Search

Achieving the global electricity demand and meeting the United Nations sustainable development target on reliable and sustainable energy supply by 2050 are crucial. Portable energy storage (PES) units, powered by solid-state battery cells, can offer a sustainable and cost-effective solution for regions with limited power-grid access. However, operating in high-dust and high-temperature environments presents challenges that require effective thermal management solutions. This paper is a comprehensive review of thermal management systems for PES units, with a specific focus on addressing the challenge of overheating in airtight designs. The review of various active and passive cooling systems is conducted through extensive study of the relevant literature, which is significant in providing insights into the operation, performance parameters, and design options for different cooling system technologies. The findings from this review show heat pipe (HP) technologies as key cooling-system solutions for airtight PES units. Specifically, loop and oscillating HPs, as well as the vapour chamber, offer desirable features such as compactness, low cost, and high thermal conductivity that make them superior to other alternatives for the cooling systems in PES. The insights and knowledge generated via this review will help facilitate the design and development of innovative, efficient, and reliable PES units, thereby contributing to the advancement of off-grid renewable energy applications and enabling sustainable power solutions worldwide. Furthermore, an appropriate design of PES units can help in reducing capital and maintenance costs. [ABSTRACT FROM AUTHOR]

This paper presents a novel technology to improve the energy efficiency of refrigeration and air-conditioning (RAC) systems by applying a condenser cooling approach. The approach is based on the integration of an innovative radiation-enhanced thermal diode tank (RTDT) with a RAC system. The thermal diode tank (TDT), consisting of heat pipes and an insulated water tank, is a passive device to generate cooling water at a minimum night ambient temperature. When the radiation-enhanced heat pipe (RHP) is equipped with the TDT, it becomes an RTDT, which could theoretically lower the water temperature below the ambient temperature. In this study, a radiation-enhanced thermal diode tank (RTDT) is proposed to supply cooling water to the RAC system. Simulation models for the proposed RTDT-assisted RAC (RTDT-RAC) system are developed in order to investigate the impacts of the tank size to cooling capacity (TS/Qc) ratio, day/night ambient temperature fluctuations on the system's coefficient of performance (COP) and the energy saving percentage (ESP). The results show that a greater day/night ambient temperature difference and a larger TS/Qc value can both enhance the COP and ESP of the RTDT-RAC system. The optimal and threshold TS/Qc values were 1 m3/kW and 0.18 m3/kW, respectively. These findings demonstrate the potential of the RTDT-RAC system to achieve significant energy savings and provide valuable insights for the design and optimization of an RTDT-RAC system. [ABSTRACT FROM AUTHOR]

This study concerns the numerical simulation and the experimental implementation of a low-scale Phase Change Material-based (PCM-based) condenser, to be included in a PCM-based portable cooling systems. In this category of cooling systems, the PCM can be integrated either in the condenser or in the evaporator. In the present study, the PCM is integrated in the condenser of the vapor compression cycle to absorb the heat power released from the refrigerant fluid (R134a) during condensation, thus eliminating the need to transfer heat to the external environment. The main objective of the present study is to realize and validate a numerical model capable of simulating both the refrigerant fluid and the PCM thermofluid dynamics. For this purpose, a commercial solver was used for the implementation of the developed numerical model, and experimental tests were performed to validate the numerical simulations results. The paper reports the details and test results of both the numerical model and the experimental apparatus. The simulation results indicate a good accordance between the numerical and experimental data. [ABSTRACT FROM AUTHOR]

This paper presents a new type of split natural cooling system that maximizes the use of natural cold energy to significantly reduce the power consumption of the air conditioning system in data centers. A split natural cooling system module, which consisted of indoor and outdoor heat exchanger based on micro heat pipe arrays connected by liquid circulation system, was selected for experimental research. The heat transfer process and flow characteristics were analyzed under different outdoor environment temperatures, air and water flow rates, and different ratios of heat transfer components (N) of indoor and outdoor heat exchangers. To improve the utilization of natural cold energy, two kinds of heat dissipation conditions, namely room and heat channel-based, were proposed. The indoor temperature of two conditions at 28 °C and 38 °C were simulated in the laboratory at constant temperature-humidity, respectively. Results indicated that the air flow rate had a greater influence on the heat transfer performance than the water flow rate. The pressure drop of the air and water sides was at a lower level, and the fitting curve of the pressure drop was obtained to provide a reference for the heat exchanger design and equipment selection. When the ratio of heat transfer components (N) of the indoor and outdoor heat exchanger was approximately 0.75, the split natural cooling system showed optimal comprehensive performance. Under heat channel-based conditions, the maximum heat transfer rate reached 12.4 kW, and the maximum energy efficiency ratio was 17.15; the maximum heat transfer rate and the maximum energy efficiency ratio increased by 42.5% and 22.64% compared with the room-based condition, respectively. The fitting curve of the energy efficiency ratio was calculated under different outdoor temperatures at two heat dissipation conditions. [ABSTRACT FROM AUTHOR]