Search

Py-GC/MS combines pyrolysis with analytical tools of gas chromatography (GC) and mass spectrometry (MS) and is a quick and highly effective method to analyse the volatiles generated from small amounts of feeds. The review focuses on using zeolites and other catalysts in the fast co-pyrolysis of various feedstocks, including biomass wastes (plants and animals) and municipal waste materials, to improve the yield of specific volatile products. The utilisation of zeolite catalysts, including HZSM-5 and nMFI, results in a synergistic reduction of oxygen and an increase in the hydrocarbon content of pyrolysis products. The literature works also indicate HZSM-5 produced the most bio-oil and had the least coke deposition among the zeolites tested. Other catalysts, such as metals and metal oxides, and feedstocks that act as catalysts (self-catalysis), such as red mud and oil shale, are also discussed in the review. Combining catalysts, such as metal oxides and HZSM-5, further improves the yields of aromatics during co-pyrolysis. The review highlights the need for further research on the kinetics of the processes, optimisation of feed-to-catalyst ratios, and stability of catalysts and products. [ABSTRACT FROM AUTHOR]

Background: Bioenergy attracts much attention due to the global demand for renewable and sustainable energy resources. Waste biomass feedstocks—date pits, coffee waste, and cow dung—require efficient and environmentally friendly waste-management technologies such as pyrolysis. Fast pyrolysis occurs at fast heating rates (10–100 °C/s), generates high bio-oil yields, and is the most widely used process for biofuel generation. The aim of the study is to compare the effect of pyrolysis between single, binary, and ternary feeds on thermal degradation behavior and bio-oil composition. Methods: Thermogravimetric analysis (TGA) was conducted at 30 °C/min from room temperature to 850 °C to understand the thermal degradation behavior of the biomasses. A Pyroprobe® reactor—a micro-scale pyrolyzer—was used to conduct the fast pyrolysis at 500 °C with a heating rate of 10 °C/s, and the volatile contents were quantified using a gas chromatograph–mass spectrometer (GC/MS). Results: The (TGA) showed three main stages of decomposition following dehydration, devolatilization, and char degradation for the different single and multiple feeds. According to the identified compounds, the bio-oil components are broadly identified as aldehydes, amines, aliphatic, aromatics, alcohols, furans, ketones, and acids. The three single-biomass pyrolysis products have four compounds in common, acetic acid and ketone groups (acetic acid, 2-propanone, 1-hydroxy-, benzyl methyl ketone, and 1,2-cyclopentanedione). Conclusion: The bio-oil generated from the feeds comprises great potential for volatiles, diesel, and gasoline production with carbon atoms ranging from C2–C33. Future studies should focus on understanding the effect of procedural parameters, including blending ratio, temperature, and heating rates, on bio-oil composition. Additional molecular techniques should be employed to understand biomass components' reaction mechanisms to produce useful bio-oil products. [ABSTRACT FROM AUTHOR]