Search

Drought monitoring and early detection have improved greatly in recent decades through the development and refinement of numerous indices and indicators. However, a lack of guidance, based on user experience, exists as to which drought-monitoring tools are most appropriate in a given location. This review paper summarizes the results of targeted user engagement and the published literature to improve the understanding of drought across North America and to enhance the utility of drought-monitoring tools. Workshops and surveys were used to assess and make general conclusions about the perceived performance of drought indicators, indices and impact information used for monitoring drought in the five main Köppen climate types (Tropical, Temperate, Continental, Polar Tundra, Dry) found across Canada, Mexico, and the United States. In Tropical, humid Temperate, and southerly Continental climates, droughts are perceived to be more short-term (less than 6 months) in duration rather than long-term (more than 6 months). In Polar Tundra climates, Dry climates, Temperate climates with dry warm seasons, and northerly Continental climates, droughts are perceived to be more long-term than short-term. In general, agricultural and hydrological droughts were considered to be the most important drought types. Drought impacts related to agriculture, water supply, ecosystem, and human health were rated to be of greatest importance. Users identified the most effective indices and indicators for monitoring drought across North America to be the U.S. Drought Monitor (USDM) and Standardized Precipitation Index (SPI) (or another measure of precipitation anomaly), followed by the Normalized Difference Vegetation Index (NDVI) (or another satellite-observed vegetation index), temperature anomalies, crop status, soil moisture, streamflow, reservoir storage, water use (demand), and reported drought impacts. Users also noted the importance of indices that measure evapotranspiration, evaporative demand, and snow water content. Drought indices and indicators were generally thought to perform equally well across seasons in Tropical and colder Continental climates, but their performance was perceived to vary seasonally in Dry, Temperate, Polar Tundra, and warmer Continental climates, with improved performance during warm and wet times of the year. The drought indices and indicators, in general, were not perceived to perform equally well across geographies. This review paper provides guidance on when (time of year) and where (climate zone) the more popular drought indices and indicators should be used. The paper concludes by noting the importance of understanding how drought, its impacts, and its indicators are changing over time as the climate warms and by recommending ways to strengthen the use of indices and indicators in drought decision making. [ABSTRACT FROM AUTHOR]

There have been fruitful publications on thermal comfort of urban residential buildings in China. However, there is a lack of reviews on this topic to perform a comprehensive analysis and find opportunities to meet occupants' thermal comfort needs while improving building energy efficiencies. This paper addresses this issue by presenting a systematic review on the advancements in research on thermal comfort in urban residential buildings in China. Firstly, two common thermal comfort research approaches, i.e., field studies and laboratory studies, are discussed. Secondly, eleven main thermal comfort evaluation indicators are summarized. Finally, this paper analyzes the thermal comfort survey data from different researchers, discusses the impacts of adaptive behaviors on human thermal comfort, and provides recommendations for future research on urban residential thermal comfort. It was found that people have higher and higher requirements for their indoor thermal environment as time goes by, especially in the winter; the thermoneutral temperature is higher in warmer climate regions in the summer but lower in the winter than in colder climate regions; the thermoneutral temperature tends to increase with the indoor air temperature due to an adaptation to the indoor thermal environment. The outcomes of this paper provide valuable information on thermal comfort behaviors of urban residents in different climate zones in China, which can serve as a resource for the academic community conducting future research on thermal comfort and assist policymakers in enhancing building energy efficiencies without compromising the occupants' comfort. [ABSTRACT FROM AUTHOR]

Ecuador is a country with several climate zones. However, their behaviour is similar throughout the year, with no peaks of extreme temperatures in the various seasons. This paper is a first approach to study the adaptive comfort behaviour in several areas and populations of the country. Considering the ASHRAE 55-2020 model, energy simulation programmes are applied not just to the current climate scenario but also to the climate change scenarios of 2050 and 2100. The results of locations are analysed and compared to determine their performance. Thanks to their climate characteristics, adaptive comfort models could be applied as a passive strategy, using natural ventilation for building indoor comfort improvement, particularly social dwellings. According to previous studies, some prototypes have not considered the climate determinants in each region. Given the geographic situation of the study areas, the adaptive comfort model could be applied in all cases. Percentages of application of natural ventilation and heating and cooling degree hours have similar behaviours according to the climatic region, with a variation greater than 30% among them. [ABSTRACT FROM AUTHOR]

Simple Summary: The Mediterranean fruit fly, Ceratitis capitata, is considered one of the world's most damaging pests, able to infest the fruits of over 300 plant species and adapt to a wide range of climatic zones. It can attack commercially important fruits and losses caused by this pest can be enormous without appropriate control measures. To contribute to the management of Mediterranean fruit fly infestations, in the present paper, we report the effectiveness of commercially available trapping devices (Decis Trap, Tephri Trap Ecological and Conetrap) baited with two types of female attractants (Econex Trypack and Biodelear). The performance of trapping devices was evaluated in semi-field cages in different thermal conditions. Our results showed that the Tephri Trap baited with Trypack or Biodelear and the Decis Trap reported the same performance in capturing females and could all be used for medfly mass trapping. The mass trapping technique can be considered an eco-friendly method to use in combination with other control systems. The Mediterranean fruit fly (medfly), Ceratitis capitata, is a key pest of fruit crops in a wide range of climatic zone. Its economic importance is increasing due to its invasion and establishment in new geographical areas caused by global warming. Generally, the management of medfly infestation has been carried out with the use of synthetic pyrethroids and phosphorganic insecticides. Other containment approaches include attract-and-kill, biological control, and the sterile insect technique. The mass trapping technique can be considered an eco-friendly method to use in combination with other control systems. The present study reported the trapping effectiveness of commercially available devices (Decis Trap, Tephri Trap Ecological, and Conetrap) baited with different types of female attractants (Econex Trypack and Biodelear) under different thermal conditions. The performance of trapping systems was evaluated in semi-field cages. Our results showed that the combination of Conetrap with Biodelear was not proven effective, while the Tephri Trap baited with Trypack or Biodelear and the Decis Trap reported the same performance in capturing females and could be used for medfly mass trapping. [ABSTRACT FROM AUTHOR]

This document discusses the impact of climate change on salmonid fishes in rivers. Climate warming poses a serious threat to these cold-adapted ectotherms, leading to population declines, genetic and phenotypic changes, and alterations in behavior, physiology, and distribution. Climate change also affects habitats, including flow regimes, vegetation, oxygen concentration, and water turbidity. The document highlights the importance of understanding these alterations to improve habitat and population management. It also provides insights into the effects of temperature on metabolic rates, genetic diversity, transcriptome, migration patterns, river flow, growth, and predator-prey interactions. The document concludes with a literature review on climate impacts on Pacific and Atlantic salmon, offering guidance for stakeholders, managers, and researchers. [Extracted from the article]

This article investigates the impact of temperature regimes, corresponding to various climatic zones, on the manufacturing process and operation of beverage can ends made of aluminum alloy AA5182. The production process of aluminum beverage can ends involves multiple steps, including melting, rolling, and stamping, where different temperatures can influence both the production process and the properties of the final product. Furthermore, the mechanical behavior of the final product is affected by the aging process of alloy AA5182, which progresses at varying rates depending on the temperature conditions during storage. The objective of this study is to simulate the production process under various climatic conditions using the finite element method (FEM) and experimentally investigate the dependence of the strength of alloy AA5182 can ends on storage time and temperature. The findings of the study reveal that, under temperature conditions corresponding to warmer climates, the punching force can be reduced by approximately 15% compared to production in colder climates. Additionally, the strength of the finished can exhibits a decrease of about 10% during a month of storage in a warm climate, while no significant decrease was observed in colder climates. These results hold practical significance for the beverage production industry, as the manufacturing and operation of beverage cans are localized in diverse climatic zones. [ABSTRACT FROM AUTHOR]

The accelerated global warming and heterogeneous change in precipitation have been resulting in climate system shifts, which plays a key role in the stability of ecosystem and social economic development. Central Asia is account 80% of the temperate desert, characterized by fragile ecosystem; however, it has experienced the fastest warming in recent decades and projected warming in future. The Köppen-Geiger climate classification is a useful tool to assess the potential impacts of climate change on regional ecosystem. The spatial shift and temporal evolution of each climatic zone based on Köppen-Geiger climate classification are analyzed in historical and future period under different scenarios (RCP2.6, RCP4.5 and RCP8.5), high risk regions that might experience more frequent climatic zone shifts are delimited in this study, which could provide the useful information for developing mitigate strategies in coping with the warming threat. The hotter and dryer subtypes of arid climatic zone and warmer subtypes of temperate climatic zone expanded their coverage in Central Asia, corresponding to the tundra climatic, cooler subtype of arid and temperate climatic zone contracted. Based on a method defining the climate-sensitivity, high risk regions are mainly distributed in northern Kazakhstan and Tianshan Mountains region. [ABSTRACT FROM AUTHOR]