well as pristine CNC for comparison, of different weight percentages (0.5, 1, 3 and 5 wt%) of CNC were prepared via solvent casting. The PVAc reinforced with CNC-g-PVAc resulted in higher transparency and improved mechanical properties compared with unmodified CNC nanocomposites. The addition of 5 wt% CNC-g-PVAc increased the modulus of neat PVAc with as much as 154%. The proposed SI-RAFT/MADIX on CNC could be applied to wide range of monomers, and it is believed to be an efficient and robust method for CNC functionalization, thus expanding the potential applicability of CNC., QC 20161020

The study presented describes the preparation of solvent-free nano composite gel electrolytes in combination with copper(I)-based dye-sensitized solar cells (DSSCs). The electrolytes comprise poly(ethylene oxide) (PEO) and cellulose nano crystals (CNCs) and an I-3(-)/I- redox shuttle. The quasi-solid-state DSSCs show increased photoconversion performance with increased amount of CNC in the electrolyte. DSSC performances measured on the day that the devices are fabricated show that when the electrolyte is composed of 80% CNC, a cell efficiency of 1.09% is reached compared to 1.16% using a standard liquid I-3(-)/I- electrolyte. DSSCs containing the nano composites and the copper(I)-based dye show robust stability over time, and after 60 days, DSSCs with the PEO/CNC/I-3(-)/I- electrolyte outperform those containing the liquid electrolyte., QC 20160718

Histamine functionalized block copolymers based on poly(allyl glycidyl ether)-b-poly(ethylene oxide) (PAGE-b-PEO) were prepared with different ratios of histamine and octyl or benzyl groups using UV-initiated thiol-ene click chemistry. At neutral pH, the histamine units are uncharged and hydrophobic, while in acidic environments, such as in the endosome, lysosomes, or extracellular sites of tumours, the histamine groups are positively charged and hydrophilic. pH responsible polymer drug delivery systems is a promising route to site specific delivery of drugs and offers the potential to avoid side effects of systemic treatment. Our detailed in vitro experiments of the efficacy of drug delivery and the intracellular localization characteristics of this library of NPs in 2D and 3D cultures of breast cancer revealed that the 50% histamine-modified polymer loaded with DOX exhibited rapid accumulation in the nucleus of free DOX within 2 h. Confocal studies showed enhanced mitochondrial localization and lysosomal escape when compared to controls. From these combined studies, it was shown that by accurately tuning the structure of the initial block copolymers, the resulting self-assembled NPs can be designed to exploit histamine as an endosomal escape trigger and the octyl/benzyl units give rise to a hydrophobic core resulting in highly efficacious drug delivery systems (DDS) with control over intracellular localization. Optimization and rational control of the intracellular localization of both DDS and the parent drug can give nanomedicines a substantial increase in efficacy and should be explored in future studies., QC 20150420

QC 20200310

Wood adhesives are mainly prepared from polymers derived from petroleum-based resources. With the increasing concern for the environment, it is necessary to find alternatives derived from bio-based resources that can replace petroleum-based polymers. To enable this transition it is important that the adhesive properties in terms of bond strength, water resistance and heat resistance are similar, and that the alternative can compete in terms of cost. Hemicelluloses are a byproduct from the pulp industry. From environmental and economic perspectives it is preferable to utilize all components from wood and decrease the amount of low-value byproducts. In this study, hemicelluloses are suggested to be used as binders in wood adhesives, why water dispersions of xylan have been prepared and evaluated. However, xylan itself cannot be used as a wood adhesive due to its limited bonding performance, especially regarding the water resistance. With the addition of dispersing agents, poly(vinyl alcohol) or poly(vinyl amine), and crosslinkers, such as glyoxal or hexa(methoxymethyl) melamine, the xylan dispersions demonstrate promising results. Wood veneers bonded with xylan dispersions and evaluated with ABES, Automated Bonding Evaluation System, demonstrate a good bond strength and surprisingly good water resistance. Several xylan dispersions fulfill the D1 and WATT 91 requirements for wood adhesives according to European Standards EN 204 and EN 14257, exhibiting good bond strength and heat resistance. Xylan dispersed in a poly(vinyl amine) solution also shows remarkable water resistance and reaches the threshold for the D2 criterion according to European Standard EN 204., QC 20150812

Redox-sensitive hyperbranched dendritic-linear polymers (HBDLPs) were prepared and stabilized individually as unimolecular micelles with diameters in the range 25–40 nm. The high molecular weight (500–950 kDa), core–shell amphiphilic structures were synthesized through a combination of self-condensing vinyl copolymerization (SCVCP) and atom transfer radical polymerization (ATRP). Cleavable disulfide bonds were introduced, either in the backbone, or in pendant groups, of the hyperbranched core of the HBDLPs. By triggered reductive degradation, the HBDLPs showed up to a 7-fold decrease in molecular weight, and the extent of degradation was tuned by the amount of incorporated disulfides. The HBDLP with pendant disulfide-linked functionalities in the hyperbranched core was readily postfunctionalized with a hydrophobic dye, as a mimic for a drug. An instant release of the dye was observed as a response to a reductive environment similar to the one present intracellularly. The proposed strategy shows a facile route to highly stable unimolecular micelles, which attractively exhibit redox-responsive degradation and cargo release properties., QP 201509

The photoinduced controlled radical polymerisation (CRP) technique has been utilised to graft methyl acrylate (MA) and di(ethylene glycol) ethyl ether acrylate (DEGA) from filter paper. Grafting of MA was performed from alpha-bromoisobutyryl bromide functionalised papers. The amount of polymer grafted on the surface could be regulated by modifying the target DP of the reaction. SEC of cleaved linear polymer grafts showed that the grafting from filter papers proceeded with different kinetics compared to polymerisation from a free initiator added to the reaction mixture, resulting in higher dispersity. Furthermore, filter papers were polymerised with a-chloro-epsilon-caprolactone by surface-initiated ring opening polymerisation, yielding linear grafts containing initiating functions through-out the main chain. This functionality was subsequently utilised for the photoinduced CRP grafting of DEGA, yielding a graft-on-graft structure, which resulted in a thermoresponsive cellulose surface., QC 20150423