Search

Since power transformers are the most important pieces of equipment in electricity transmission and distribution systems, special attention must be paid to their maintenance in order to keep them in good condition for a long time. This paper reviews the main steps in the process of diagnosing the health of power transformer insulation, which involves the science of analysing the gases dissolved in power transformer oil for effective identification of faults. An accurate diagnosis of incipient faults is favourable to sustainable development and necessary to maintain a reliable supply of electricity. The methods presented for fault diagnosis in mineral-oil-immersed power transformers are divided into analytical and graphical methods and have been found to be simple, economical and effective. After describing the methods, both their strengths and weaknesses were identified, and over the years, the methods were complemented to provide highly accurate information, validated by field inspections. This paper focuses on practical information and applications to manage maintenance based on accurate and up-to-date data. The contents of this paper will be of particular use to engineers who manufacture, monitor and/or use high-power transformers in the energy sector, as well as to undergraduate, master's and PhD students interested in such applications. [ABSTRACT FROM AUTHOR]

The electricity sector plays a key role in achieving zero emissions targets. The required transition will lead to substantial changes in the supply, demand, and distribution of electricity, as well as in stakeholder roles. Future market designs may change substantially to accommodate these changes, address challenges, and take advantage of new opportunities. This paper reviews the characteristics of future carbon-neutral electricity systems and electricity market design options. To provide a guiding framework for the literature review, we transfer the complexity of electricity systems into a three-layer structure: Firstly, we analyze papers that rely on techno-economic modeling of the physical electricity system. As a case study, we analyze various studies focusing on a decarbonized European electricity system in 2050. Secondly, we review papers that investigate the economic behavior and effects of self-interest-seeking stakeholders such as producers, network operators, and consumers. Finally, we review papers focusing on policy and market design questions that guide policymakers in achieving a target physical asset combination while considering the behavior of stakeholders. We highlight common trends and disagreements in the literature, review the main drivers of future markets, and finally provide a mapping between those drivers, challenges, and opportunities. The review concludes that the most promising next step toward a fully comprehensive assessment approach is to combine existing approaches across topical and disciplinary boundaries. [ABSTRACT FROM AUTHOR]

The ongoing electrification of the transport sector is expected to cause an increase in electricity demand and, therefore, trigger significant network investments to accommodate it. This paper focuses on investment decision-making for electricity distribution grids and specifically on the strategic and incremental investment network planning approaches. In particular, the former involves network planning with the consideration of a long-term multi-stage study horizon, as opposed to a shorter–term view of the future that applies to the latter case. An investment analysis that is carried out underlines the economic savings generated from adopting a strategic investment perspective over an incremental one. These economic savings are achieved from the fact that the associated fixed investment costs are incurred only once in the horizon under strategic planning. On the other hand, incremental planning involves a series of network reinforcement decisions, thereby incurring the fixed cost multiple times. In addition, sensitivity analyses that are carried out capture the effect of key parameters, such as investment cost, discount rate and investment delay, on the generated economic savings. [ABSTRACT FROM AUTHOR]

During the energy transition, new types of electrical equipment, especially power electronic devices, are proposed to increase the flexibility of electricity distribution grids. One type is the solid-state transformer (SST), which offers excellent possibilities to improve the voltage quality in electricity distribution grids and integrate hybrid AC/DC grids. This paper compares SST to conventional copper-based power transformers (CPT) with and without an on-load tap changer (OLTC) and with additional downstream converters. For this purpose, a corresponding electricity distribution grid is set up in the power system analysis tool DIgSILENT PowerFactory 2022. A DC generator like a photovoltaic system, a DC load like an electric vehicle fast charging station, and an AC load are connected. Based on load flow simulations, the four power transformers are compared concerning voltage stability during a generator-based and a load-based scenario. The results of load flow simulations show that SSTs are most valuable when additional generators and loads are to be connected to the infrastructure, which would overload the existing grid equipment. The efficiency of using SSTs also depends on the parameters of the electrical grid, especially the lengths of the low-voltage (LV) lines. In addition, a flowchart-based decision process is proposed to support the decision-making process for the appropriate power transformer from an electrical perspective. Beyond these electrical properties, an evaluation matrix lists other relevant criteria like characteristics of the installation site, noise level, expected lifetime, and economic criteria that must be considered. [ABSTRACT FROM AUTHOR]

Many emerging applications, such as factory automation, electric power distribution, and intelligent transportation systems, require multicast Ultra-Reliable Low-Latency Communications (mURLLC). Since 3GPP Release 17, 5G systems natively support multicast functionality, including multicast Hybrid Automatic Repeat Request and various feedback schemes. Although these features can be promising for mURLLC, the specifications and existing studies fall short in offering guidance on their efficient usage. This paper presents the first comprehensive system-level evaluation of mURLLC, leveraging insights from 3GPP specifications. It points out (i) how mURLLC differs from traditional multicast broadband wireless communications, and (ii) which approaches to provide mURLLC require changing the paradigm compared with the existing solutions. Finally, the paper provides recommendations on how to satisfy strict mURLLC requirements efficiently, i.e., with low channel resource consumption, which increases the capacity of 5G systems for mURLLC. Simulation results show that proper configuration of multicast mechanisms and the corresponding algorithms for mURLLC traffic can reduce resource consumption up to three times compared to the baseline solutions proposed for broadband multicast traffic, which significantly increases the system capacity. [ABSTRACT FROM AUTHOR]

Modern power systems present opportunities and challenges when integrating distributed generation and electric vehicle charging stations into unbalanced distribution networks. The performance and efficiency of both Distributed Generation (DG) and Electric Vehicle (EV) infrastructure are significantly affected by global temperature variation characteristics, which are taken into consideration in this study as it investigates the effects of these integrations. This scenario is further complicated by the unbalanced structure of distribution networks, which introduces inequalities that can enhance complexity and adverse effects. This paper analyzes the manner in which temperature changes influence the network operational voltage profile, power quality, energy losses, greenhouse harmful emissions, cost factor, and active and reactive power losses using analytical and heuristic techniques in the IEEE 69 bus network in both three-phase balance and modified unbalanced load conditions. In order to maximize adaptability and efficiency while minimizing the adverse impacts on the unbalanced distribution system, the findings demonstrate significant variables to take into account while locating the optimal location and size of DG and EV charging stations. To figure out the objective, three-phase distribution load flow is utilized by the particle swarm optimization technique. Greenhouse gas emissions dropped by 61.4%, 64.5%, and 60.98% in each of the three temperature case circumstances, while in the modified unbalanced condition, they dropped by 57.55%, 60.39%, and 62.79%. In balanced conditions, energy loss costs are reduced by 95.96%, 96.01%, and 96.05%, but in unbalanced conditions, they are reduced by 91.79%, 92.06%, and 92.46%. The outcomes provide valuable facts that electricity companies, decision-makers, along with other energy sector stakeholders may utilize to formulate strategies that adapt to the fluctuating patterns of electricity distribution during fluctuations in global temperature under balanced and unbalanced conditions of network. [ABSTRACT FROM AUTHOR]

Synchronous generator-based power stations, with their inherent inertia, can maintain frequency stability during sudden load switching, while distributed generating station-driven microgrids suffer from a lack of natural inertia. Cascaded power, voltage, and current controllers are a widespread control strategy used to regulate the power output of distributed generating stations to maintain frequency and voltage within stable limits. Virtual synchronous generator (VSG) control for the power controller is used as a potential solution to emulate inertia. To derive maximum benefit from VSG, proper tuning of its multiple parameters is required. In this direction, earlier works proposed the equivalence between the droop and VSG schemes, which suggested that the droop coefficient value could be directly used in the design of VSG. As an improvement to these conventional works, the proposed work in this paper identifies that VSG delivers a better response when an equalizing constant is used to adjust the droop coefficient value than using it directly. This paper proposes implementing the VSG with an equalizing constant as a new design parameter. A description of designing the parameters of this improved VSG considering the equalizing constant is also discussed in this paper. The performance of the conventional VSG and the proposed improved VSG are compared. From the results, it is observed that, at load switching, the output frequency of the proposed method in all test cases has settled at less than 3 s, while the conventional method took a maximum of 6 s in critical cases. Further, the output frequency's maximum peak with the proposed method is 3 Hz less than the conventional method. These, along with other metrics, validate the importance of the proposed improved VSG-based control scheme for the enhancement of transient responses in microgrids. [ABSTRACT FROM AUTHOR]

A terminal for remote control of charging stations for electric vehicles (EV) powered by renewable energy has been presented in this paper. This terminal enables remote control of EV chargers, smart batteries, smart electricity meters, fiscal cash registers (FCR), as well as remote control of renewable energy sources and other devices within the station. This terminal also makes charging stations more accessible to electric vehicles users, to electricity distribution companies, to electricity suppliers, to tax administrations, and finally to users and owners of charging stations. Therefore, communication and control with all these devices and systems is integrated in one device. Realization of hardware and software of such a terminal has also been described in this paper. The net result of development and commercialization of terminals would encourage an increase in the use of electric vehicles powered by energy from renewable sources, which would cause a decrease in the level of air pollution and all negative effects it causes in the future. Different categories of this device are considered. Moreover, although it is a device with embedded software, a very advanced method was used, that is, a model-driven development method, which enables fast and more efficient development and maintenance of the device. The results of the application of this method to the terminal for remote control of fiscal cash registers are provided. They were compared with the results of the development of the terminal for remote control of smart meters without applying this method. A simulation of the development of the terminal for remote control of the station is also provided. The presented method can be used in the future for faster and better-quality development of embedded software. [ABSTRACT FROM AUTHOR]

The significant growth in demand for electricity has led to increasing congestion on distribution networks. The challenge is twofold: it is needed to expand and modernize our grid to meet this increased demand but also to implement smart grid technologies to improve the efficiency and reliability of electricity distribution. In order to mitigate these congestions, novel approaches by using flexibility sources such as battery energy storage can be used. This involves the use of battery storage systems to absorb excess energy at times of low demand and release it at peak times, effectively balancing the load and reducing the stress on the grid. In this paper, two optimal power flow formulations are discussed: the branch flow model (non-convex) and the relaxed bus injection model (convex). These formulations determine the optimal operation of the flexibility sources, i.e., battery energy storage, with the objective of minimizing power losses while avoiding congestions. Furthermore, a comparison of the performance of these two formulations is performed, analyzing the objective function results and the flexibility operation. For this purpose, a real Spanish distribution network with its corresponding load data for seven days has been used. [ABSTRACT FROM AUTHOR]

The expansion of distributed renewable resources, together with increased demand from the electrification of transport and heating sectors, impacts distribution networks significantly. Additionally, the emergence of non-programmable and intermittent generators is set to diminish the dominance of traditional rotating and programmable generation, thereby affecting the overall stability of the system. Nevertheless, the flexibility offered by distributed resources has the potential to alleviate the necessity for network reinforcement and contribute to system stability at competitive costs. Local flexibility procurement should be rooted in local markets, serving as mechanisms to address distribution congestion and coordinate the provision of flexibility for transmission network services. The multitude of existing systems and the interdependence of flexibility services have given rise to diverse solutions, still undergoing experimentation in various countries. This paper aims to scrutinize key projects that have established local flexibility markets, delineating their fundamental characteristics, the most common solutions, identifying prevalent barriers and suggesting potential future improvements. The investigation focuses on the most uncertain aspects of local markets: possible TSO-DSO coordination schemes, the time horizon for the acquisition of services and the baseline definition methodologies. [ABSTRACT FROM AUTHOR]

It is widely recognised that improving the visibility and controllability of distributed energy resources (DERs) within electricity distribution networks will have significant benefits, particularly for the management of low-voltage (LV) and medium-voltage (MV) networks. Much work within the electricity distribution industry is currently focused on improving the visibility of DERs on LV networks. From a control-theoretic perspective, this enables closing the loop between the DER and the control room and enables a shift towards utilising data-driven model-based control strategies for DERs. The result is a system-wide performance that is closer to the theoretical optimal. In the Australian context, several jurisdictions are trialling techniques such as dynamic operating envelopes to enhance DER hosting capacity, using IEEE 2030.5-based architectures, with the implementation of distributed energy resource management (DERMS) systems at the enterprise level still quite limited. While there is significant activity focused on DER behaviour and control techniques by way of inverter grid codes and standards, the core issue of interoperability with distribution management systems (DMSs), market operators or participants, electric vehicles (EVs) or other DERs is still a work in progress. Importantly, this is also an impediment to realising distributed architectures for DER control in the grid. The unique characteristics of Australian distribution networks highlights several challenging problems for DER control and management. The objective of this paper is to provide a broad overview of DER control and management strategies in the Australian context, with an application focus on DER control in distribution network management. [ABSTRACT FROM AUTHOR]

Assessments of the hosting capacity of electricity distribution networks are of paramount importance, as they facilitate the seamless integration of rooftop photovoltaic systems into the grid, accelerating the transition towards a more carbon neutral and sustainable system. This paper employs a deep reinforcement learning-based approach to evaluate the real-time hosting capacity of low voltage distribution networks in a model-free manner. The proposed approach only requires real-time customer voltage data and solar irradiation data to provide a fast and accurate estimate of real-time hosting capacity at each customer connection point. This study addresses the imperative for accurate electrical models, which are frequently unavailable, in evaluating the hosting capacity of electricity distribution networks. To meet this challenge, the proposed approach utilizes a deep neural network-based, data-driven model of a low-voltage electricity distribution network. This proposed methodology incorporates model-free elements, enhancing its adaptability and robustness. In addition, a comparative analysis between model-based and model-free hosting capacity assessment methods is presented, highlighting their respective strengths and weaknesses. The utilization of the proposed hosting capacity estimation model enables distribution network service providers to make well-informed decisions regarding grid planning, leading to cost minimization. [ABSTRACT FROM AUTHOR]

With the development of EVs (Electric Vehicles) and the rapidly developing policies on low carbon and environmental protection, electric power systems and natural gas systems become increasingly larger. Under these circumstances, the V2G (Vehicle-to-grid) and the coordinated operation of an integrated electricity–gas distribution system (IEGDS), considering CO2 emissions, can play a part together in the process of energy conservation. Firstly, the V2G model is discussed; this paper presents the cost differences between out-of-order and order for the car. Secondly, the IEGDS model presents coupling constraints of gas turbines and power-to-gas. Lastly, carbon emission is considered in this paper; a carbon capture plant (CCP) captures the CO2 burning by fossil fuel in the power generation process and stores it in a carbon storage tank. This paper also considers trading with the carbon market via a carbon storage warehouse. With the cooperation of various components, a comprehensive model considers the use of V2G to store power in the IEGDS system, with consideration of the carbon trade. Numerical experiments validate the effectiveness of the combination between V2G and IEGDS, considering carbon emissions and carbon trading. [ABSTRACT FROM AUTHOR]

Clustering-based reactive voltage partitioning is successful in reducing grid cascading faults, by using clustering methods to categorize different power-consuming entities in the power grid into distinct regions. In reality, each power-consuming entity has different electrical characteristics. Additionally, due to the irregular and uneven distribution of the population, the distribution of electricity consumption is also irregular and uneven. However, the existing method neglects the electrical difference among each entity and the irregular and uneven density distribution of electricity consumption, resulting in poor accuracy and adaptability of these methods. To address these problems, an enhanced density peak model-based power grid reactive voltage partitioning method is proposed in this paper, called EDPVP. First, the power grid is modeled as a weighted reactive network to consider entity electrical differences. Second, the novel local density and density following distance are designed to enhance the density peak model to address the problem that the traditional density peak model cannot adapt to weighted networks. Finally, the enhanced density peak model is further equipped with an optimized cluster centers selection strategy and an updated remaining node assignment strategy, to better identify irregular and uneven density distribution of electricity consumption, and to achieve fast and accurate reactive voltage partition. Experiments on two real power grids demonstrate the effectiveness of the EDPVP. [ABSTRACT FROM AUTHOR]

In this paper, the problem of sizing and placement of constant and switching capacitors in electrical distribution systems is modelled considering the load uncertainty. This model is formulated as a multicriteria mathematical problem. The risk of voltage violation is calculated, and the stability index is modelled using fuzzy logic and fuzzy equations. The instability risk is introduced as the deviation of our fuzzy-based stability index with respect to the stability margin. The capacitor placement objectives in our paper include: (i) minimizing investment and installation costs as well as loss cost; (ii) reducing the risk of voltage violation; and (iii) reducing the instability risk. The proposed mathematical model is solved using a multi-objective version of a genetic algorithm. The model is implemented on a distribution network, and the results of the experiment are discussed. The impacts of constant and switching capacitors are assessed separately and concurrently. Moreover, the impact of uncertainty on the multi-objectives is determined based on a sensitivity analysis. It is demonstrated that the more the uncertainty is, the higher the system cost, the voltage risk and the instability risk are. [ABSTRACT FROM AUTHOR]

With the continuous development of renewable energy technologies, both domestically and internationally, the focus of energy research has gradually shifted towards renewable energy directions such as distributed photovoltaics and wind power. The penetration rate of renewable energy generation is constantly increasing, at the same time, the elements in the grid are becoming increasingly complex, and large-scale energy storage, as well as a variety of electricity loads such as electric vehicle charging piles and data centers are gradually appearing. Therefore, traditional distribution methods of the power grid are difficult to ensure the stable operation of the power system and cannot achieve efficient integration of renewable energy. Consequently, some scholars have proposed the concept of an energy internet. Compared to traditional power grids, the energy internet employs more comprehensive power electronics and communication technologies, enabling the interconnection of various new and traditional energy sources, and effectively integrating renewable energy. As the core device in the energy internet, the energy router plays a role in energy transformation and distribution, facilitating multi-information interconnection and multi-energy exchange within the energy internet. At the level of distribution network, the energy router can realize the efficient access of various forms of energy and the flexible control and management, which is of great significance for the optimal operation of distribution network. Against this backdrop, this paper reviews the development and current research status of energy routers, systematically analyzes the typical topologies and related control technologies of multi-port energy routers and summarizes and forecasts key issues and future development trends, aiming to provide thoughts and reference for subsequent related research. [ABSTRACT FROM AUTHOR]

In recent years, the increased distributed generation (DG) capacity in electric distribution systems has been observed. Therefore, it is necessary to research existing structures of distribution networks as well as to develop new (future) system structures. There are many works on the reliability of distribution systems with installed DG sources. This paper deals with a reliability analysis for both present and future medium voltage (MV) electric distribution system structures. The impact of DG technology used and energy source location on the power supply reliability has been analyzed. The reliability models of electrical power devices, conventional and renewable energy sources as well as information and communications technology (ICT) components have been proposed. Main contribution of this paper are the results of performed calculations, which have been analyzed for specific system structures (two typical present network structures and two future network structures), using detailed information on DG types, their locations and power capacities, as well as distribution system automation applied (automatic stand-by switching on—ASS and automatic power restoration—APR). The reliability of the smart grid consisting of the distribution network and the coupled communications network was simulated and assessed. The observations and conclusions based on calculation results have been made. More detailed modeling and consideration of system automation of distribution grids with DG units coupled with the communication systems allows the design and application of more reliable MV network structures. [ABSTRACT FROM AUTHOR]

Increasing connection rates of rooftop photovoltaic (PV) systems to electricity distribution networks has become a major concern for the distribution network service providers (DNSPs) due to the inability of existing network infrastructure to accommodate high levels of PV penetration while maintaining voltage regulation and other operational requirements. The solution to this dilemma is to undertake a hosting capacity (HC) study to identify the maximum penetration limit of rooftop PV generation and take necessary actions to enhance the HC of the network. This paper presents a comprehensive review of two topics: HC assessment strategies and reinforcement learning (RL)-based coordinated voltage control schemes. In this paper, the RL-based coordinated voltage control schemes are identified as a means to enhance the HC of electricity distribution networks. RL-based algorithms have been widely used in many power system applications in recent years due to their precise, efficient and model-free decision-making capabilities. A large portion of this paper is dedicated to reviewing RL concepts and recently published literature on RL-based coordinated voltage control schemes. A non-exhaustive classification of RL algorithms for voltage control is presented and key RL parameters for the voltage control problem are identified. Furthermore, critical challenges and risk factors of adopting RL-based methods for coordinated voltage control are discussed. [ABSTRACT FROM AUTHOR]

Distributed energy resources (DERs), such as photovoltaic (PV) sources, together with storage systems, such as battery energy storage systems (BESS), are increasingly present and necessary in our electricity distribution networks. Furthermore, the need for efficient use of energy from DERs, especially in developing countries and remote communities, must be addressed with the development of nanogrids (NGs), particularly DC NGs, and standalone PV systems with adequate control strategies. This paper investigates the control and dynamic operation of a standalone PV system. It consists mainly of three DC–DC power converters for the PV source interface, battery management, and load voltage control. A two-level modulation scheme is applied to each of these converters to switch them ON and OFF. A maximum power point tracking (MPPT) closed-loop voltage control system is implemented to make sure that the PV operates at optimum power regardless of the irradiance level or temperature, while battery voltage and load-side voltage control are also implemented to indirectly provide the required load power. The control of each of the converters is achieved by deriving their small-signal models using a state-space approach from which various control objectives are implemented. The DC-link is clamped by a BESS which acts as a backup source to provide power to the DC load in the absence of sufficient power from the PV panel. The dynamic operation of the whole system is enhanced by proposing a robust feedforward scheme that improves the response of the system in the presence of disturbances. The models are analyzed and implemented using PLECS, and numerical simulations are performed to validate the developed models and control schemes. [ABSTRACT FROM AUTHOR]

The paper deals with an optimization problem in an electricity distribution network with different types of distributed generation and a battery storage system in terms of a smart grid concept. The optimization problem considers two objectives, namely, the annual energy losses and the exchange of energy with the higher-level power grid. The decision variables of the problem are the allocation of the different distributed generation units and the battery storage system, the annual power profiles of the controllable distributed generation and the battery storage system, and the power factor profiles of the controllable and noncontrollable distributed generation. All decision variables are solved simultaneously in a single optimization problem. The variable load shapes of the grid consumers and the profiles of the photovoltaic and wind power systems are considered in the study. All data are observed at the annual level with hourly resolution. The problem solving method uses computational intelligence techniques, namely, metaheuristic optimization methods and artificial neural networks. The study proposes a framework for optimizing the decision variables in the planning phase of distributed generation and battery storage, and for controlling the variable power and power factor profiles based on an artificial neural network in the implementation phase. The optimization problem is solved with a power system simulation program and a metaheuristic optimizer in cosimulation synergy. The three cases of distributed generation and battery storage are considered simultaneously. The proposed method is applied to the test grid operator IEEE with 37 buses, and reductions in annual energy losses and energy exchange are obtained in the ranges 34–86% and 41–99%, respectively. [ABSTRACT FROM AUTHOR]

The quality of electricity is one of the most discussed issues in the regulatory context, structured by guidelines that allow the assessment of efficiency in electricity supply. Regarding electricity distribution systems, it is essential to highlight the aspects associated with the definition of continuity indicators to measure the service provided by the utilities. The parameters used to calculate the indicators are set by specific agencies in each country based on studies and their characteristics. With the growth in demand for electricity, debates associated with reducing greenhouse gas emissions in the atmosphere, and the increase in Distributed Energy Resources (DERs) connected to the grid, a new trend related to the energy supply is verified. Given these new scenarios, this paper presents a literature review in the regulatory field of existing distribution systems in South American countries. The research proposes to analyze, compare, and expose the current models to evaluate their methods and indicators, including a complete case study in Brazil. This paper seeks to illustrate and point out perspectives, challenges, and future perspectives through the collected and analyzed data. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to address an urgent operational issue referring to optimal power flow (OPF), which is associated with a number of technical and financial aspects relating to issues of environmental concern. In the last few decades, OPF has become one of the most significant issues in nonlinear optimization research. OPF generally improves the performance of electric power distribution, transmission, and production within the constraints of the control system. It is the purpose of an OPF to determine the most optimal way to run a power system. For the power system, OPFs can be created with a variety of financial and technical objectives. Based on these findings, this paper proposes the peafowl optimization algorithm (POA). A powerful meta-heuristic optimization algorithm inspired by collective foraging activities among peafowl swarms. By balancing local exploitation with worldwide exploration, the OPF is able to strike a balance between exploration and exploitation. In order to solve optimization problems involving OPF, using the standard IEEE 14-bus and 57-bus electrical network, a POA has been employed to find the optimal values of the control variables. Further, there are five study cases, namely, reducing fuel costs, real energy losses, voltage skew, fuel cost as well as reducing energy loss and voltage skew, and reducing fuel costs as well as reducing energy loss and voltage deviation, as well as reducing emissions costs. The use of these cases facilitates a fair and comprehensive evaluation of the superiority and effectiveness of POA in comparison with the coot optimization algorithm (COOT), golden jackal optimization algorithm (GJO), heap-based optimizer (HPO), leader slime mold algorithm (LSMA), reptile search algorithm (RSA), sand cat optimization algorithm (SCSO), and the skills optimization algorithm (SOA). Based on simulations, POA has been demonstrated to outperform its rivals, including COOT, GJO, HPO, LSMA, RSA, SCSO, and SOA. In addition, the results indicate that POA is capable of identifying the most appropriate worldwide solutions. It is also successfully investigating preferred search locations, ensuring a fast convergence speed and enhancing the search engine's capabilities. [ABSTRACT FROM AUTHOR]

Electrical power distribution is the most important division in the power supply chain. However, its sustainability in terms of efficiency is very important for the growth of every country. This main objective of the paper is to assess the productivity dynamics of this process using the data envelopment analysis (DEA) methodology to analyse the effectiveness of the electricity distribution regions (EDRs) over a period of 7 years. The paper adapts the biennial Malmquist productivity index by infusing it with the slacks-based measure (SBM) to assess the productivity dynamics of EDRs in Ghana. Productivity dynamics were assessed by decomposing the SBM-BMPI productivity scores into the efficiency, technology, and scale change. It was discovered that the productivity of EDRs in Ghana progressed by 16.23% per annum over the sample period. Productivity was driven mainly by technological change and not the efficiency changes and scale changes. [ABSTRACT FROM AUTHOR]

Transformer failures have a significant cost impact on the operation of an electrical network. In many utilities, transformers have been operating for many years past their expected usable life. As power demand has surged, transformers in some areas are being loaded beyond their rated capacity to meet the demand. One of the vital components in a transformer is the on-load tap changer (OLTC), which regulates the voltage in the distribution network. This study aims to review several condition-monitoring techniques (online and offline) that can monitor the health of the OLTC and assure the safety of the transformer's OLTC from irreparable damage by detecting the defect at an earlier stage, which is preceded by the specification of typical faults. This paper also discussed the common faults of the OLTC and the root causes of these faults. The OLTC is prone to mechanical faults due to its frequently changing mechanism in the tap operation. The OLTC are also prone to oil as well as thermal faults. As a result, it is critical to monitor OLTC conditions while they are in use. Proper management of condition monitoring (CM) for the OLTC is useful and necessary to increase availability and achieve optimised operating. Condition monitoring (CM) and diagnostics methods (DM) have been developing since the 1950s. CM and DM have been implemented to diagnose and detect an incipient fault, especially for the OLTC. Many techniques, online and offline, are being used to monitor the condition of the OLTC to prevent failure and minimize outages. These DM and CM will prolong the operational cycle and avoid a major disaster for the OLTC, which is an unfavorable scenario. [ABSTRACT FROM AUTHOR]

The use of information technology and the automation of control systems in the energy sector enables a more efficient transmission and distribution of electricity. However, in addition to the many benefits that the deployment of intelligent and largely autonomous systems brings, it also carries risks associated with information and cyber security breaches. Technology systems form a specific and critical communication infrastructure, in which powerful control elements integrating IoT principles and IED devices are present. It also contains intelligent access control systems such as RTU, IDE, HMI, and SCADA systems that provide communication with the data and control center on the outer perimeter. Therefore, the key question is how to comprehensively protect these specialized systems and how to approach security implementation projects in this area. To establish rules, procedures, and techniques to ensure the cyber security of smart grid control systems in the energy sector, it is necessary to understand the security threats and bring appropriate measures to ensure the security of energy distribution. Given the use of a wide range of information and industrial technologies, it is difficult to protect energy distribution systems using standard constraints to protect common IT technologies and business processes. Therefore, as part of a comprehensive approach to cyber security, specifics such as legislative framework, technological constraints, international standards, specialized protocols or company processes, and many others need to be considered. Therefore, the key question is how to comprehensively protect these specialized systems and how to approach security implementation projects in this area. In this article, a basic security concept for control systems of power stations, which are part of the power transmission and distribution system, is presented based on the Smart Grid domain model with emphasis on substation intelligence, according to the Purdue model. The main contribution of the paper is the comprehensive design of mitigation measures divided into mandatory and recommended implementation based on the standards defined within the MITRE ATT&CK matrix specified, concerning the specifications of intelligent distribution substations. The proposed and industry-tested solution is mapped to meet the international security standards ISO 27001 and national legislation reflecting the requirements of NIS2. This ensures that the security requirements will be met when implementing the proposed Security Baseline. [ABSTRACT FROM AUTHOR]

This paper examines the role of demand response aggregators in minimizing the cost of electricity generation by distribution utilities in a day-ahead electricity market. In this paper, 2500 standard South African homes are considered as end users. Five clusters (and aggregators) are considered with 500 homes in each cluster. Two cases are analysed: (1) Utilization of renewable energy sources (RES) is implemented by the distribution supply operator (DSO), where it meets excess demand for end users during peak hours by purchasing electricity from the renewable sources of the energy market, and (2) Utilization of RES is implemented by end users alone, and it is assumed that every household has one plug-in electric vehicle (PEV). The aggregators then compete with each other for the most cost-effective energy usage profile; the aggregator with the least energy demand wins the bid. In both cases, energy pricing is estimated according to the day-ahead energy market. A typical day during winter in Johannesburg is considered for the simulation using a genetic algorithm (GA). Results obtained demonstrate the effectiveness of demand response aggregators in maximizing the benefits on both sides of the electricity supply chain. [ABSTRACT FROM AUTHOR]

A DC cable short-circuit fault is the most severe fault type that occurs in DC distribution networks, having a negative impact on transmission equipment and the stability of system operation. When a short-circuit fault occurs in a DC distribution network based on a voltage source converter (VSC), an in-depth analysis and characterization of the fault is of great significance to establish relay protection, devise fault current limiters and realize fault location. However, research on short-circuit faults in VSC-based low-voltage DC (LVDC) systems, which are greatly different from high-voltage DC (HVDC) systems, is currently stagnant. The existing research in this area is not conclusive, with further study required to explain findings in HVDC systems that do not fit with simulated results or lack thorough theoretical analyses. In this paper, faults are divided into transient- and steady-state faults, and detailed formulas are provided. A more thorough and practical theoretical analysis with fewer errors can be used to develop protection schemes and short-circuit fault locations based on transient- and steady-state analytic formulas. Compared to the classical methods, the fault analyses in this paper provide more accurate computed results of fault current. Thus, the fault location method can rapidly evaluate the distance between the fault and converter. The analyses of error increase and an improved handshaking method coordinating with the proposed location method are presented. [ABSTRACT FROM AUTHOR]

Optimal operation of the active distribution networks (ADN) is essential to keep its safety, reliability and economy. With the integration of multiple controllable resources, the distribution networks are facing more challenges in which the optimization strategy is the key. This paper establishes the optimal operation model of the ADN considering a diversity of controllable resources including energy storage devices, distributed generators, voltage regulators and switchable capacitor banks. The objective functions contain reducing the power losses and improving the voltage profiles. To solve the optimization problem, the Kriging model based Improved Surrogate Optimization-Mixed-Integer (ISO-MI) algorithm is proposed in this paper. The Kriging model is applied to approximate the complicated distribution networks, which speeds up the solving process. Finally, the accuracy of the Kriging model is validated and the efficiency among the proposed method, genetic algorithm (GA) and particle swarm optimization (PSO) is compared in an unbalanced IEEE-123 nodes test feeder. The results demonstrate that the proposed method has better performance than GA and PSO. [ABSTRACT FROM AUTHOR]

As the adoption of distributed energy resources (DERs) grows, the future of electricity distribution systems is confronted with significant challenges. These challenges arise from the transformation of consumers into prosumers and the resulting increased system complexity, leading to more pressure on the distribution grids. To address this complexity, a Digital Twin framework is designed to simulate DERs within distribution grids effectively. This framework is structured around four key modules: DERs, the electricity distribution grid, the energy management system, and the consumers. It incorporates a communication interface to facilitate interactions among these modules and includes considerations for grid topologies and demand-side configurations. The framework allows for the exploration of various DER adoption rates and capacities. The validation of this framework involves case studies on two Danish distribution grids with scenarios incorporating rooftop photovoltaic (PV) systems, batteries, and electric vehicles, considering different combinations of these technologies. The findings demonstrate the framework's ability to depict the states of the grid, PV systems, electric vehicles, and battery systems with a 10 min resolution over periods ranging from a day to over a decade. [ABSTRACT FROM AUTHOR]

The transition to Electric Vehicles (EV) in place of traditional internal combustion engines is increasing societal demand for electricity. The ability to integrate the additional demand from EV charging into forecasting electricity demand is critical for maintaining the reliability of electricity generation and distribution. Load forecasting studies typically exclude households with home EV charging, focusing on offices, schools, and public charging stations. Moreover, they provide point forecasts which do not offer information about prediction uncertainty. Consequently, this paper proposes the Long Short-Term Memory Bayesian Neural Networks (LSTM-BNNs) for household load forecasting in presence of EV charging. The approach takes advantage of the LSTM model to capture the time dependencies and uses the dropout layer with Bayesian inference to generate prediction intervals. Results show that the proposed LSTM-BNNs achieve accuracy similar to point forecasts with the advantage of prediction intervals. Moreover, the impact of lockdowns related to the COVID-19 pandemic on the load forecasting model is examined, and the analysis shows that there is no major change in the model performance as, for the considered households, the randomness of the EV charging outweighs the change due to pandemic. [ABSTRACT FROM AUTHOR]

The move towards renewable energy and technological advancements in the generation, distribution and transmission of electricity have increased the popularity of microgrids. The popularity of these decentralised applications has coincided with advancements in the field of telecommunications allowing for the efficient implementation of these applications. This convenience has, however, also coincided with an increase in the attack surface of these systems, resulting in an increase in the number of cyber-attacks against them. Preventative network security mechanisms alone are not enough to protect these systems as a critical design feature is system resilience, so intrusion detection and prevention system are required. The practical consideration for the implementation of the proposed schemes in practice is, however, neglected in the literature. This paper attempts to address this by generalising these considerations and using the lessons learned from water distribution systems as a case study. It was found that the considerations are similar irrespective of the application environment even though context-specific information is a requirement for effective deployment. [ABSTRACT FROM AUTHOR]

Reliability is an important issue in electricity distribution systems, with strict regulatory policies and investments needed to improve it. This paper presents a mixed integer linear programming (MILP) model for clustering electrical customers, maximizing system reliability and minimizing outage costs. However, the evaluation of reliability and its corresponding nonlinear function represent a significant challenge, making the use of mathematical programming models difficult. The proposed heuristic procedure overcomes this challenge by using a linear formulation of reliability indicators and incorporating them into the MILP model for clustering electrical customers. The model is mainly defined on a density-based heuristic that constrains the set of possible medians, thus dealing with the combinatorial complexity associated with the problem of empowered p-medians. The proposed model proved to be effective in improving the reliability of real electrical distribution systems and reducing compensation costs. Three substation cluster scenarios were explored, in which the total utility compensations were reduced by approximately USD 86,000 (1.80%), USD 67,400 (1.41%), and USD 64,000 (1.3%). The solutions suggest a direct relationship between the reduction in the compensation costs and the system reliability. In addition, the alternative modeling approach to the problem served to match the performance between the distribution system reliability indicators. [ABSTRACT FROM AUTHOR]

The 2022 United Nations Climate Change Conference (COP27) recommended that Egypt be converted to green energy, in addition to increasing the demand for annual energy consumption, which will lead to an increase in the use of renewable energy sources (RES) in Egypt. The Egyptian Ministry of Energy and Electricity plans to build RES (photovoltaic systems and wind farms) connected to the Egyptian power system (EPS). It is a defect to choose the position and size of the RES based on only power calculations because the RES is an intermittent source. This paper presents a modified analytical energy technique for locating RES in IEEE 33-bus and 69-bus distribution networks and a realistic 25-bus 500 kV EPS. An analytical multi-objective function has been developed to determine the optimal locations of DGs or RESs based on power losses and annual energy loss calculations of the system depending on weather conditions. The efficiency and feasibility of the proposed algorithm based on the IEEE 33-bus and 69-bus distribution networks and the realistic 25-bus 500 kV EPS have been tested and compared with PSO and GA. The impact of RESs on the performance of the 25-bus 500 kV EPS has been investigated based on annual energy losses and operation stability depending on weather conditions. The results showed that the proposed technique used these effective values to obtain optimal weather-adjusted locations. The optimal locations of PV systems or wind systems based on energy calculation improved the voltage profile better than power calculation by about 2%, and the annual energy losses decreased by about 7%. The performance of the 25-bus 500 kV EPS, due to the addition of RES, resulted in a decrease in the annual energy losses of 47% and an improvement in the voltage profile and system stability. [ABSTRACT FROM AUTHOR]

Smart metering systems development and implementation in power distribution networks can be seen as an important factor that led to a major technological upgrade and one of the first steps in the transition to smart grids. Besides their main function of power consumption metering, as is demonstrated in this work, the extended implementation of smart metering can be used to support many other important functions in the electricity distribution grid. The present paper proposes a new solution that uses a frequency feature-based method of data time-series provided by the smart metering system to estimate the energy contour at distribution level with the aim of improving the quality of the electricity supply service, of reducing the operational costs and improving the quality of electricity measurement and billing services. The main benefit of this approach is determining future energy demand for optimal energy flow in the utility grid, with the main aims of the best long term energy production and acquisition planning, which lead to lowering energy acquisition costs, optimal capacity planning and real-time adaptation to the unpredicted internal or external electricity distribution branch grid demand changes. Additionally, a contribution to better energy production planning, which is a must for future power networks that benefit from an important renewable energy contribution, is intended. The proposed methodology is validated through a case study based on data supplied by a real power grid from a medium sized populated European region that has both economic usage of electricity—industrial or commercial—and household consumption. The analysis performed in the proposed case study reveals the possibility of accurate energy contour forecasting with an acceptable maximum error. Commonly, an error of 1% was obtained and in the case of the exceptional events considered, a maximum 15% error resulted. [ABSTRACT FROM AUTHOR]

This paper shows an experimental application case to convert a part of the grid formed by renewable generation sources, storage systems, and loads into a smart microgrid. This transformation will achieve greater efficiency and autonomy in its management. If we add to this the analysis of all the data that has been recorded and the correct management of the energy produced and stored, we can achieve a reduction in the electricity consumption of the distribution grid and, with this, a reduction in the associated bill. To achieve this transformation in the grid, we must provide it with intelligence. To achieve this, a four steps procedure are proposed: identification and description of the elements, integration of the elements in the same data network, establishing communication between the elements and the control system, creating an interface that allows control of the entire network. The microgrid of CEDER-CIEMAT (Renewable Energy Centre in Soria, Spain) is presented as a real case study. This centre is made up of various sources of generation, storage, and consumption. All the elements that make up the microgrid are incorporated into free software, Home Assistant, allowing real-time control and monitoring of all of them thanks to the intelligence that has been provided to the grid. The novelty of this paper is that it describes a procedure that is not reported in the current literature and that, being developed with Home Assistant, is free and allows the control and management of a microgrid from any device (mobile, PC) and from any place, even though not on the same data network as the microgrid. [ABSTRACT FROM AUTHOR]

This paper presents the implementation of the mono-objective Switch Allocation Problem (SAP) optimization model for electric power distribution networks, considering the equivalent interruption duration per consumer unit EIDCU and non-distributed energy END reliability indexes. We use the current summation algorithm to solve the power flow, and we employ an intelligent bee colony algorithm to solve the model. Two network topologies, one with 43 and another with 136 bars, adapted from the literature, are used to illustrate the solution. Results show a significant reduction in the financial cost of planning a power distribution network. [ABSTRACT FROM AUTHOR]

An electric power distribution utility is responsible for providing energy to consumers in a continuous and stable way. Failures in the electrical power system reduce the reliability indexes of the grid, directly harming its performance. For this reason, there is a need for failure prediction to reestablish power in the shortest possible time. Considering an evaluation of the number of failures over time, this paper proposes performing failure prediction during the first year of the pandemic in Brazil (2020) to verify the feasibility of using time series forecasting models for fault prediction. The long short-term memory (LSTM) model will be evaluated to obtain a forecast result that an electric power utility can use to organize maintenance teams. The wavelet transform has shown itself to be promising in improving the predictive ability of LSTM, making the wavelet LSTM model suitable for the study at hand. The assessments show that the proposed approach has better results regarding the error in prediction and has robustness when statistical analysis is performed. [ABSTRACT FROM AUTHOR]

During the ongoing evolution of energy systems toward increasingly flexible, resilient, and digitalized distribution systems, many issues need to be developed. In general, a holistic multi-level systemic view is required on the future enabling technologies, control and management methods, operation and planning principles, regulation as well as market and business models. Increasing integration of intermittent renewable generation and electric vehicles, as well as industry electrification during the evolution, requires a huge amount of flexibility services at multiple time scales and from different voltage levels, resources, and sectors. Active use of distribution network-connected flexible energy resources for flexibility services provision through new marketplaces will also be needed. Therefore, increased collaboration between system operators in operation and planning of the future power system will also become essential during the evolution. In addition, use of integrated cyber-secure, resilient, cost-efficient, and advanced communication technologies and solutions will be of key importance. This paper describes a potential three-stage evolution path toward fully flexible, resilient, and digitalized electricity distribution networks. A special focus of this paper is the evolution and development of adaptive control and management methods as well as compatible collaborative market schemes that can enable the improved provision of flexibility services by distribution network-connected flexible energy resources for local (distribution system operator) and system-wide (transmission system operator) needs. [ABSTRACT FROM AUTHOR]

Growing home comfort is causing increasing energy consumption in residential buildings and a consequent stress in urban medium and low voltage distribution networks. Therefore, distribution system operators are obliged to manage problems related to the reliability of the electricity system and, above all, they must consider investments for enhancing the electrical infrastructure. The purpose of this paper is to assess how the reduction of building electricity consumption and the modification of the building load profile, due to load automation, combined with suitable load control programs, can improve network reliability and distribution efficiency. This paper proposes an extensive study on this issue, considering various operating scenarios with four load control programs with different purposes, the presence/absence of local generation connected to the buildings and different external thermal conditions. The study also highlights how different climatic conditions can influence the effects of the load control logics. [ABSTRACT FROM AUTHOR]

This paper presents a robust nonlinear integrated controller to improve stability of hybrid AC/DC micro-grids under islanding mode. The proposed controller includes two independent controllers where each one is responsible to control one part of the system. First controller will improve the stability of input DC/DC converter. Using this controller, the voltage of DC bus is fully stabilized such that when a large disturbance occurs, its voltage will become constant without any significant dynamic. The necessity of DC bus regulation which has not been considered in previous studies, is imminent as it not only improves voltage stability of the micro-grid but also protects consumers which are directly connected to the DC bus, against voltage variations. Frequency stability of the micro-grid is provided by the second proposed controller which is applied to output DC/AC converter of the micro-grid. Adaptive method is used to make the controllers proposed in this paper, robust. Duty cycle of converters switches are adjusted such that voltage and frequency of the micro-grid are set on the desired value in minimum possible time under transient disturbances and uncertainty of the loads as well as micro-sources characteristics. [ABSTRACT FROM AUTHOR]

The imbalance between the supply and demand of electricity is becoming expansive due to the increase in renewable energy penetration. Consequently, the time-varying electricity price is proposed as a tool to manage the mismatch. To cope with the electricity price difference across time and to extract the benefit to the limit, an energy storage system (ESS) can be a good tool to smooth out electricity usage. Nevertheless, ESS can be expensive due to the high installation cost and centrally managed system. In this paper, we propose a distributed ESS installed in each home appliance. Separately installed batteries can avoid sizeable initial investment costs. We calculated the benefit of the system that mainly stemmed from the electricity price difference and compared the benefits across various sizes of the battery system. In addition, the charging/discharging schedule depends on the power consumption profile and electricity price distribution. Decreasing battery prices and rising electricity price volatility can increase the system's potential benefit. [ABSTRACT FROM AUTHOR]

The annual electricity trade scheduling is the basis of long-term power generation scheduling. In recent decades, the ratio of new energy generation in China has increased annually, and the electricity market has operated under the "market electricity" and "planned electricity" double track mode in recent years. However, the existing annual electricity trade scheduling methods are extensive and cannot adapt to the new situation of "market electricity" and large-scale new energy generation. The annual scheduled energy of the power units is set as a decision variable, and a novel annual energy scheduling optimization model based on Gini coefficient of fairness is presented in this paper. In this model, "market electricity" capacity is conversed monthly, considering peaking reserve demand and monthly characteristics of new energy generation. The fairness constraint set based on Gini coefficient is introduced into the optimization model to solve various fairness problems. Simulation results show that the introduction of the Gini coefficient and the optimization model considering the monthly conversion of marketing electricity capacity can obtain more accurate and reasonable electricity distribution results, and the peaking demand can be considered more fairly and effectively. The proposed method provides a feasible solution to the annual electric energy scheduling for dual-track operation country such as China. [ABSTRACT FROM AUTHOR]

Voltage control in modern electric power distribution systems has become challenging due to the increasing penetration of distributed energy resources (DER). The current state-of-the-art voltage control is based on static/pre-determined DER volt-var curves. Static volt-var curves do not provide sufficient flexibility to address the temporal and spatial aspects of the voltage control problem in a power system with a large number of DER. This paper presents a simple, scalable, and robust distributed optimization framework (DOF) for optimizing voltage control. The proposed framework allows for data-driven distributed voltage optimization in a power distribution system. This method enhances voltage control by optimizing volt-var curve parameters of inverters in a distributed manner based on a cellular computational network (CCN) representation of the power distribution system. The cellular optimization approach enables the system-wide optimization. The cells to be optimized may be prioritized and two methods namely, graph and impact-based methods, are studied. The impact-based method requires extra initial computational efforts but thereafter provides better computational throughput than the graph-based method. The DOF is illustrated on a modified standard distribution test case with several DERs. The results from the test case demonstrate that the DOF based volt-var optimization results in consistently better performance than the state-of-the-art volt-var control. [ABSTRACT FROM AUTHOR]

Smart grids integrate modern Internet of Things technologies with the traditional grid systems, aiming to achieve effective and reliable electricity distribution as well as promote clean energy development. Nowadays, it is an indispensable infrastructure for smart homes, wisdom medical, intelligent transportation, and various other services. However, when smart meters transmit users' power consumption data to the control center, sensitive information may be leaked or tampered. Moreover, distributed architecture, fine-grained access control, and user anonymity are also desirable in real-world applications. In this paper, we propose a privacy-preserving data aggregation scheme for a smart grid with user anonymity and designated recipients. Smart meters collect users' power consumption data, encrypt it using homomorphic re-encryption, and then transmit the ciphertexts anonymously. Afterward, proxies re-encrypt the aggregated data in a distributed fashion so that only the designated recipients can decrypt it. Therefore, our proposed scheme provides a more secure and flexible solution for privacy-preserving data aggregation in smart grids. Security analyses prove that our scheme achieves all the above-mentioned security requirements, and efficiency analyses demonstrate that it is efficient and suitable for real-world applications. [ABSTRACT FROM AUTHOR]

In today's social, economic, and political reality, it cannot be overlooked that the energy self-sufficiency of municipalities not only optimizes the lives of the inhabitants of the municipality but also, in a broader perspective, the services provided by the municipality. The sustainable development of a municipality will therefore depend on its degree of self-reliance and self-sufficiency. Economic and technological considerations are not sufficient for the municipality to achieve optimal energy independence without normative conditions. The current (2021/2022) trends in electricity prices and in the development of national and international policies and strategies for electricity generation from renewable energy sources also make the change in the energy market structure toward distributed generation. The main objective of this paper is a theoretical analysis of the legal solutions in force in Poland that allow building energy self-sufficiency in municipalities and their adequacy to the current economic, technological, and political conditions. The scientific discussion will focus here on research problems related to the impact of the national regulations on the gradual assumption of control by municipalities over the generation and distribution of electricity with regard to energy produced in RES installations and the independence of municipalities from the national energy management and supply system. [ABSTRACT FROM AUTHOR]

This paper deals with the estimation of the energy production by means of pumps used as turbines to exploit residual hydraulic energy, as in the case of available head and flow rate in water distribution networks. To this aim, four pumps with different characteristics are investigated to estimate the producible yearly electric energy. The performance curves of Pumps As Turbines (PATs), which relate head, power, and efficiency to the volume flow rate over the entire PAT operation range, were derived by using published experimental data. The four considered water distribution networks, for which experimental data taken during one year were available, are characterized by significantly different hydraulic features (average flow rate in the range 10-116 L/s; average pressure reduction in the range 12-53 m). Therefore, energy production accounts for actual flow rate and head variability over the year. The conversion efficiency is also estimated, for both the whole water distribution network and the PAT alone. [ABSTRACT FROM AUTHOR]

The free-piston engine generator (FPEG) is a novel power generation device with an estimated brake efficiency (energy contained in the fuel that is transformed into useful work) of up to 46%, compared to the 25-35% reported in conventional reciprocating engines. This paper seeks to address a major challenge in the development of new and complex technologies--how do we effectively communicate and understand the influence of key design parameters on its operating performance? In this paper, the FPEG is described using a simple numerical model, a model which is reduced to a forced mass-spring vibration system under external excitation, enabling all the major input parameters to be decoupled. It proved that the engine piston position as a function of time and output power could be predicted directly from the input parameters with acceptable accuracy. The influence of the key FPEG design parameters on the piston oscillation characteristics and electric power output can be characterised with respect to one another and summarised. Key design parameters include piston mass, compression stroke length, piston cross sectional area, and electric load. Compared with previous and more complex numerical models, the presented methods can be used to simply describe the sensitivity of key design parameters on the FPEG performance. It will provide useful general guidance for the FPEG hardware design process. [ABSTRACT FROM AUTHOR]

The battery capacity of electric buses (EB) used for public transportation is greater than that of electric cars, and the charging power is also several times greater than that used in electric cars; this can result in high energy consumption and negatively impact power distribution networks. This paper proposes a framework to determine the optimal contracted power capacity and charging schedule of an EB charging station in such a way that energy costs can be reduced. A mathematical model of controlled charging, which includes the capacity and energy charges of the station, was developed to minimize costs. The constraints of the model include the charging characteristics of an EB and the operational guidelines of the bus company. A practical EB charging station was used to verify the proposed model. The financial viability of this EB charging station is also studied in this paper. The economic analysis model for this charging station considers investment and operational costs, and the operational revenue. Sensitivity analyses with respect to some key parameters are also performed in this paper. Based on actual operational routes and EB charging schemes, test results indicate that the EB charging station investment is feasible, and the planning model proposed can be used to determine optimal station power capacity and minimize energy costs. [ABSTRACT FROM AUTHOR]

This paper presents an optimal cooperative voltage control approach, which coordinates storage units in a distribution network. This technique is developed for storage systems' active power management with a local strategy to provide robust voltage control and a distributed strategy to deliver optimal storage utilization. Accordingly, three control criteria based on predefined node voltage limits are used for network operation including normal, over-voltage, and under-voltage control modes. The contribution of storage units for voltage support is determined using the control modes and the coordination strategies proposed in this paper. This technique is evaluated in two case studies to assess its capability. [ABSTRACT FROM AUTHOR]

Electricity theft is one of the challenging problems in smart grids. The power utilities around the globe face huge economic loss due to ET. The traditional electricity theft detection (ETD) models confront several challenges, such as highly imbalance distribution of electricity consumption data, curse of dimensionality and inevitable effects of non-malicious factors. To cope with the aforementioned concerns, this paper presents a novel ETD strategy for smart grids based on theft attacks, long short-term memory (LSTM) and gated recurrent unit (GRU) called TLGRU. It includes three subunits: (1) synthetic theft attacks based data balancing, (2) LSTM based feature extraction, and (3) GRU based theft classification. GRU is used for drift identification. It stores and extracts the long-term dependency in the power consumption data. It is beneficial for drift identification. In this way, a minimum false positive rate (FPR) is obtained. Moreover, dropout regularization and Adam optimizer are added in GRU for tackling overfitting and trapping model in the local minima, respectively. The proposed TLGRU model uses the realistic EC profiles of the Chinese power utility state grid corporation of China for analysis and to solve the ETD problem. From the simulation results, it is exhibited that 1% FPR, 97.96% precision, 91.56% accuracy, and 91.68% area under curve for ETD are obtained by the proposed model. The proposed model outperforms the existing models in terms of ETD. [ABSTRACT FROM AUTHOR]