Search

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

The introduction of fifth-generation (5G) mobile networks leads to an increase in energy consumption and higher operational costs for mobile network operators (MNOs). Consequently, the optimization of 5G networks' energy efficiency is crucial, both in terms of reducing MNO costs and in terms of the negative environmental impact. However, many aspects of the 5G mobile network technology itself have been standardized, including the 5G network slicing concept. This enables the creation of multiple independent logical 5G networks within the same physical infrastructure. Since the only necessary resources in 5G networks need to be used for the realization of a specific 5G network slice, the question of whether the implementation of 5G network slicing can contribute to the improvement of 5G and future sixth-generation networks' energy efficiency arises. To tackle this question, this review paper analyzes 5G network slicing and the energy demand of different network slicing use cases and mobile virtual network operator realizations based on network slicing. The paper also overviews standardized key performance indicators for the assessment of 5G network slices' energy efficiency and discusses energy efficiency in 5G network slicing lifecycle management. In particular, to show how efficient network slicing can optimize the energy consumption of 5G networks, versatile 5G network slicing use case scenarios, approaches, and resource allocation concepts in the space, time, and frequency domains have been discussed, including artificial intelligence-based implementations of network slicing. The results of the comprehensive discussion indicate that the different implementations and approaches to network slicing pave the way for possible further reductions in 5G MNO energy costs and carbon dioxide emissions in the future. [ABSTRACT FROM AUTHOR]

The research problem of this paper is related to numerous open questions in the field of energy, its understanding, its use, and the challenges of the energy future. After the introductory part, in which a brief historical overview of energy literacy is provided, the paper focuses on energy literacy, its emergence, and the different approaches to its definition and measurement. The paper analyzes the energy literacy of students at the Faculty of Economics in Rijeka based on their cognitive, affective, and behavioral skills. Their knowledge about energy, energy processes, and the energy efficiency of the objects they encounter on a daily basis is examined. Their personal attitudes and values are examined through various forms of personal initiatives and active participation in energy sustainability projects. Finally, the habits and behavioral patterns that the respondents have in their daily lives and their tendencies to save energy resources and find energy-efficient solutions are examined. Despite some positive findings, the current results are not satisfactory and point to the creation of adequate public policies with a particular focus on education and the role of the corrective mechanisms of the state, but also the need for joint negotiations between policy makers, regulators, scientists, representatives of civil society, and the business community. The particular contribution of this work is reflected in being the first research of its kind conducted among Croatian economics students, as well as among Croatian students in general; in the creation of a research instrument that is conceptually consistent with the findings from the existing literature, but with an original set of questions within each energy literacy skill adapted to the cultural and sociological background of the respondents; and in a kind of progress from previous research by taking into account the quantitative aspect (in addition to the qualitative) assessment of the respondents' energy literacy. [ABSTRACT FROM AUTHOR]

The global energy crisis, which began in 2021 due to the extraordinary economic recovery after the pandemic and intensified after Russia's invasion of Ukraine in February 2022, has changed the conditions of energy management, paying more attention to energy efficiency. Natural gas prices have reached record levels and, consequently, so have electricity prices in some markets. Oil prices have reached their highest level since 2008. Higher energy prices have contributed to sharply increased inflation. Households are again becoming interested in buying coal as a source of heat. High energy and gas prices have pushed many families into poverty and forced some factories to cut production or even close. They have also slowed economic growth to the point where some countries are heading for a serious recession. Paradoxically, the negative effects of the energy crisis may accelerate the introduction of cleaner, sustainable, renewable energy such as wind and solar energy. The energy crisis is comparable to the oil crisis of the 1970s, when it contributed to significant advances in energy efficiency. The current crisis has highlighted the importance of investments in renewable energy resources and initiated the process of integrating regional markets, developing energy efficiency and promoting renewable energies. The aim of this article is to comprehensively explore the complex relationship between energy awareness, consumption patterns, and energy efficiency, with a focus on both individual consumers and industries, during the global energy crisis. This paper is based on a literature review, overarching policy documents, energy reports, and other secondary documents. The primary research method was the systematic literature review method, based on which the impact of the global energy crisis on energy efficiency was evaluated. This study emphasizes the diverse influences on energy awareness, ranging from economic factors to consumer preferences and environmental consciousness. The findings of the paper underscore the significant responsibility of industries in contributing to energy-saving efforts and the active role of consumers in the energy market. The responsibility of industries in contributing to energy efficiency is highlighted, with a call for a comprehensive approach that integrates energy-saving criteria into product development and corporate social responsibility. [ABSTRACT FROM AUTHOR]

A key challenge in prevention of global warming is how to increase energy efficiency, to be able to deal with increased fossil CO2 emissions from rising energy usage. Increasing energy efficiency will decrease energy usage and is in a key role in emission mitigation. The focus is the pulp and paper industry, which is energy-intensive. Development of industrial energy efficiency has been studied before but the role of industrial transformation is still mostly unknown. The knowledge must be improved, to be able to predict future developments in the most effective way. In this research, impact of various production unit closures and start-ups on energy efficiency of the Finnish pulp and paper industry were studied utilizing statistical analysis. Results indicate that about 20% of the Finnish pulp and paper industry energy efficiency improvement between 2011 and 2017 is caused by the major structural changes. The rest, 80% of the progress, was mainly due to improved technology and more optimal operational modes. Additional findings suggest that modern mill start-ups have a significantly greater potential to reduce energy consumption than old mill closures. [ABSTRACT FROM AUTHOR]

This paper proposes an energy-efficient multi-level sleep mode control for periodic transmission (MSC-PUT) in private fifth-generation (5G) networks. In general, private 5G networks meet IIoT requirements but face rising energy consumption due to dense base station (BS) deployment, particularly impacting operating expenses (OPEX). An approach of BS sleep mode has been studied to reduce energy consumption, but there has been insufficient consideration for the periodic uplink transmission of industrial Internet of Things (IIoT) devices. Additionally, 5G New Reno's synchronization signal interval limits the effectiveness of the deepest sleep mode in reducing BS energy consumption. By addressing this issue, the aim of this paper is to propose an energy-efficient multi-level sleep mode control for periodic uplink transmission to improve the energy efficiency of BSs. In advance, we develop an energy-efficient model that considers the trade-off between throughput impairment caused by increased latency and energy saving by sleep mode operation for IIoT's periodic uplink transmission. Then, we propose an approach based on proximal policy optimization (PPO) to determine the deep sleep mode of BSs, considering throughput impairment and energy efficiency. Our simulation results verify the proposed MSC-PUT algorithm's effectiveness in terms of throughput, energy saving, and energy efficiency. Specifically, we verify that our proposed MSC-PUT enhances energy efficiency by nearly 27.5 % when compared to conventional multi-level sleep operation and consumes less energy at 75.21 % of the energy consumed by the conventional method while incurring a throughput impairment of nearly 4.2 % . Numerical results show that the proposed algorithm can significantly reduce the energy consumption of BSs accounting for periodic uplink transmission of IIoT devices. [ABSTRACT FROM AUTHOR]

In offshore winch drive applications, determining the required number of pistons in digital displacement motors is critical for minimizing torque ripples. Digital displacement motors have shown promise for improving energy efficiency for offshore operations, such as placing equipment on the seabed or mineral drilling. However, they are known for exhibiting significant torque ripples, which can affect load-handling precision. This paper estimates the required number of pistons for realizing a digital hydraulic winch drive based on information from a commercial winch. The proposed drive employs full-stroke displacement strategies at high speeds and partial-stroke at low speeds. By simulating steady-state operations, this study correlates torque output with position oscillations. The results show that 37 pistons are required to keep position oscillations below a benchmark threshold of 10 mm throughout the drive's operating range to avoid hindering the drive's performance. However, such a high piston count could result in high costs due to the large, expensive valves required for partial-stroke operations. Therefore, this paper suggests an alternative drive topology for future research, which could potentially reduce the number of pistons that are operated with partial strokes. [ABSTRACT FROM AUTHOR]

The scientific community has shown considerable interest in Industry 4.0 due to its capacity to revolutionise the manufacturing sector through digitalisation and data-driven decision-making. However, the actual implementation of Industry 4.0 within complex industrial settings presents obstacles that are typically beyond the scope of mainstream research articles. In this paper, a comprehensive case-study detailing our collaborative partnership with a leading medical device manufacturer is presented. The study traces its evolution from a state of limited digitalisation to the development of a digital intelligence platform that leverages data and machine learning models to enhance operations across a wide range of critical machines and assets. The main business objective was to enhance the energy efficiency of the manufacturing process, thereby improving its sustainability measures while also saving costs. The project encompasses energy modelling and analytics, Fault Detection and Diagnostics (FDD), renewable energy integration and advanced visualisation tools. Together, these components enable informed decision making in the context of energy efficiency. [ABSTRACT FROM AUTHOR]

This paper presents the findings of fifteen energy audits conducted on industrial sites in Canada's Greater Toronto Area (GTA). The audits covered a range of industries including food processing, packaged goods, and finishing processes (powder-coating). The primary focus of the audits was to analyze the natural gas consumption and the performance of major-gas-consuming equipment. The audits identified natural-gas-consuming equipment that could be optimized to yield energy and operational cost savings and greenhouse gas (GHG) reduction opportunities. Food production plants' energy intensity ranges from 5.59 m3/ft2 to 17.73 m3/ft2. Therefore, there is a significant opportunity to improve energy consumption through better technology integration. The results of the audits indicate a trend of an increase in the percentage of non-productive consumption with non-productive time. The proposed energy-saving measures include reducing non-productive natural gas consumption, gas-fired equipment tune-up, optimizing boiler loads, and reducing oven exhaust by using variable frequency drives (VFDs). The findings of this study could be used to develop a demand-side management program specifically for small- and medium-sized industrial facilities in the Greater Toronto Area and other parts of Canada. [ABSTRACT FROM AUTHOR]

This paper addresses the optimization of contracted electricity demand (CD) for commercial and industrial entities, focusing on cost reduction within the Brazilian time-of-use electricity tariff scheme. Leveraging genetic algorithms (GAs), this study proposes a practical approach to determining the optimal CD profile, considering the complex dynamics of energy demand on a city-like load. The methodology is applied to a case study at the Federal University of Pará, Brazil, where energy efficiency and demand response initiatives as well as renewable energy projects are underway. The findings highlight the significance of tailored demand management strategies in achieving energy-related cost reduction for large-scale consumers, with implications for economic efficiency in energy consumption. [ABSTRACT FROM AUTHOR]

This paper offers a theoretical and experimental examination of the concurrent production of electricity and heat using photovoltaic thermal (PV/T) technology. The efficiency performance of the PV/T system is meticulously analyzed using MATLAB/Simulink software environments. Notably, the proposed PV/T system shows reliable performance, and its validity is confirmed through experimental validation on a test stand with a single PV/T panel positioned at a 45-degree angle to the horizontal and a 0-degree azimuth angle. The measurements were conducted during the summer season, and two models were suggested to calculate the overall efficiency of the PV/T system. The variance between the results obtained from the two models was minimal, below 5%. For the examined panel type, the following average values were derived: electrical efficiency = 12.01%, thermal efficiency = 47.21%, and overall efficiency = 59.23%. [ABSTRACT FROM AUTHOR]

In this paper, we outline a transdisciplinary approach and design thinking methodology (TADTM) to tackle complex problems. Our premise is that these problems need a fundamental understanding of technological solutions and those for human interactions, business operations, financing, socioeconomic governance, legislation, and regulations. They must be approached by different decisionmakers from different disciplines to establish seamless interactions and structured teamwork. In this regard, we emphasize the need for a transdisciplinary framework that accounts for personal preferences based on human behavior as well as the traditional interdisciplinary frameworks. To test and prove our hypothesis, three case studies are discussed. Case Study 1 is based on our studies at a major medical establishment, and Case Study 2 is about the integrated engineering and architecture approach we used at our university campus. Case Study 3 is based on an ongoing project to lead industrial corporations to change their energy policies with practical energy efficiency measures and by adapting renewable/alternative energy adaptations for their operations. Developing creative solutions and strategies to decrease atmospheric greenhouse gas emissions requires such an energy transition framework and should involve every person, company, entity, and all governments. It can only be achieved with efforts on both local and global levels, which needs to convince (a) industries to change their traditional operation modalities, (b) people to alter their consumption behaviors, and (c) governments to change their rules, regulations, and incentives. The complexity and magnitude of this enormous task demand the coordination and collaboration of all stakeholders, as well as the need for technological innovations. [ABSTRACT FROM AUTHOR]

In the context of an insulated area with a subtropical climate, such as La Réunion island, it is crucial to reduce the energy consumption of buildings and develop local renewable energy sources to achieve energy autonomy. Direct current (DC) nanogrids could facilitate this by reducing the energy conversion steps, especially for solar energy. This article presents the deployment and efficiency evaluation of a 48 VDC low-voltage direct current (LVDC) nanogrid, from conception to real-world installation within a company. The nanogrid consists of a photovoltaic power plant, a lithium–iron–phosphate (LFP) battery, and DC end-use equipment, such as LED lighting and DC fans, for two individual offices. For identical test conditions, which are at an equivalent cabling distance and with the same final power demand, the total power consumed by the installation is measured for several stages from 50 to 400 W, according to a 100% DC configuration or a conventional DC/AC/DC PV configuration incorporating an inverter and AC/DC converter. The methodology used enables a critical view to be taken of the installation, assessing both its efficiency and its limitations. Energy savings of between 23% and 40% are measured in DC for a power limit identified at 150 W for a distance of 25 m. These results show that it is possible to supply 48 VDC in an innovative way to terminal equipment consuming no more than 100 W, such as lighting and air fans, using the IEEE 802.3 bt power over ethernet (PoE) protocol, while at the same time saving energy. The nanogrid hardware and software infrastructure, the methodology employed for efficiency quantification, and the measurement results are described in the paper. [ABSTRACT FROM AUTHOR]

It is well known that buildings have a sizeable energy and environmental footprint. In particular, in environments like university campuses, the occupants as well as occupancy in shared spaces varies over time. Systems for cooling in such environments that are centrally controlled are typically threshold driven and do not account for occupant feedback and thus are often relying on a reactive approach (fix after identifying problems). Therefore, having a fixed thermal operating set point may not be optimal in such cases—both from an occupant comfort and well-being as well as an energy efficiency perspective. To address this issue, a study was conducted which involved development and deployment of an experimental Internet of Things (IoT) prototype system and an Android application that facilitated people engagement on a university campus located in the UAE which typically exhibits hot climatic conditions. This paper showcases data driven insights obtained from this study, and in particular, how to achieve a balance between the conflicting goals of improving occupant comfort and energy efficiency. Findings from this study underscore the need for regular reassessments and adaptation. The proposed solution is low cost and easy to deploy and has the potential to reap significant savings through a reduction in energy consumption with estimates indicating around 50–100 kWh/day of savings per building and the resulting environmental impact. These findings would appeal to stakeholders who are keen to improve energy efficiency and reduce their operating expenses and environmental footprint in such climatic conditions. Furthermore, collective action from a large number of entities could result in significant impact through this cumulative effect. [ABSTRACT FROM AUTHOR]

In this paper, we propose an improved clustering algorithm for wireless sensor networks (WSNs) that aims to increase network lifetime and efficiency. We introduce an enhanced fuzzy spider monkey optimization technique and a hidden Markov model-based clustering algorithm for selecting cluster heads. Our approach considers factors such as network cluster head energy, cluster head density, and cluster head position. We also enhance the energy-efficient routing strategy for connecting cluster heads to the base station. Additionally, we introduce a polling control method to improve network performance while maintaining energy efficiency during steady transmission periods. Simulation results demonstrate a 1.2% improvement in network performance using our proposed model. [ABSTRACT FROM AUTHOR]

In a scenario characterised by mitigation concerns and calls for greater resilience in the energy sector, energy audits (EAs) emerge as an essential mean for enhancing end-use energy consumption awareness and efficiency. Such a tool allows us to assess the different energy carriers consumed in a productive sector, offering insight into existing energy efficiency improvement opportunities. This opens avenues for research to devise an econometrics-based methodology that encapsulate production sites and their environmental essentials. This paper contributes to the literature by exploiting the EAs received by the Italian National agency for New technologies, Energy, and Sustainable Economic Development (ENEA) in 2019 from the Italian plastics manufacturing sector, matched with Italian firm-based data extracted from the Analisi Informatizzata delle Aziende Italiane (Italian company information and business intelligence) (AIDA) database. In particular, we investigate how the implementation of energy efficiency measures (EEMs) is influenced by a set of contextual factors, as well as features relating to the companies and EEMs themselves. The empirical investigation focuses on the EAs submitted to ENEA in 2019, which was strategically chosen due to its unique data availability and adequacy for extensive analysis. The selection of 2019 is justified as it constitutes the second mandatory reporting period for energy audits, in contrast to the 2022 data, which are currently undergoing detailed refinement. In line with the literature, the adopted empirical approach involves the use of both the OLS and logistic regression models. Empirical results confirm the relevance of economic and financial factors in guiding the decisions surrounding the sector's energy performance, alongside the analogous influence of the technical characteristics of the measures themselves and of the firms' strategies. In particular, the OLS model with no fixed effects shows that a one-percent variation in investments is associated with an increase in savings performance equal to 0.63%. As for the OLS model, including fixed effects, the elasticity among the two variables concerned reaches 0.87%, while in the logistic regression, if the investment carried out by the production sites increases, the expected percentage change in the probability that the energy-saving performance is above its average is about 187.77%. Contextual factors that prove to be equally influential include the incentive mechanism considered and the traits of the geographical area in which the companies are located. Relevant policy implications derived from this analysis include the importance of reducing informational barriers about EEMs and increasing technical assistance, which can be crucial for identifying and implementing effective energy solutions. [ABSTRACT FROM AUTHOR]

Sustainable smart cities (SSCs) target decarbonisation by optimising energy consumption through the emerging capabilities of technology. Nevertheless, the energy consumption behaviour of end users has the potential to compromise the effectiveness of technological interventions, reflecting the importance of active social engagement in realising decarbonisation goals. Although extensive research exists on energy consumption behaviour, little is known about how technology engagement affects it, the nature of these technologies, and their role in SSC. The paper aims to identify, categorise, and investigate the smart technologies that impact household energy consumption behaviours and their integration into the larger SSC system. Following a systematic review of 60 articles from the Scopus database (2013–2023), the study found 45 smart technologies cited, with 49% affecting efficiency behaviour and 51% affecting curtailment behaviour. While these technologies inform the city administration level in the SSC framework, the role of end users remains unclear, suggesting a technocratic approach. The study proposes the Sustainable Smart City Network to facilitate a grassroots approach, identifying five key domains: government policies, smart technology adoption, smart technology engagement, smart city infrastructure, and urban sustainability. The study provides an original contribution to knowledge by unveiling the key technologies affecting energy consumption behaviour and outlining the pragmatic requirements for achieving decarbonisation through a grassroots approach. [ABSTRACT FROM AUTHOR]

Fifth Generation (5G) mobile networks introduce the concept of slicing to ensure isolation among the various supported heterogeneous services. The User Equipment (UE) can be connected to multiple slices simultaneously. Additionally, the notion of a Bandwidth Part (BWP) was also instigated to reduce power consumption. A BWP is a small chunk of the bandwidth scanned by the UE to retrieve its service data. Therefore, a UE connected to multiple services can be configured with multiple BWPs each associated with a given service. Such UEs find themselves scanning multiple BWPs, which can be time consuming and highly energy intensive. Hence, it is paramount to study the appropriate choice of the BWP configuration from an energy-efficiency perspective for multi-slice users depending on their battery level. In this paper, two energy-efficient BWP selection solutions are proposed for users connected to multiple slices. The first solution is based on a centralized approach where UEs are stirred optimally to the best BWP configuration, while the second solution relies on a user-centric distributed approach using non-cooperative game theory. The proposed schemes take into account the users' battery level and their sojourn time in the network as well as the scanned BWP size. Both solutions are compared with one another and against the legacy solution. Intensive simulation results demonstrate the efficiency of our proposition in terms of users' energy efficiency and quality of service. [ABSTRACT FROM AUTHOR]

The extensive consumption of energy in manufacturing has led to a large amount of greenhouse gas emissions that have caused an enormous effect on the environment. Therefore, investigating how to reduce energy consumption in manufacturing is of great significance to cleaner production. This paper considers an energy-conscious unrelated parallel batch processing machine scheduling problem under time-of-use (TOU) electricity prices. Under TOU, electricity prices vary for different periods of a day. This problem is grouping jobs into batches, assigning the batches to machines and allocating time to the batches so as to minimize the total electricity cost. A mixed-integer linear programming model and two groups of heuristics are proposed to solve this problem. The first group of heuristics first forms batches, assigns the batches to machines and finally allocates time to the batches, while the second group of heuristics first assigns jobs to machines, batches the jobs on each machine and finally allocates time to each batch. The computational results show that the SPT-FBLPT-P1 heuristic in the second group can provide high-quality solutions for large-scaled instances in a short time, in which the jobs are assigned to the machines based on the shortest processing time rule, the jobs on each machine are batched following the full-batch longest processing time algorithm, and the time is allocated to each batch following an integer programming approach. The MDEC-FBLPT-P1 heuristic that uses the minimum difference of the power consumption algorithm to assign the jobs also performed well. [ABSTRACT FROM AUTHOR]

Reducing the heat demand of existing buildings is an essential prerequisite for achieving a greenhouse gas-neutral energy supply. Numerous studies and open-source tools deal with heat demand mapping. It is not uncommon that estimated heat demands deviate from real heat consumption, so existing approaches should be improved by including in-depth building information. Some tools have recognised this problem and offer built-in functions for factoring various parameters into their assessments. Nevertheless, the necessary information is usually missing and should be obtained first. In this paper, we analyse the impact of thermal refurbishment and climate on building heat demand; hence, generate public datasets with corresponding key figures for each building type in different efficiency states and years. Accounting for already performed refurbishments in methodologies for assessing the actual state heat demand for cities will result in a reduction of at least 8% up to more than 21%, depending on whether conventional or passive house components were installed. As a result of climatic differences within Germany, a building's heat demand can be up to 39% higher or up to 21% lower than the heat demand of an identical building in the reference climate of Germany. By further developing the approaches of the tools Hotmaps and Heat Cadastre Hamburg, we could improve the estimated heat demand of Hamburg to a value approximating the real consumption. [ABSTRACT FROM AUTHOR]

This paper presents innovative machine-learning solutions to enhance energy efficiency in electrical tomography for industrial reactors. Addressing the key challenge of optimizing the neural model's loss function, a classifier tailored to precisely recommend optimal loss functions based on the measurement data is designed. This classifier recommends which model, equipped with given loss functions, should be used to ensure the best reconstruction quality. The novelty of this study lies in the optimal adjustment of the loss function to a specific measurement vector, which allows for better reconstructions than that by traditional models trained based on a constant loss function. This study presents a methodology enabling the development of an optimal loss function classifier to determine the optimal model and loss function for specific datasets. The approach eliminates the randomness inherent in traditional methods, leading to more accurate and reliable reconstructions. In order to achieve the set goal, four models based on a simple LSTM network structure were first trained, each connected with various loss functions: HMSE (half mean squared error), Huber, l1loss (L1 loss for regression tasks—mean absolute error), and l2loss (L2 loss for regression tasks—mean squared error). The best classifier training results were obtained for support vector machines. The quality of the obtained reconstructions was evaluated using three image quality indicators: PSNR, ICC, and MSE. When applied to simulated cases and real measurements from the Netrix S.A. laboratory, the classifier demonstrated effective performance, consistently recommending models that produced reconstructions that closely resembled the real objects. Such a classifier can significantly optimize the use of EIT in industrial reactors by increasing the accuracy and efficiency of imaging, resulting in improved energy management and efficiency. [ABSTRACT FROM AUTHOR]

Today's energy challenges are multifaceted. Over the past 30–40 years, energy issues have been discussed and published on an extensive scale. The green transition involves concrete actions related to increasing energy efficiency, replacing fossil fuels with alternative fuels, producing energy using renewable resources, creating various means of transport that use electric motors, identifying technical solutions that generate an increased energy yield in the case of buildings, and waste reduction, reuse and recycling. In order to attain a climate-neutral environment, it is mandatory to impose regulations, measures and actions to help decarbonize the energy sector. The analysis of published articles on these issues is the subject of this large and information-dense review. Concretely, the transition to climate neutrality will generate obvious advantages at an economic, social and technological level, for example, the opportunity for economic growth, new business models and new markets, and the generation of new jobs or technological development. At the same time, this paper underscores the need for a multifaceted approach, integrating technological innovation, policy intervention and global cooperation for an effective energy transformation. The review suggests future issues and research directions, focusing on viable strategies for energy transition and its socio-economic environmental impacts. [ABSTRACT FROM AUTHOR]

The water and sewage sector is responsible for approximately 3.5% of energy consumption in the European Union (EU). Leaks causing water losses in water distribution systems (WDSs) are responsible for approximately 24% of water consumption in the EU, which contributes to additional energy losses and emissions of greenhouse gases (GHGs). The implementation of the Directive of the European Parliament and the EU Council on the quality of drinking water (Directive (EU) 2020/2184) introduces the obligation to report water losses by large water utilities in EU Member States. The reported indicator will be the infrastructure leakage index (ILI) which is the ratio between current annual real loss (CARL) and unavoidable annual real loss (UARL). The paper presents a comparative analysis of selected water loss performance indicators calculated for 12 Polish WDSs. Results show that values of calculated indicators were diverse. The overestimation of both the reported value of operating pressure and total length of service connections may lead to the overestimation of UARL and thus to the underestimation of ILI. Obtaining a satisfactory, but incorrect, value of ILI may result in the abandonment of activities aimed at water loss reduction. Water losses in water distribution systems (WDSs) contribute to a significant increase in both energy consumption and GHG emissions. Total approximated electrical energy related to CARL consumed in 2021 by eleven utilities (except for one company) amounted to 3.276 GWh and total approximated carbon emissions amounted to 2807.84 MgCO2eq. In the case of four WDSs, reduction of ILI to the value of 1.5 may reduce GHG emissions by 31–54%. It can be concluded that the implementation of Directive (EU) 2020/2184 will require unification of methodology for calculation of parameters used in ILI evaluation in all EU Member States. [ABSTRACT FROM AUTHOR]

With the increasing demand for sustainable urban development, smart cities have emerged as a promising solution for optimizing energy usage, reducing emissions, and enhancing the quality of life for citizens. In this context, the combined use of key performance indicators (KPIs) and data analytics has gained significant attention as a powerful tool for promoting energy efficiency and emissions reduction in urban areas. This paper presents a comprehensive conceptual framework in which a series of KPIs are proposed to serve as essential metrics for guiding, monitoring, and assessing energy efficiency and emissions reduction levels in smart cities. Some of the included KPIs in the analysis are 'annual energy consumption per person', 'reduction in greenhouse gas emissions', 'public transport use', and 'adoption of renewable energy'. By incorporating these KPIs, city planners and policymakers can gain valuable insights into the effectiveness of sustainability initiatives. Furthermore, the paper explores how the integration of KPIs with data analytics can be used for monitoring and assessing the overall performance of the city in terms of energy efficiency, emissions reduction, and the enhancement of urban living conditions. Visualization tools, such as radar plots, and time series analysis forecasting methods allow data to be processed and patterns to be identified, enabling informed decision-making and efficient resource allocation. Real-life case studies of ongoing smart city projects are presented in the paper, which also provides a KPI comparison among different European cities, as well as models to forecast the evolution of KPIs related to energy usage and emissions reduction in different European cities. [ABSTRACT FROM AUTHOR]

The highlighted energy consumption of Internet data center (IDC) in China has become a pressing issue with the implementation of the Chinese dual carbon strategic goal. This paper provides a comprehensive review of cooling technologies for IDC, including air cooling, free cooling, liquid cooling, thermal energy storage cooling and building envelope. Firstly, the environmental requirements for the computer room and the main energy consumption items for IDC are analyzed. The evaluation indicators and government policies for promoting green IDC are also summarized. Next, the traditional cooling technology is compared to four new cooling technologies to find effective methods to maximize energy efficiency in IDC. The results show that traditional cooling consumes a significant amount of energy and has low energy efficiency. The application of free cooling can greatly improve the energy efficiency of IDC, but its actual implementation is highly dependent on geographical and climatic conditions. Liquid cooling, on the other hand, has higher energy efficiency and lower PUE compared to other cooling technologies, especially for high heat density servers. However, it is not yet mature and its engineering application is not widespread. In addition, thermal energy storage (TES) based cooling offers higher energy efficiency but must be coupled with other cooling technologies. Energy savings can also be achieved through building envelope improvements. Considering the investment and recovery period for IDC, it is essential to seek efficient cooling solutions that are suitable for IDC and take into account factors such as IDC scale, climate conditions, maintenance requirements, etc. This paper serves as a reference for the construction and development of green IDC in China. [ABSTRACT FROM AUTHOR]

This paper presents the concept of an innovative control of a central heating system in a multifamily building based on the original thermodynamic model, the resulting architecture of the control system, and the originally designed and manufactured wireless temperature sensors for thermal zones. The novelty of this solution is the developed layers of the control system: distributed measurement and correction analysis, which is based on the existing infrastructure and the local HVAC controller. This approach allows for the effective use of the measured temperature data from thermal zones and finally sending the value of the calculated correction of settings to the controller. Moreover, in the analytical layer, a model was also implemented that calculates the necessary amount of energy based on data from the subsystem of temperature sensors located in the thermal zones of the building. The use of the algorithmic strategy presented in this paper extends the functionality and significantly improves the energy efficiency of the existing, classic, reference heating control algorithm by implementing additional control loops. Additionally, it enables integration with demand-side response systems. The presented concept was successfully tested, achieving real energy savings for heating by 12%. These results are described in a case-study format. The authors believe that this concept can be used in other buildings and thus will have a positive impact on the energy savings used to maintain thermal comfort in buildings and significantly reduce CO2 emissions. [ABSTRACT FROM AUTHOR]

Energy poverty affects numerous households across the globe and has several key implications and concerns for public health and social equity. Energy poverty is defined as "the lack of access to modern and affordable energy services". Individuals or communities in energy poverty face limitations in accessing reliable, affordable, and sustainable energy. This review paper examines a focused subset of recent research on energy poverty highlighted by the "NSF 2026: Priorities and Research Needs for an Equitable Energy Transition" workshop and the United States Department of Energy's Office of Energy Justice Policy and Analysis to help frame energy poverty's impacts on policy, poverty alleviation, environmental impact, and social inequity. This review paper uses five themes to organize previous energy poverty work: (1) Energy Poverty and Justice Definitions and Metrics; (2) Behavioral Aspects of Energy Poverty; (3) Efficacy of Energy Assistance Programs; (4) Efficiency of Energy Efficiency Policy; (5) The Energy Transition and Environmental and Energy Justice. We found that the literature examined how comprehensive assessment of energy poverty requires going beyond standard statistics and metrics and must include an understanding of how underserved households interact with energy. We found strong optimism for the clean energy transition's ability to significantly alleviate energy poverty, but only if policymakers include equity. Finally, we found that while there is plenty of work highlighting deficiencies there is a dearth of work examining successful implementations and how to replicate them which will be needed if the clean energy transition is to match its potential. [ABSTRACT FROM AUTHOR]

On 26 April 2017, Mexico formally adopted the 2030 Sustainable Development Agenda to link the national government to local governments, the private sector, civil society and academia. The restoration of heritage residential buildings (recovery programme) and the construction of new residential buildings aim to create a diversified environment for populations at different economic levels. However, the restoration programme faces conservation challenges. Given this context, this paper presents the results of in-depth, semi-structured interviews conducted with stakeholders in Mexico's heritage and energy sectors. The duration of each interview was approximately two hours, with 52,372 total interview words. The paper identifies prevailing opinions regarding prioritising historical values, energy efficiency, historic buildings and users concerning Mexico City's Historical Centre, a World Heritage Site needing a more appropriate sustainable development plan. Using grounded theory and thematic analysis, the interview data were analysed based on the interrelationship between thermal comfort, energy efficiency and heritage conservation changes over time. The results of this research will strengthen our understanding of the interventions and processes involved in managing and living in this World Heritage Site and its future impacts on buildings. The approach also underscores the importance of how stakeholders prioritise different values in making energy efficiency-promoting decisions and enhances awareness of the decision-making process and actions adopted by heritage building users. Thus, understanding the dynamic interrelationship between values, users and energy could improve the sustainable management of heritage sites and future development. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to uncover how the process of managing electricity in buildings based on the Internet of Things occurs. In particular, the work seeks to depict the factors affecting electricity consumption and management, as well as the application of the Internet of Things in energy management. A systematic literature review is used to examine the breadth of the electric energy management literature, encompassing bibliometric and thematic analysis based on an established procedure. The findings show the evolution of this field within key research networks with a few papers covering important elements of energy management, such as energy use, consumption and monitoring, assessment, and planning, in an integrative manner. Within this field, lacking in theory and practice, the originality of the work is the assembly of electric energy management into a conceptual framework based on real-time consumption and the Internet of Things (IoT). Indeed, the framework brings together the breadth of factors affecting consumption, energy use, and improvements that have been dispersed across the literature into one place. This framework, therefore, represents a stage towards an integrative view of IoT electric energy management and subsequent enhancement of theory and energy efficiency adoption. [ABSTRACT FROM AUTHOR]

With the development of the Internet of Things (IoT), the number of devices will also increase tremendously. However, we need more wireless communication resources. It has been shown in the literature that non-orthogonal multiple access (NOMA) offers high multiplexing gains due to the simultaneous transfer of signals, and massive multiple-input–multiple-outputs (mMIMOs) offer high spectrum efficiency due to the high antenna gain and high multiplexing gains. Therefore, a downlink mMIMO NOMA cooperative system is considered in this paper. The users at the cell edge in 5G cellular system generally suffer from poor signal quality as they are far away from the BS and expend high battery power to decode the signals superimposed through NOMA. Thus, this paper uses a cooperative relay system and proposes the mMIMO NOMA double-mode model to reduce battery expenditure and increase the cell edge user's energy efficiency and sum rate. In the mMIMO NOMA double-mode model, two modes of operation are defined. Depending on the relay's battery level, these modes are chosen to utilize the system's energy efficiency. Comprehensive numerical results show the improvement in the proposed system's average sum rate and average energy efficiency compared with a conventional system. In a cooperative NOMA system, the base station (BS) transmits a signal to a relay, and the relay forwards the signal to a cluster of users. This cluster formation depends on the user positions and geographical restrictions concerning the relay equipment. Therefore, it is vital to form user clusters for efficient and simultaneous transmission. This paper also presents a novel method for efficient cluster formation. [ABSTRACT FROM AUTHOR]

Sensor networks, as a special subtype of wireless networks, consist of sets of wirelessly connected sensor nodes often placed in hard-to-reach environments. Therefore, it is expected that sensor nodes will not be powered from the power grid. Instead, sensor nodes have their own power sources, the replacement of which is often impractical and requires additional costs, so it is necessary to ensure minimum energy consumption. For that reason, the energy efficiency of wireless sensor networks used for monitoring environmental parameters is essential, especially in remote networking scenarios. In this paper, an overview of the latest research progress on wireless sensor networks based on LoRa was provided. Furthermore, analyses of energy consumption of sensor nodes used in agriculture to observe environmental parameters were conducted using the results of real measurements in the field, as well as simulations carried out based on collected data about real equipment. Optimization methods of energy consumption, in terms of choosing the appropriate data collection processes from the conducted field measurements, as well as the settings of network radio parameters imitating real conditions used in conducted simulations were highlighted. In the analyses, special emphasis was placed on choosing the optimal packet size. Unlike in other papers analyzing energy efficiency of LoRa communication, in this paper, it was proven that the adjustment of the transmission speed to the actual size of the packet is important for better energy efficiency of communication and that it can reduce energy consumption considerably. Moreover, in the paper, the contents of a packet that can be used in precision agriculture is suggested in order to prove that the 6-bit packet is sufficient for energy-efficient collection of parameters from the environment, in contrast to the 11-bit packets used in standard commercially available equipment. [ABSTRACT FROM AUTHOR]

The significance of vehicle-to everything (V2X) communication in ensuring road safety is undeniable. In addition, real-time vehicle communication requires an ample amount of spectrum resources. However, the existing spectrum resources are seriously scarce, and the utilization rate is not high, leading to high delays in V2X communication and other unfavorable factors in the case of fast-moving vehicles, bringing great safety risks to driving. Load balancing is one of the most effective methods to improve spectrum utilization. However, the existing load balancing schemes merely focus on static conditions, with a lack of joint scheduling schemes, which cannot support the communication framework of dynamic V2X. To address both of these issues, in this paper, a new communication method is proposed. In addition, this paper studies a joint load balancing scheme of mobility vehicle-to-vehicle (V2V) and user association under incomplete channel state information (CSI) and realizes the load balancing management of a cross-cell V2X network. An algorithm combining power control and resource allocation mode selection is proposed. In particular, according to different coverage areas, different allocation algorithms are adopted to maximize the overall system efficiency. The simulation results show that this strategy can maintain low latency and effectively improve the system energy efficiency of vehicle users. [ABSTRACT FROM AUTHOR]

Additive manufacturing (AM) offers unique capabilities in terms of design freedom and customization, contributing to sustainable manufacturing. However, energy efficiency remains a challenge in the widespread adoption of AM processes. In this paper, we present a comprehensive review of the current research on energy efficiency in AM, addressing challenges, opportunities, and future directions. Our analysis reveals a lack of standardization in the measurement and reporting of energy consumption, making it difficult to evaluate and compare the energy performance of various systems. We propose a holistic framework to address energy efficiency throughout the entire life cycle of the AM process, highlighting the importance of design optimization, material selection, advanced control systems, and energy management strategies. The paper also emphasizes the need for further research on the interactions between process parameters, along with the potential of integrating renewable energy sources into AM systems. This review offers valuable insights for both academics and industry professionals, calling for standardized methodologies and a focus on energy management to optimize energy efficiency in AM processes, ultimately enhancing competitiveness and sustainability in modern manufacturing. [ABSTRACT FROM AUTHOR]

This paper applied the advocacy coalition framework to explore and explain the political processes creating policies to enhance energy efficiency of European Union (EU) industry. The paper used legislation on energy audits and energy management systems as a proxy for EU policy on energy efficiency in industry. Based on qualitative text analysis of EU policy documents, including a proposal to recast the energy efficiency directive, amendments to the proposal suggested by Member States, the Council and the European Parliament, and reports from negotiations, the paper identified four advocacy coalitions with different core beliefs, spanning from those that want few companies to implement energy audits or energy management systems, and that recommendations from audits should not be mandatory to implement, to those that advocate that many companies implement energy audits and management systems and that it should be mandatory to implement measures recommended in audits. It was further found that policy change followed an external shock, deliberative negotiations, and policy-oriented learning. The identification of core beliefs and advocacy coalitions will help policymakers and other stakeholders become more aware of their own and others' values on energy efficiency and how these could be changed. As important was the differentiation of deep core beliefs, policy core beliefs and secondary beliefs. Which beliefs can be easily changed, which cannot? [ABSTRACT FROM AUTHOR]

The European Commission has recently announced two guiding principles for EU product policy: First, product policy shall ensure that the performance of front-runner products in terms of sustainability becomes the norm, and second, the effectiveness of the current Ecodesign legislative framework is going to be significantly improved. Within this paper, already existing front-runner approaches and recent and ongoing product policy-making processes were reviewed. Based on the results, an EU front-runner approach is outlined. The presented approach (i) refers to performance levels of the best products already available on the market, (ii) aggregates information in existing databases, and (iii) works semi-automated. Together, all three attributes have a high potential to facilitate and accelerate the specification of appropriate minimum requirements for products at the EU level. This way, EU policymakers can deliver on the core objectives of the Ecodesign legislative framework much better. The basic mechanism and its legal entrenchment of the approach are illustrated for the energy efficiency of energy-related products. In addition, the Front-Runner Approach can be applied to any product group in the scope of the upcoming Ecodesign for Sustainable Products Regulation and to a wide range of product-related minimum requirements, such as durability, reparability, or recycled content. The study's objective is to suggest a tailor-made and dynamic approach to keep the EU product legislation up to date using innovative technology based on the investigation of current regulations and identify the gap. Experiences from three international case studies suggest that a front-runner approach to setting energy-performance standards can drive innovation and reduce energy consumption via promoting energy-efficient products; transparency about available products is one of the key factors and can be established by a database. The EU front-runner approach comprises extending the existing energy label database (or making use of the digital product passport) and introducing a legislative procedure that triggers changes in the energy efficiency requirements in the specific EU regulations if the database shows that a certain threshold value is reached. Challenges such as limited EU staff capacities and opportunities such as increased dynamic are discussed. [ABSTRACT FROM AUTHOR]

The aim of this paper is to simulate the European natural gas system in extreme situations and to determine its weaknesses in terms of demand coverage. An assessment has also been made of the targets set for existing energy efficiency regulations and their effects on the coverage of future natural gas demand. This document assesses the potential for energy efficiency improvements associated with European countries and the effect of such improvements on the lessening of the natural gas demand. Once the efficiency improvement potential has been identified, the results of demand coverage in various scenarios of natural gas supply cut-off via pipelines were studied. The expected result reflects the study of the effect of the presumed demand reduction, due to the improvement of energy efficiency, on the self-sufficiency of the natural gas network and the improvement of energy coverage for EU countries. To carry out this study, an evaluation of the current infrastructures was developed, the existing resources were optimized, and the independence of the system was quantified in relation to the current situation of natural gas consumption at the European level. The proposed model has resulted in improvements in the coverage of the demand of certain countries and has detected those with systems that are not robust enough to face extreme crisis situations. The main conclusions are that the natural gas system has improved considerably from 2009 to the present, and that, in the event of massive gas cuts, there is a real risk of being unable to cover the natural gas demand of several countries with a very high dependence on gas from Russia. [ABSTRACT FROM AUTHOR]

The decline in power quality within electrical networks is adversely impacting the energy efficiency and safety of transmission elements. The growing prevalence of power electronics has elevated harmonic levels in the grid to an extent where their significance cannot be overlooked. Additionally, the increasing integration of renewable energy sources introduces heightened fluctuations, rendering the prediction and simulation of working modes more challenging. This paper presents an improved algorithm for calculating power transformer losses attributed to harmonics, with a comprehensive validation against simulation results obtained from the Power Factory application and real-world measurements. The advantages of the algorithm are that all evaluations are performed in real-time based on single-point measurements, and the algorithm was easy to implement in a Programmable Logic Controller (PLC). This allows us to receive the exchange of information to energy monitoring systems (EMSs) or with Power factor Correction Units (PFCUs) and control it. To facilitate a more intuitive understanding and visualization of potential hazardous scenarios related to resonance, an extra Dijkstra algorithm was implemented. This augmentation enables the identification of conditions, wherein certain branches exhibit lower resistance than the grid connection point, indicating a heightened risk of resonance and the presence of highly distorted currents. Recognizing that monitoring alone does not inherently contribute to increased energy efficiency, the algorithm was further expanded to assess transformer losses across a spectrum of Power Factory Correction Units power levels. Additionally, a command from a PLC to a PFCU can now be initiated to change the capacitance level and near-resonance working mode. These advancements collectively contribute to a more robust and versatile methodology for evaluating power transformer losses, offering enhanced accuracy and the ability to visualize potentially critical resonance scenarios. [ABSTRACT FROM AUTHOR]

The public procurement system in Poland remains highly centralized, although thanks to European Community directives, it is part of European law. Therefore, it has established procedures for sustainable public procurement, including so-called green public procurement. In addition to the Public Procurement Law of 11 September 2019, other provisions introducing specific instruments (e.g., energy labels, environmental labels) should be taken into consideration, as such provisions make it easier for contracting authorities to take environmental aspects into account in tender procedures. Bearing in mind the existing legal regulations, this article features a diagnosis of the degree of use of measures to improve energy efficiency in public procurement procedures and models activities related to improving this situation. For this purpose, surveys were conducted for 120 entities applying the provisions of the Public Procurement Law. Taking into consideration the results obtained in the survey, 15 factors related to the improvement of energy efficiency in tender procedures were selected with the help of 12 purposively selected experts connected with the issues raised in this article. Thanks to their expert knowledge, three key factors determining the wider use of this instrument were modeled by means of the systems theory–based methodology of network thinking. The paper also attempts to indicate the key factors determining the wider use of this instrument, using the network thinking methodology for this purpose. As a result of the conducted research, it was found that these factors include human capital, industry, and the energy crisis. Research on the subject in the Polish literature remains innovative and allows for the formulation of application recommendations for decision makers. The concept of energy efficiency in this paper refers to the ratio of the results obtained to the energy input. Efficient use of energy aims to reduce the amount of energy needed to deliver products and services. [ABSTRACT FROM AUTHOR]

Energy efficiency programs funded by utility customers provide an electricity resource in most U.S. states, but their scale and cost of saving electricity varies significantly by state. In this paper, we explore the drivers of the cost of saved electricity in these programs with an econometric model and nearly a decade of data reported by efficiency program administrators. We found strong evidence for economies of scale and weak evidence for diseconomies of scale, which suggests that states with low levels of efficiency savings relative to retail sales can increase the size of their efficiency programs without large increases to the cost of saved electricity. We discuss examples of energy efficiency forecasting and potential modeling in light our econometric analysis and identify methodological improvements relevant to utilities and grid operators. This paper provides insights into the economics of customer-funded efficiency programs that will support regulators, utilities, and policymakers to utilize energy efficiency as a resource. [ABSTRACT FROM AUTHOR]

Bottom-up energy system models have been used extensively to analyse future energy scenarios, addressing a wide variety of policy questions. This paper focuses on energy efficiency, a key energy, climate, and economic policy area where several examples of energy system model applications can be found in the literature. This paper analyses how different studies implement energy efficiency scenarios in energy system models and explains how the approach taken can affect the results significantly, potentially affecting policy decisions. This analysis contributes to understanding how this type of modelling framework considers energy efficiency policy issues and the extent of insight provided, or not, on different dimensions. With the aim of identifying 'best practice' in using energy system models to inform effective analysis of energy efficiency policy, the UK TIMES energy system model is used to implement five different energy efficiency scenarios for residential heating following different modelling approaches and replicating scenarios available in the literature. The study concludes that energy efficiency scenarios, implementing the same target, produce significantly different results in terms of technology mix, energy use, emissions and costs. Additionally, the outcomes show that there is no overall best energy efficiency scenario, as each impacts on different policy targets, which could come into conflict with each other. [ABSTRACT FROM AUTHOR]

Energy efficiency is one of the most powerful strategies to mitigate the impacts of climate change by reducing energy demand, which in turn reduces the emissions of Green House Gases (GHG), as well as reducing the burden on the supply side renewable generation expansion. Because electric motors systems represent such a large share of the overall electricity consumption (over 50%), large savings potential could be made available by the use of energy-efficient motor systems both in new installations and by accelerating the replacement of old inefficient motors. Since electric motors are very reliable, their lifetime is long (according to recent studies it may exceed 20 years) which translates into a very inefficient existing stock despite worldwide policy efforts. This paper analyzes the current efficiency of the installed stock and the causes for its low efficiency, possible policy options to increase its the efficiency, the role of new technologies and improvements possible by targeting the entire motor system at the time of motor replacement. The paper presents an innovative analysis of the estimated impact of increasing the uptake of high-efficiency motors and motor systems; effective policies could translate into 100 TWh/year in the European Union if additional measures, such as addressing oversizing, proper controls (VSDs) and digitisation, are also implemented. If similar measures were adopted globally, the savings triggered could be at least tenfold reaching over 1000 TWh/year. [ABSTRACT FROM AUTHOR]

Currently, studies on the energy efficiency of manufacturing systems usually lack synthetic and systematic techniques. In this paper, a holistic framework is demonstrated in order to achieve more sustainable manufacturing, which covers machine-level, system-level and life-cycle-level energy efficiency techniques. Based on these, the mechanism of how energy consumption is affected by machining processes and system operation is analyzed to achieve a comprehensive decision on energy efficiency optimization. Four main topics are included in this paper: (1) Hierarchical sustainability goals and metrics for energy-efficient manufacturing; (2) Machine-level machining processes optimization for energy efficiency enhancement; (3) System-level innovations for efficient consumption management; (4) Life-cycle level energy flow modeling and energy recycling strategy. An automotive engine manufacturing system is taken as an example to build a concrete understanding of the application of the framework. Moreover, this holistic framework establishes the theoretical basis for promoting the energy efficiency of automotive engine manufacturing systems. Furthermore, the proposed techniques can provide decision-making support for achieving sustainable manufacturing in a wider scope of mechanical manufacturing. [ABSTRACT FROM AUTHOR]

This paper investigates relative aggregate energy efficiency for a panel of 39 developing countries by econometrically estimating an energy-demand function (EDF) using the stochastic frontier analysis (SFA) approach to provide relative energy efficiency scores over the period 1989 to 2008. Energy efficiency is arguably difficult to define or even conceptualise with several interpretations in the literature but here it is based on an economists' perspective of efficiency. Hence, the estimates of 'true' energy efficiency found in the paper using this approach approximate the economically efficient use of energy capturing both technical and allocative efficiency and the results confirm that energy intensity should not be considered as a de facto standard indicator of energy efficiency. While, by controlling for a range of socio-economic factors, the measurements of energy efficiency obtained by the analysis are deemed more appropriate and hence it is argued that this analysis should be undertaken to avoid potentially misleading advice to policy makers. This study contributes to the literature since it is, as far as is known, the first attempt to apply the benchmarking parametric stochastic frontier technique to econometrically estimate energy efficiency for a large panel of only developing counties around the world. Moreover, the results from such analysis are arguably particularly relevant in a world dominated by environmental concerns, especially in the aftermath of energy price increase as a result of the unrest in Ukraine. [ABSTRACT FROM AUTHOR]

The HVAC (Heating, Ventilation, and Air Conditioning) system is an important component of a building's energy consumption, and its primary function is to provide a comfortable thermal environment for occupants. Accurate prediction of occupant thermal comfort is essential for improving building energy utilization as well as health and work efficiency. Therefore, the development of accurate thermal comfort prediction models is of great value. Deep learning based on data-driven techniques has excellent potential for predicting thermal comfort due to the development of artificial intelligence. However, the inability to obtain large quantities of detailed thermal comfort labeling data from residents presents a substantial challenge to the modeling endeavor. This paper proposes a building-to-building transfer learning framework to make deep learning models applicable in data-limited interior building environments, thereby resolving the issue and enhancing model predictive performance. The transfer learning method (TL) is applied to a novel technology dubbed the Transformer model, which has demonstrated outstanding performance in data trend prediction. The model exploits the spatiotemporal relationship of data regarding thermal comfort. Experiments are conducted using the source dataset (Scales project dataset and ASHRAE RP-884 dataset) and the target dataset (Medium US office dataset), and the results show that the proposed TL-Transformer achieves 62.6% accuracy, 57% precision, and a 59% F1 score, and the prediction performance is better than other existing methods. The model is useful for predicting indoor thermal comfort in buildings with limited data, and its validity is verified by experimental results. [ABSTRACT FROM AUTHOR]

Background: Although many works focus on increasing the energy efficiency of buildings, there are still a number of problems that need to be solved, such as reducing heat losses at the window-to-wall interface, especially since the requirements for saving energy used for heating/cooling rooms are constantly increasing. This paper analyses the impact of the material parameters of the external wall and the window installation in the insulation layer on the size of thermal bridges around the window. Purpose: The aim of the work is to demonstrate the benefits resulting from the correct installation of the window, the appropriate location of the window in relation to the face of the external wall, as well as the correct selection of construction materials. Methodology: In order to show the improvement in the energy efficiency of buildings, an analysis of the heating/cooling energy consumption was carried out for the selected buildings. The thermal and humidity analyses were carried out using TRISCO program, while the economic analysis was performed using the Audytor OZC program. Results: It was found that the proposed system of window installation in the thermal insulation layer reduced the annual heating demand by at least 10% on average. Conclusions: It has been shown that the method of window installation and the type of the wall structural materials are interrelated and therefore should be considered simultaneously. Their proper selection allows for a reduction in the amount of energy needed for heating and cooling buildings, and thus a reduction of heating/cooling costs, as well as limiting greenhouse gas emissions. [ABSTRACT FROM AUTHOR]

A wet electrostatic precipitator (WESP) is typically installed downstream of wet flue gas desulfurization (WFGD) to remove fine particles and sulfuric acid mists from flue gases in coal-fired power plants. The emission reduction characteristics of multiple pollutants and the energy consumption data of 214 sets of WESPs (94 sets of metal plate WESPs, 111 sets of conductive Fiber Reinforced Plastic WESPs, and 9 sets of flexible plate WESPs) were tested and analyzed, and the results showed that: WESPs had a high removal efficiency on PM, PM2.5, SO3, droplets and Hg, and mostly concentrated in ≥75%, ≥70%, ≥60%, ≥70% and ≥40%, respectively. The outlet pollutant concentrations were mostly concentrated in ≤5 mg/m3, ≤3 mg/m3, ≤5 mg/m3, ≤15 mg/m3 and ≤5 μg/m3, respectively. Specific power consumption and specific water consumption were concentrated in the range of 0.5~2.5 × 10−4 kWh/m3 and ≤10 × 10−6 t/m3. The correlation analysis of multiple pollutant's removal performance was studied and the quantitative evaluation index requirements of high efficiency WESPs were determined in this paper. The high efficiency indexes of WESPs, such as PM emission concentration, SO3 emission concentration, PM removal efficiency, SO3 removal efficiency, pressure drop, air leakage rate and specific power consumption, were ≤2.50 mg/m3, ≤2.50 mg/m3, ≥90%, ≥85%, ≤200 Pa, ≤0.5% and ≤1.3 × 10−4 kWh/m3, respectively. The high efficiency indexes of specific water consumption for metal plate WESPs and FRP WESPs were ≤2.50 and ≤0.66 × 10−6 t/m3, respectively. This study can provide valuable reference for the following energy conservation and efficiency improvement of ultra-low emission units. [ABSTRACT FROM AUTHOR]

The Smart Readiness Indicator (SRI) is a newly developed framework that measures a building's technological readiness to improve its energy efficiency. The integration of data obtained from this framework with data derived from Building Information Modeling (BIM) has the potential to yield compelling results. This research proposes an algorithm for a Recommendation System (RS) that uses SRI and BIM data to advise on building energy-efficiency improvements. Following a modular programming approach, the proposed system is split into two algorithmic approaches linked with two distinct use cases. In the first use case, BIM data are utilized to provide thermal envelope enhancement recommendations. A hybrid Machine Learning (ML) (Random Forest–Decision Tree) algorithm is trained using an Industry Foundation Class (IFC) BIM model of CERTH'S nZEB Smart Home in Greece and Passive House database data. In the second use case, SRI data are utilized to develop an RS for Heating, Ventilation, and Air Conditioning (HVAC) system improvement, in which a process utilizes a filtering function and KNN algorithm to suggest automation levels for building service improvements. Considering the results from both use cases, this paper provides a solid framework that exploits more possibilities for coupling SRI with BIM data. It presents a novel algorithm that exploits these data to facilitate the development of an RS system for increasing building energy efficiency. [ABSTRACT FROM AUTHOR]

Energy usage in robotic applications is rapidly increasing as industrial robot installations grow. This research introduces a novel approach, using the rapidly exploring random tree (RRT)-based scheme for optimizing the robot's motion planning and minimizing energy consumption. Sampling-based algorithms for path planning, such as RRT and its many other variants, are widely used in robotic motion planning due to their efficiency in solving complex high-dimensional problems efficiently. However, standard versions of these algorithms cannot guarantee that the generated trajectories are always optimum and mostly ignore the energy consumption in robotic applications. This paper proposes an energy-efficient industrial robotics motion planning approach using the novel flight cost-based RRT (FC-RRT*) algorithm in pick-and-place operation to generate nodes in a predetermined direction and then calculate energy consumption using the circle point method. After optimizing the motion trajectory, power consumption is computed for the rotary axes of a six degree of freedom (6DOF) serial type of industrial robot using the work–energy hypothesis for the rotational motion of a rigid body. The results are compared to the traditional RRT and RRT* (RRT-star) algorithm as well as the kinematic solutions. The experimental results of axis indexing tests indicate that by employing the sampling-based FC-RRT* algorithm, the robot joints consume less energy (1.6% to 16.5% less) compared to both the kinematic solution and the conventional RRT* algorithm. [ABSTRACT FROM AUTHOR]

Nearly 60% of commercial customers are connected to a low-voltage network in Poland with a contractual capacity of more than 40 kW and are assigned a fixed tariff with flat prices for the whole year, no matter the usage volume. With smart meters, more data about how businesses use energy are becoming available to both energy providers and customers. This enables innovation in the structure and type of tariffs on offer in the energy market. Customers can explore their usage patterns to choose the most suitable tariff to benefit from lower prices and thus generate savings. In this paper, we analyzed whether customers' electricity usage matched their optimal tariff and further investigated which of them could benefit or lose from switching the tariff based on the real dataset with the hourly energy readings of 1212 commercial entities in Poland recorded between 2016 and 2019. Three modelling approaches, i.e., the k-nearest neighbors, classification tree and random forest, were tested for optimal tariff classification, while for the benchmark, we used a simple approach, in which the tariff was proposed based on the customers' previous electricity usage. The main findings from the research are threefold: (1) out of all the analyzed entities, on average, 76% of them could have benefited from the tariff switching, which suggests that customers may not be aware of the tariff change benefits, or they had chosen a tariff plan that was not tailored to them; (2) a random forest model offers a viable approach to accurate tariff classification; (3) the policy implication from the research is the need to increase the customers' awareness about the tariffs and propose reliable tools for selecting the optimal tariff. [ABSTRACT FROM AUTHOR]

With the explosive growth of micro-video applications, the transmission burden of fronthaul and backhaul links is increasing, and meanwhile, a lot of energy consumption is also generated. For reducing energy consumption and transmission delay burden, we propose a cell-free massive multiple-input multiple-output (CF-mMIMO) system in which the cache on the access point (AP) is used to reduce the load on the link. In this paper, a total energy efficiency (EE) model of a cache-assisted CF-mMIMO system is established. When optimizing EE, forming the co-operation cluster is critical. Therefore, we propose an energy-efficient joint design of content caching, AP clustering, and low-resolution digital-to-analog converter (DAC) in a cache-assisted CF-mMIMO network based on deep reinforcement learning. This scheme can effectively cache content in APs and select the appropriate DAC resolution. Then, taking into account the channel state information and user equipment (UE)'s content request preference, a deep deterministic policy gradient algorithm is used to jointly optimize the cache strategy, AP clustering, and DAC resolution decisions. Simulation results show that the energy efficiency of the proposed scheme is 4% higher than that of other schemes without the resolution optimization and is much higher than that of the only AP clustering without the joint design of content caching and channel quality. [ABSTRACT FROM AUTHOR]