Search

Antimicrobial resistance poses a significant challenge to public health globally, leading to increased morbidity and mortality. AMR surveillance involves the systematic collection, analysis, and interpretation of data on the occurrence and distribution of AMR in humans, animals, and the environment for action. The West African Health Organization, part of the Economic Community of West African States (ECOWAS), is committed to addressing AMR in the region. This paper examines the status of AMR surveillance in ECOWAS countries using available WHO data from the TrACSS survey and GLASS enrollments. The analysis reveals that while progress has been made, significant challenges remain. Twelve of the fifteen ECOWAS countries are enrolled in GLASS, and ten have developed national action plans (NAPs) for AMR. However, there is a need to ensure all countries fully implement their NAPs, continue reporting to GLASS, and use the data for evidence-based actions and decision making. Surveillance systems for AMR and antimicrobial consumption/use vary across countries with some demonstrating limited capacity. All countries, except Cabo Verde, reported having a reference laboratory for AMR testing. Strengthening laboratory capabilities, data management and use, and multisectoral coordination are crucial for effective AMR surveillance and response. Based on the findings and the regional context, it is essential to prioritize capacity building, data utilization, and the adoption of standardized guidelines for AMR surveillance. Collaboration among ECOWAS countries, the WAHO, and international partners is essential to address AMR comprehensively. Ensuring a consistent supply of essential antimicrobial medications and reagents is vital. [ABSTRACT FROM AUTHOR]

Modern solutions for precise fault localisation in Low Voltage (LV) Distribution Networks (DNs) often rely on costly tools such as the micro-Phasor Measurement Unit (μ PMU), which is potentially impractical for the large number of nodes in LVDNs. This paper introduces a novel fault detection technique using a distribution network digital twin without the use of μ PMUs. The Digital Twin (DT) integrates data from Smart Meters (SMs) and network topology to create an accurate replica. In using SM voltage-magnitude readings, the pre-built twin compiles a database of fault scenarios and matches them with their unique voltage fingerprints. However, this SM-based voltage-only approach shows only a 70.7% accuracy in classifying fault type and location. Therefore, this research suggests using the cables' Currents Symmetrical Component (CSC). Since SMs do not provide direct current data, a Machine Learning (ML)-based regression method is proposed to estimate the cables' currents in the DT. Validation is performed on a 41-node LV distribution feeder in the Scottish network provided by the industry partner Scottish Power Energy Networks (SPEN). The results show that the current estimation regressor significantly improves fault localisation and identification accuracy to 95.77%. This validates the crucial role of a DT in distribution networks, thus enabling highly accurate fault detection when using SM voltage-only data, with further refinements being conducted through estimations of CSC. The proposed DT offers automated fault detection, thus enhancing customer connectivity and maintenance team dispatch efficiency without the need for additional expensive μ PMU on a densely-noded distribution network. [ABSTRACT FROM AUTHOR]

Patients diagnosed with cancer receive different types of treatments based on the type and the level of the tumour. An emerging treatment that differs from well-developed systematic therapies (i.e., Chemotherapy, Radiotherapy, and Immunotherapy) is Tumour Treating Field (TTF) treatment. Tumour behaviour under TTF treatment varies based on the electric field intensity; the process of exposing the tumour cells to an electric field is called electroporation. From the electrical perspective, the most efficient method for electroporation is to use a voltage pulse generator. Several pulse generator topologies have been introduced to overcome existing limitations, mitigate the drawbacks of classical generators, and provide more controllable, flexible, and portable solid-state voltage pulse generators. This paper provides a review of cancer treatment using TTF and highlights the key specifications required for efficient treatment. Additionally, potential voltage pulse generators are reviewed and compared in terms of their treatment efficacy and efficient use of electrical power. [ABSTRACT FROM AUTHOR]

AMR is a major public health concern that calls for extensive work and a multidisciplinary team approach. The high prevalence of infectious diseases in African nations leads to widespread antibiotic usage and eventual antimicrobial resistance, which has significant negative effects on people's health, the economy, and society. Additionally, inadequate or nonexistent antimicrobial drug regulations, inappropriate prescription practices, and restrictions on public health prevention initiatives such as immunization, water and sanitation, and sexual health may all contribute to the emergence of AMR. Despite the need for laboratory quality assurance, many African laboratories confront substantial difficulties in implementing efficient quality assurance programs. AMR surveillance in Africa is hampered by a lack of laboratory capacity, insufficient data collection and analysis, and poor stakeholder collaboration. Several initiatives and programs, including the World Health Organization's Global Antimicrobial Resistance and Use Surveillance System (GLASS), the Africa Centres for Disease Control and Prevention (Africa CDC) Antimicrobial Resistance Surveillance Network (AMRSNET), and the Fleming Fund, a UK government initiative aimed at tackling AMR in low- and middle-income countries, have been established to strengthen AMR surveillance in Africa and globally. [ABSTRACT FROM AUTHOR]

Inverters with Quasi-Z-Source Networks (QZSN) provide DC-DC boosting and DC-AC conversion in a single stage. It offers reduced cost, complexity, and volume compared with the classical two-stage conversion system, which is composed of a boost converter followed by a Voltage-Source-Inverter (VSI). Further, QZSI provides superior conversion characteristics for single-stage grid-connected photovoltaic transformerless systems. However, the absence of galvanic isolation in these systems makes it possible to allow leakage current through these systems' parasitic capacitances due to the high-frequency Common-Mode Voltage (CMV) generated by the Pulse Width Modulation (PWM) nature of the inverter output voltages. As a result of this current, critical safety issues may arise with PV systems. Many PWM techniques have been presented in recent years for QZSIs. This paper is intended to provide a comprehensive analysis and review study of the characteristics of most of these PWM techniques in terms of CMV and leakage currents. In this study, closed-form equations have been derived to determine the effective CMV and leakage current analyses for all modulation techniques. Analytical and simulation approaches are used to identify schemes with the lowest CMV and current leakage effects. Moreover, the experimental setup is presented by applying the Simple-Boost Modified Space Vector Modulation (SB-MSVM) technique. [ABSTRACT FROM AUTHOR]

Power converters generate switching common mode voltage (CMV) through the pulse width modulation (PWM). Several problems occur in the drive systems due to the generated CMV. These problems can be dangerous to the insulation and bearings of the electric machine windings. In recent years, many modulation methods have been developed to reduce the CMV in multiphase machines. Symmetrical nine-phase machines with single-neutral are considered in this paper. In this case, conventional PWM uses eight active vectors of different magnitudes in combination with two zero states in a switching cycle, and this generates maximum CMV. This paper proposes two PWM schemes to reduce the CMV in such a system. The first scheme is called active zero state (AZS). It replaces the zero vectors with suitable opposite active vectors. The second scheme uses ten large active vectors during switching and is called SVM-10L. Compared with conventional strategies, the AZS reduces the peak CMV by 22.2%, and the SVM-10L reduces the peak CMV by 88.8%. Moreover, this paper presents a carrier-based implementation of the proposed schemes to simplify the implementation. The proposed schemes are assessed using simulations and experimental studies for an induction motor load under different case studies. [ABSTRACT FROM AUTHOR]

Due to their many advantages over their counterparts, such as Z-source inverters (ZSIs), split-source inverters (SSIs) have recently received much attention as single-stage boost inverters. This paper discusses a multiphase version of the SSI topology for the first time. Among multiphase systems undergoing a revolution in the research area, five-phase motor drives are a relatively practical selection in industrial applications. Therefore, this paper focuses on a five-phase SSI as an example. The topology, operating principles, modulation techniques, and performance analysis of the analyzed topology are introduced. A modified space-vector modulation (MSVM) scheme is developed to eliminate low-frequency ripples in the input current. There is also a detailed analysis and graphical evaluation of the output currents ripples using the space-vector approach. It is evident that multiphase SSI is suitable for motor drives, especially when a high-output voltage gain is required. In addition to having a nearly identical ripple in output current to a conventional VSI, it has the benefit of performing the boosting action in a single stage with fewer passive components and a low ripple in input current. Finally, the simulation and experimental results have been conducted to demonstrate the viability of the multiphase SSI studied in the theoretical study and analysis. [ABSTRACT FROM AUTHOR]

This paper proposes a buffered microgrid with a modular grid interface consisting of a modular back-to-back converter. The proposed method provides a flexible strategy that enables both the load and generation expansion of the microgrid, with no sizing constraints on the initial stage. The method maintains the physical separation of the buffered microgrid from the grid by using back-to-back converters, which ensures a safe, secure and seamless operation in both islanded and grid-connected operation modes. The proposed modular structure allows an energy exchange prioritization either between the energy storage systems and the grid or between the energy storage units themselves, depending on the recommended/desired operational strategy. The prioritizations are achieved by using sets of dead zones in the control of the interfacing converters. In order to control the voltage and frequency, an inverse-droop-based dq-frame current control method was implemented in PSCAD/EMTDC to substantiate the proposed method. The simulation results of different scenarios show the operational flexibility, control simplicity and communication-free operation of the microgrid with different types of sources. [ABSTRACT FROM AUTHOR]

Environmental pollution is considered to be one of the main concerns in the construction industry. Environmental pollution has become a major challenge to construction projects due to the huge amount of pollution caused by construction projects. There are different types of environmental impact indicators, such as the greenhouse gas (GHG) footprint, eutrophication potential (EP), acidification potential (AP), human health (HH) particulate, ozone depletion, and smog. Each of these environmental impact indicators can be linked to different phases of the construction projects. The overall environmental impact indicators can be divided into direct, indirect, and operational emissions. This paper presents a Building Information Modeling (BIM)-based methodology for the assessment of environmental impacts in road construction projects. The model takes into account the overall life cycle of the road construction project, which is divided into: manufacturing phase, transportation phase, construction phase, maintenance phase, operational phase, recycling phase, and deconstruction phase. A case study is presented to demonstrate the applicability of the proposed model. The proposed model solves a major problem for road construction project teams who want to assess the environmental impact indicators associated with their project prior to the start of the execution of their projects. [ABSTRACT FROM AUTHOR]