Search

Ye et al. [[5]] proposed a simultaneous fault diagnosis method based on hierarchical multi-label classification and a sparse Bayesian extreme learning machine to identify the single failure and simultaneous failures of the main reducer and determine the probability of each failure mode. 10.3390/app13084655 4 Gu Y., Zhang Y., Yang M., Li C. Motor On-Line Fault Diagnosis Method Research Based on 1D-CNN and Multi-Sensor Information. Gu et al. [[4]] proposed a model for motor fault diagnosis based on deep learning and multi-sensor information fusion, including the steps of data layer fusion, feature layer fusion, and fault classification, and finally realized the fast and accurate diagnosis of motor faults. [Extracted from the article]

As one of the most important components in rotating machinery, it’s necessary and essential to monitor the rolling bearing operating condition to prevent equipment failure or accidents. However, in vibration signal processing, the bearing initial fault detection under background noise is quite difficult. Therefore, in this paper a new feature extraction method combining sparse reconstruction and Multiscale Dispersion Entropy (MDErms) is proposed. Firstly, the Sliding Matrix Sequences (SMS) truncation and sparse reconstruction by Hankel-matrix are applied to the vibration signal. Then MDErms is utilized as a characteristic index of vibration signal, which is suitable for a short time series. Additionally, the MDErms is employed in the sparse reconstructed matrix sequences to achieve the Multiscale Fusion Entropy Value Sequence (MFEVS). The MFEVS keeps the fault potential feature information in different scales and is superior in distinguishing fault periodic impulses from heavy background noise. Finally, the designed FIR bandpass filter based on the MFEVS, shows prominent features in denoising and detecting weak bearing faults, which is separately verified by simulation studies and artificial fault experiments in different cases. By comparison with traditional methods like EEMD, Wavelet Packet (WP), and fast kurtogram, it can be concluded that the proposed method has a remarkable ability in removing noise and detecting rolling bearing faint fault. [ABSTRACT FROM AUTHOR]

Due to planetary movement of planet gears, the vibration signal perceived by a stationary sensor is modulated and difficult to diagnose. This paper proposed a vibration separation methodology compensated by a time-varying transfer function (TVTF-VS), which is a further development of the vibration separation (VS) method in the diagnosis of non-hunting tooth planetary gearboxes. On the basis of VS, multi-teeth VS is proposed to extract and synthesize the meshing signal of a planet gear using a single transducer. Considering the movement regularity of a planetary gearbox, the time-varying transfer function (TVTF) is represented by a generalized expression. The TVTF is constructed using a segment of healthy signal and an evaluation indicator is established to optimize the parameters of the TVTF. The constructed TVTF is applied to overcome the amplitude modulation effect and highlight fault characteristics. After that, experiments with baseline, pitting, and compound localized faults planet gears were conducted on a non-hunting tooth planetary gearbox test rig, respectively. The results demonstrate that incipient failure on a planet gear can be detected effectively, and relative location of the local faults can be determined accurately. [ABSTRACT FROM AUTHOR]

As an essential part of the transmission system, gearboxes are considered as a major source of vibration. Signal identification of gear vibration is necessary for online monitoring of the mechanical systems. However, in engine-gearbox systems, the ignition impact of the engine is strong, so that the gear vibration is generally submerged. To overcome this issue, the resonance-based signal sparse decomposition (RSSD) method is used in this paper based on different oscillatory behaviors of the gear meshing impact and the engine ignition impact. To improve the accuracy of RSSD under interferences, the meshing frequency energy ratio (MF–ER) index is introduced into RSSD to adaptively choose the decomposition parameters. Before applying the RSSD method, the auto-regression (AR) model is used as a pre-whitening step to eliminate the normal gear meshing vibration, which improves the decomposition performance of RSSD. The effectiveness of the proposed AR-ORSSD (AR-based optimized RSSD) algorithm is tested using both simulated signals and measured vibration signals from an engine-gearbox system in a forklift. Comparisons were made with the RSSD algorithm based on a genetic algorithm. Experimental results indicate that the AR-ORSSD algorithm is superior at identifying gear vibration signals especially when under strong interferences. [ABSTRACT FROM AUTHOR]