Search

The structure of an aqueous solution of potassium dihydrogen phosphate (KH2PO4, KDP) was studied by small-angle X-ray scattering (SAXS) and molecular dynamics (MD). According to SAXS data, the octameric species (KH2PO4)8 are formed in solution in addition to K+, (H2PO4)−, and KH2PO4, while the presence of other types of oligomers is not observed. When the temperature drops below the saturation temperature (~60 °C), the volume fraction of octamers increases sharply, reaching 50% at 4 °C. The results of MD calculations of the temporal stability relationships of dimers (KH2PO4)2, tetramers (KH2PO4)4, and octamers (KH2PO4)8 show that the dimers and tetramers disintegrate rapidly (50–100 ps), while the octamers remain stable. A comparative analysis of the bonds between the octamers and the KDP crystal lattice was carried out when the octamer was inserted during crystal growth in the directions [001] and [100]. The possible relationship of the obtained results with the changes in the anisotropy of growth rates (habitus) of KDP crystals at different degrees of supersaturation is discussed. [ABSTRACT FROM AUTHOR]

Rare-earth sodium- and fluorine-substituted molybdates with the Na0.65La4.35Mo3O15.81±δF0.07±ε composition were synthesized for the first time as single crystals. An accurate X-ray diffraction analysis of three samples at room temperature showed that the obtained crystals are isostructural to undoped cubic compounds of the Ln5Mo3O16+δ family (space group Pn 3 ¯ n). Sodium cations partially occupy one of the two lanthanum positions and center the more distorted LaO8 polyhedra, while fluorine anions occupy over-stoichiometric oxygen positions in the vast interstices (cavities) of the structure. The partial substitution of fluorine atoms for oxygen ones affects the transport characteristics of compounds by activating the oxygen atoms in the anionic subsystem due to the effect of supplementary electrostatic repulsion between anions of different types. [ABSTRACT FROM AUTHOR]

For the synthesis of ionogels containing microcrystalline cellulose (MCC) and Na-bentonite (Na-Bent), ionic liquid (IL) 1-butyl-3-methylimidazolium acetate was used as an MCC solvent. Characterization and research of the physicochemical properties of the synthesized materials were carried out using methods such as SEM, WAXS, thermal analysis, FTIR, conductometry, and viscometry. WAXS analysis showed an increase in the interlayer distance of Na-bentonite in composites due to the intercalation of IL molecules. Based on the data on the characteristic temperatures of thermal degradation, enhanced thermal stability of triple IL/Na-Bent/MCC ionogels was revealed compared to that for cellulose-free systems. It was found that the electrical conductivity of both triple IL/Na-Bent/MCC and binary IL/MCC ionogels was non-monotonous. The data obtained can be used in the formation of multifunctional coatings with enhanced thermal stability. [ABSTRACT FROM AUTHOR]

Structural features of new mixed bismuth-containing samarium iron–aluminium borate single crystals Sm1−xBixFe3−yAly(BO3)4 (x = 0.05–0.07, y = 0–0.28) were studied using X-ray diffraction analysis based on aluminium content and temperature in the range 25–500 K. The crystals were grown using the solution-in-melt technique with Bi2Mo3O12 in a flux. The composition of the single crystals was analyzed using energy-dispersive X-ray fluorescence and energy-dispersive X-ray elemental analysis. Temperature dependencies of Sm1−xBixFe3−yAly(BO3)4 unit-cell parameters were studied. Negative thermal expansion was identified below 100 K and represented by characteristic surfaces of the thermal expansion tensor. (Sm,Bi)–O, (Sm,Bi)–(Fe,Al), (Fe,Al)–(Fe,Al), and (Fe,Al)–O interatomic distances decreased with the addition of aluminium atoms. An increase in the (Fe,Al)–(Fe,Al) intrachain bond length at low temperatures in the magnetically ordered state weakened this bond, whereas a decrease in the (Fe,Al)–(Fe,Al) interchain distance strengthened super-exchange paths between different chains. It was found that the addition of aluminium atoms influenced interatomic distances in Sm1−xBixFe3−yAly(BO3)4 much more than lowering the temperature from 293 K to 25 K. The effect of aluminium doping on magnetoelectric properties and structural symmetry of rare-earth iron borates is also discussed. [ABSTRACT FROM AUTHOR]

Rare-earth fluorine-containing molybdates of the Ln5Mo3O16+δ oxygen–electron conductor family with the LiLa4Mo3O15F composition were synthesized for the first time as single crystals by the flux method. An accurate X-ray diffraction analysis of the obtained crystals was carried out at 20 and −183 °C. The LiLa4Mo3O15F compound is isostructural to the fluorine-free analogue with a cubic structure (space group Pn 3 ¯ n). It is shown that lithium atoms replace one of the two positions of lanthanum in the more distorted LaO8 polyhedron. According to X-ray diffraction analysis, fluorine atoms replace the positions of over-stoichiometric oxygen located in the vast cavities of the structure. So, fluorine anions can promote the interstitial conductivity of F-containing LiLa4Mo3O15F molybdates. [ABSTRACT FROM AUTHOR]

One of the most important problems in the development of proton exchange membrane fuel cells remains the selection of an efficient electrocatalyst support capable of providing a low loading of active metal with minimal changes in the electrochemical surface, electronic conductivity, and activity. In this work, carbon nanotube arrays (CNTAs) grown directly on commercial gas diffusion layers (GDLs) are used to form electrodes of a new type. The CNTAs are used in the electrode as a microporous layer. The catalytic layer is formed in the microporous layer by a method that does not destroy the carbon support structure and consists of the controlled impregnation of CNTAs with the Pt-precursor with subsequent reduction in platinum particles in the surface volume of the layer. The resulting electrode was studied by scanning/transmission electron microscopy and Raman spectroscopy. This electrode provides increased electrical conductivity of the layer and can also improve stability and longer service life due to the enhanced adhesion of carbon materials to the GDL. [ABSTRACT FROM AUTHOR]

The fast catalytic pyrolysis of polystyrene in the hydrocarbon medium (light and heavy cycle oil) over zeolite catalysts at 450–550 °C was investigated. The influence of reaction conditions (medium, temperature, vapor residence time, polystyrene concentration) on polymer conversion and product distribution was studied. It was found that the polymer conversion is close to 100%, while ethylbenzene, benzene, and toluene are the main products of its transformation. The maximum yield of ethylbenzene (80%) was achieved at 550 °C, vapor residence time 1–2 s, polystyrene concentration 10%, and heavy cycle oil as the medium. The influence of zeolite topology on product distribution was explored. The possible mechanism of polystyrene pyrolysis was proposed. [ABSTRACT FROM AUTHOR]

Elementary building blocks for the growth of KDP crystals were established. The solution of potassium dihydrogen phosphate (KH2PO4–KDP) has been experimentally studied by the small-angle X-ray scattering (SAXS) method. The analysis of SAXS data in the temperature range of 2.5–90 °C using a set of models of 3D fragments of the crystal structure showed that the saturated solution contains above K+, H2PO4− and KH2PO4 monomers, as well as mainly octamers. The 3D model of the octamer isolated from the crystal structure has dimensions of 17.443 Å along the [001] axis and 5.963 Å along the [100] and [010] axes. As the temperature is decreased, starting from the saturation temperature of the solution, the volume fraction of octamers sharply increases while the volume fraction of monomers decreases. The results indicate that the monomers and octamers represent major components in the solution with the presence of minor populations of other oligomers. The significant dominance of octamers in the supersaturated solution indicates that they are elementary building blocks for the growth of KDP crystals of tetragonal modification. [ABSTRACT FROM AUTHOR]

Simple Summary: Oncolytic viruses infect tumor cells and trigger their death and elimination by the immune system. Several viral strains have been introduced into clinical practice. However, their therapeutic efficacy remains controversial. Here, we show that Coxsackievirus B5 (CVB5) causes the death of glioblastoma cells. Interestingly, 2-deoxyglucose, an inhibitor of glycolysis augments the oncolytic effect induced by CVB5. This synergism occurs in cells with a high respiratory phenotype and increased glycolytic capacity. Thus, 2-deoxyglucose or its analogs can be evaluated further as drugs to potentiate the oncolytic effects of enteroviruses against glioblastoma multiforme. Glioblastoma multiforme (GBM) is one of the most common types of brain tumor. Despite intensive research, patients with GBM have a poor prognosis due to a very high rate of relapse and significant side effects of the treatment, with a median survival of 14.6 months. Oncolytic viruses are considered a promising strategy to eliminate GBM and other types of cancer, and several viruses have already been introduced into clinical practice. However, identification of the factors that underly the sensitivity of tumor species to oncolytic viruses or that modulate their clinical efficacy remains an important target. Here, we show that Coxsackievirus B5 (CVB5) demonstrates high oncolytic potential towards GBM primary cell species and cell lines. Moreover, 2-deoxyglucose (2DG), an inhibitor of glycolysis, potentiates the cytopathic effects of CVB5 in most of the cancer cell lines tested. The cells in which the inhibition of glycolysis enhanced oncolysis are characterized by high mitochondrial respiratory activity and glycolytic capacity, as determined by Seahorse analysis. Thus, 2-deoxyglucose and other analogs should be considered as adjuvants for oncolytic therapy of glioblastoma multiforme. [ABSTRACT FROM AUTHOR]

The multiferroic RFe3(BO3)4 family is characterized by diverse magnetic, magnetoelectric, and magnetoelastic properties, the fundamental aspects of which are essential for modern electronics. The present research, using single-crystal X-ray diffraction (XRD) and Mössbauer spectroscopy (MS) in the temperature range of 25–500 K, aimed to analyze the influence of local atomic coordination on magnetoelectric properties and exchange and super-exchange interactions in RFe3(BO3)4. Low-temperature, single-crystal XRD data of the magnetically ordered phase of RFe3(BO3)4 at 25 K, which were obtained for the first time, were supplemented with data obtained at higher temperatures, making it possible to draw conclusions about the mechanism of the structural dynamics. It was shown that, in structures with R = Gd, Ho, and Y (low-temperature space group P3121), a shift in oxygen atoms (O2, second coordination sphere of R atoms) was accompanied by rotation of the B2O3 triangle toward R atoms at low temperatures, and by different rearrangements in iron chains of two types, in contrast to Nd and Sm iron borates (space group R32). These rearrangements in the structures of space group P3121 affected the exchange and super-exchange paths at low temperatures. The MS results confirm the influence of the distant environment of atoms on the magnetoelectric properties of rare-earth iron borates at low temperatures. [ABSTRACT FROM AUTHOR]

Cancer cell lines responded differentially to type I interferon treatment in models of oncolytic therapy using vesicular stomatitis virus (VSV). Two opposite cases were considered in this study, glioblastoma DBTRG-05MG and osteosarcoma HOS cell lines exhibiting resistance and sensitivity to VSV after the treatment, respectively. Type I interferon responses were compared for these cell lines by integrative analysis of the transcriptome, proteome, and RNA editome to identify molecular factors determining differential effects observed. Adenosine-to-inosine RNA editing was equally induced in both cell lines. However, transcriptome analysis showed that the number of differentially expressed genes was much higher in DBTRG-05MG with a specific enrichment in inflammatory proteins. Further, it was found that two genes, EGFR and HER2, were overexpressed in HOS cells compared with DBTRG-05MG, supporting recent reports that EGF receptor signaling attenuates interferon responses via HER2 co-receptor activity. Accordingly, combined treatment of cells with EGF receptor inhibitors such as gefitinib and type I interferon increases the resistance of sensitive cell lines to VSV. Moreover, sensitive cell lines had increased levels of HER2 protein compared with non-sensitive DBTRG-05MG. Presumably, the level of this protein expression in tumor cells might be a predictive biomarker of their resistance to oncolytic viral therapy. [ABSTRACT FROM AUTHOR]

In this study, an ionic liquid (IL), 1-butyl-3-methylimidazolium acetate, was used to prepare ionogels with microcrystalline cellulose (MCC) and halloysite (Hal). SEM, XRD, TG, DSC, FTIR spectroscopy, conductometry and mechanical tests were used to study the morphology, structure, thermal behaviour and electrophysical and mechanical characteristics of synthesised ionogels. XRD analysis showed a slight decrease in the interlayer space of halloysite in ionogels containing MCC, which may have been associated with the removal of residual water molecules resulting from hydrophilic IL anions and polymer macromolecules. A change in conductivity and glass-transition temperature of the ionic liquid was revealed due to intercalation into halloysite (a confinement effect) and modification with cellulose. For triple IL/Hal/MCC ionogels, the characteristic thermal degradation temperatures were higher than the corresponding values for IL/Hal composites. This indicates that the synthesised IL/Hal/MCC ionogels are characterised by a greater thermal stability than those of IL/Hal systems. [ABSTRACT FROM AUTHOR]

It is well known that blood lipoproteins (LPs) are multimolecular complexes of lipids and proteins that play a crucial role in lipid transport. High-density lipoproteins (HDL) are a class of blood plasma LPs that mediate reverse cholesterol transport (RCT)—cholesterol transport from the peripheral tissues to the liver. Due to this ability to promote cholesterol uptake from cell membranes, HDL possess antiatherogenic properties. This function was first observed at the end of the 1970s to the beginning of the 1980s, resulting in high interest in this class of LPs. It was shown that HDL are the prevalent class of LPs in several types of living organisms (from fishes to monkeys) with high resistance to atherosclerosis and cardiovascular disorders. Lately, understanding of the mechanisms of the antiatherogenic properties of HDL has significantly expanded. Besides the contribution to RCT, HDL have been shown to modulate inflammatory processes, blood clotting, and vasomotor responses. These particles also possess antioxidant properties and contribute to immune reactions and intercellular signaling. Herein, we review data on the structure and mechanisms of the pleiotropic biological functions of HDL from the point of view of their evolutionary role and complex dynamic nature. [ABSTRACT FROM AUTHOR]

Composites of montmorillonite K10 (MMT K10) and ionic liquid (IL) containing a 1-butyl-3-methyl-imidazolium cation ([BMIm]+) and various anions, such as bis (trifluoromethylsulfonyl) imide ([NTf2]−), trifluoromethanesulfonate ([OTf]−), and dicyanamide ([DCA]−) have been obtained in this work. A number of methods, such as dynamic light scattering (DLS), scanning electron microscopy (SEM), X-ray diffraction (XRD), thermal gravimetry (TG), differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, and nitrogen adsorption–desorption have been used to characterize clay, and to study the structure and thermal behaviour of the composites. It has been found that the MMT K10 powder has a narrow particle size distribution with a peak at 246 nm and a mesoporous structure (SBET=195 m2/g). According to the FTIR spectra, MMT K10/IL interaction depends on the IL type. It has been identified that confined ionic liquid interacts with both clay and adsorbed water in accordance with the hydrophilicity and size of the anion, in the following order: [DCA]− > [OTf]− > [NTf2]−. Characteristic temperatures of glass transition, crystallization, and melting have been determined for the ionic liquids under study and their MMT K10 composites. It has been revealed that when IL is adsorbed on the surface of clay, the phase transitions in IL change. The greatest changes are observed in the case of BMImNTf2. By applying the method of thermogravimetric analysis, it is shown that composite formation is accompanied by a decrease in the IL thermal stability. Apparently, the highly developed surface of montmorillonite K10, obtained by acid treatment, plays a major role in the decrease in the IL's thermal stability. The influence of the IL anion on the thermal and spectral characteristics of an MMT K10/IL composite was studied for the first time. [ABSTRACT FROM AUTHOR]

This article is devoted to further development of magnetron sputtering technology for catalysts and catalysts layer production for fuel cells and other electrochemical devices. Platinum-carbon films with Pt content up to 95–97 wt % were deposited using different sputtering regimes—DC (direct current) sputtering with and without application of a pulse negative bias voltage to the titanium substrate and also bipolar pulse sputtering with frequency of 10 kHz and 100 kHz. Composite platinum carbon targets were used for sputtering. Characteristics of platinum-carbon films were compared with those of platinum films deposited using the same regimes. The main methods of investigation were scanning transmission electron microscopy (STEM) with energy dispersive X-ray spectroscopy; potentiostatic and potentiodynamic methods. The catalytic activity of platinum-carbon films increased with platinum content and at a platinum concentration of 95–97 wt % became higher than that of platinum films sputtered in the same regimes. It was proposed that carbon atoms deposited on the substrate limited the mobility of the deposited platinum species and inhibited Pt cluster growth. Platinum-carbon films produced by pulsed DC magnetron sputtering with pulsed frequency 100 kHz consisted of narrow Pt columns with dome nanotops forming a well-developed surface. The porosity and specific surface of these columnar nanopillar films were higher compared with those of pure platinum films deposited under the same conditions. Moreover, the platinum-carbon films deposited using a bipolar pulse regime with a frequency of 100 kHz had the highest specific surface, porosity (30%) and catalytic activity in hydrogen and oxygen evolution due to a high ion current density and reduced pulse duration which inhibited the growth of large platinum globules. [ABSTRACT FROM AUTHOR]

A brief review focuses on studies into the structural reasons for the nonlinear optical properties of crystals of the potassium titanyl phosphate family, performed at the Shubnikov Institute of Crystallography. Accurate X-ray diffraction data are discussed, providing evidence that the optical susceptibility of crystals is related not only to the alternation of long and short Ti–O bonds in the chains of TiO6 octahedra, but to the geometry of tetrahedral anions and the alkaline cation arrangement in the structure channels, as well. The contribution of each of the three structural components depends on the crystal composition. [ABSTRACT FROM AUTHOR]