Search

Background: Wide axillary reconstruction after hidradenitis suppurativa (HS) excision still represents a great challenge. Thoracodorsal artery perforator flap is one of the most reliable local reconstructive techniques. Although its anatomy and harvesting technique have been well described, specific reconstructive criteria still lack. The aim of this study was to help surgeons in planning axillary reconstruction on flaps based on the thoracodorsal artery., Methods: Twelve patients affected by HS at Hurley stage III underwent wide "en block" excision and immediate reconstruction with 15 local thoracodorsal artery perforator flaps and 2 muscle-sparing latissimus dorsi flaps. A thorough chart review has been performed with preoperative and postoperative photographic documentations. Early and late complications have been analyzed., Results: A total of 15 perforator flaps on thoracodorsal artery and 2 muscle-sparing latissimus dorsi flaps have been raised. The early complication rate was 29%, whereas the late complication rate was 35%. Except for one, all patients declared they were satisfied or highly satisfied from both aesthetic and functional points of view. Analyzing specific aspects, we have described several important details to consider for the reconstruction of the axilla. Through a retrospective analysis, we have classified HS axillary patients into 4 categories to better plan surgical reconstruction., Conclusions: Axillary reconstruction is still a plastic surgery challenge. Peculiar surgical details should be considered when approaching this area. This new classification may help young surgeons during the reconstructive phase.

Background: The use of various latissimus dorsi (LD) flap types in combination with implants is a safe and reliable 1-stage breast reconstruction method. However, 1 or more positional changes are generally required during the procedure. We designed a vertical skin paddle that was centered along the midaxillary line and harvested the required LD muscle amount based on the thoracodorsal artery descending branch, thereby completing flap elevation, inset, and donor-site closure in the supine position following skin-sparing mastectomy., Methods: Between July 2017 and September 2017, we enrolled patients who underwent breast reconstruction using the vertical muscle-sparing LD (ms-LD) flap with an implant. The vertical ms-LD flap was selected when the nipple-areolar complex could not be spared or when adjuvant radiation therapy was anticipated., Results: Eleven patients were enrolled in the study. All patients underwent skin-sparing mastectomy (with excision of the nipple-areolar complex for oncological reason). The mean mastectomy specimen weight was 402.3 g. The average flap length and width were 15.2 and 5.5 cm, respectively. The mean implant size was 290 mL. The average operative time was 112 minutes. All surgical procedures were performed in the supine position, and the flap reached the most medial part of the breast without any tension in all cases. The mean follow-up length was 87 days, and no complications such as infection, partial flap loss, or donor-site seroma were observed., Conclusions: Vertical ms-LD flaps can be harvested and utilized in direct-to-implant reconstructions when a skin paddle (or banking) is required, or when acellular dermal matrix use is precluded, or when additional soft tissue coverage is mandatory in high-risk patients not requiring intraoperative position changes. This technique can shorten the operation time and may reduce donor-site morbidity and associated complications.

Introduction: Latissimus dorsi (LD) flap has been used for reconstructive purposes in oncoplastic breast surgery. Using large part of the muscle as a flap leads to a residual functional loss. Muscle sparing and mini LD flaps can be used with no functional sequelae. However, the design of such flap presents a challenge., Methods: Twenty cadavers were dissected on both sides to identify the different vascular patterns of the thoracodorsal (TD) pedicle. The vessels were counted, and the following measurements were taken: diameter, length, distance from inferior angel of scapula, and vertebral level. Data were collected and entered into the personal computer. Statistical analysis was done using (SPSS/version 20) software., Results: Five vascular patterns of TD pedicle were found. Type 1: a long vertically descending pedicle giving 3 to 4 transverse medial branches to LD in 40%. Type 2: a short pedicle terminating into 1 to 2 serratus anterior collaterals and 1 to 2 transverse lateral branches to LD in 10%. Type 3: a long vertically descending pedicle giving 2 to 3 small lateral branches to upper part of LD and terminating into medial and lateral branches in the lower part of LD in 10%. Type 4: a short pedicle that gives 4 to 5 terminal branches to LD, one of them is a long vertically descending branch to lower part of LD in 20%. Type 5: a short pedicle that terminates into a transverse medial and a long vertical branch to LD in 20%., Conclusion: The classically described pattern of TD pedicle (type 5) was found in 20% of cases, whereas the most commonly found pattern was type 1. This means that the pattern of TD branching is unpredictable, and a preoperative ultrasound is essential to define the existing pattern and plan the best LD flap design for each patient. In types 1 and 5, the flap can be designed using the transverse medial branch or branches. In type 2, one of the lateral transverse branches can be used. In types 3, 4, and 5, the long descending vertical branch can be used. It has a sizeable diameter (1.80.23 mm), length (12.31.64 cm), and can be located 6.50.96 cm below the inferior angle of scapula.

Background: Botulinum toxin-A (BTX) has numerous cosmetic and therapeutic applications. Our previous studies have found that BTX augments pedicled flap survival through both vasodilatory effects and attenuation of the inflammatory response to ischemia in the rat. This study examines the effect of chronic BTX on microcirculatory vascular tone and its response to acute topical vasodilators in muscle flaps., Methods: The spinotrapezius muscle of Sprague-Dawley rats underwent a single 2-week pretreatment of 0.2 mL saline either with (n = 5) or without (n = 5) 2u BTX. After surgical elevation, an arcade arteriole was observed using a video caliper device. Vessel diameter was measured at 30-second intervals after sequential superfusion of nitroglycerin (100 and 200 μg/mL), multiple concentrations of lidocaine, and a combination of adenosine (10 μM) and nitroprusside (10 μM) to induce maximum dilation., Results: Baseline and dilation diameters were expressed as ratios of pharmacologically induced maximum dilation, whereas percent dilation was defined as the change in diameter over baseline diameter. We found a significant increase in resting diameter with BTX pretreatment (P = 0.0028). Compared with the control group, mean baseline diameter was 15% greater, and percent dilation was 25% less in BTX-pretreated flaps. There was no significant relationship between BTX pretreatment and dilation diameter (P = 0.2895) after adjusting for the effect of acute vasodilators., Conclusions: Pretreatment with BTX may induce the arteriolar resting diameter to be closer to their maximum potential diameter. Additionally, BTX does not display a synergistic effect with topical vasodilators on vasodilation.

Free flaps have rarely been used to reconstruct lumbosacral defects, primarily because of the lack of suitable recipient vessels in this region. We propose the novel use of the superior rectal artery as a recipient vessel for free flap transfer after partial or total sacrectomy. We transferred free flow-through latissimus dorsi musculocutaneous flaps, with the superior rectal vessels as recipient vessels, to reconstruct defects after partial sacrectomy in 2 patients with sacral chordoma. The flaps survived completely, and the wounds healed uneventfully in both patients. The superior rectal artery is easier to dissect and anastomose than are gluteal vessels and is less affected by patients' postoperative postural change than are extraperitoneal vessels. We believe that the superior rectal artery is a versatile recipient vessel for free flap transfer to reconstruct sacrectomy defects.

Purpose: The reconstruction of complicated defects with 3-dimensional deficits remains challenging. The reconstruction of these defects requires not only coverage of surface but also appropriate obliteration of dead space, and muscle-chimeric perforator flaps can be a valuable option. Here, we present our experience with free latissimus dorsi (LD) muscle-chimeric thoracodorsal artery perforator (TDAP) flaps for the treatment of complicated defects., Methods: A retrospective chart review was performed for patients who underwent a free LD muscle-chimeric TDAP flap procedure for the treatment of complicated wounds with 3-dimensional tissue deficits between March 2005 and October 2012. The surgical technique, clinical outcomes, and postoperative complications were evaluated., Results: A total of 24 cases were included. All flaps survived and no partial flap losses were encountered. Large skin flaps of 115 cm average size were elevated, with an average of 38-cm muscle segments. The total length of pedicle was 12.2 cm on average, with 7.3 cm of common pedicle, 4.9 cm of skin paddle, and 3.4 cm of muscle segments. Muscle segments could be inset in the underlying dead space with spatial freedom. The mean follow-up period was 34.1 months. Wounds successfully healed in all cases without significant postoperative complications. The donor-site complication rate of the chimeric flap group was similar to that of the simple TDAP group., Conclusions: The use of LD muscle-chimeric TDAP flaps with Y-pedicle configurations allowed efficient positioning of both skin and muscle components for their specific purposes and successful healing of complicated wounds. The muscle components of chimeric flaps acted as "filler flaps" and were an effective addition to the perforator flap technique for the reconstruction of complicated defects without the addition of significant donor-site morbidity.

Background: Multiple variations of the musculocutaneous trapezius flap have been described, each of which use a single composite musculocutaneous unit in their designs. The limitation of such designs is the ability to use the components in a 3-dimensional manner, with only 1 vector existing in the geometry of the musculocutaneous unit., Methods: A review of the literature was undertaken with regard to designs of the musculocutaneous trapezius flap, and we present a new technique for flap design. With identification of individual perforators to each of the muscle and fasciocutaneous portions of the trapezius flap, the 2 components can act in a chimeric fashion, able to fill both a deep and complex 3-dimensional space while covering the wound with robust skin., Results: A range of flap designs have been described, including transverse, oblique, and vertical skin paddles accompanying the trapezius muscle. We describe a technique with which a propeller-style skin paddle based on a cutaneous perforator can be raised in any orientation with respect to the underlying muscle. In a presented case, separation of the muscular and fasciocutaneous components of the trapezius flap was able to obliterate dead space around exposed cervicothoracic spinal metalwork and obtain robust wound closure in a patient with previous radiotherapy., Conclusions: This concomitant use of a muscle and fasciocutaneous perforator flap based on a single perforator, a so-called chimeric perforator flap, is a useful modification to trapezius musculocutaneous flap design.