Search

Radiologists assess the results of mammography, the key screening tool for the detection of breast cancer, to determine the presence of malignancy. They, routinely, compare recent and prior mammographic views to identify changes between the screenings. In case a new lesion appears in a mammogram, or a region is changing rapidly, it is more likely to be suspicious, compared to a lesion that remains unchanged and it is usually benign. However, visual evaluation of mammograms is challenging even for expert radiologists. For this reason, various Computer-Aided Diagnosis (CAD) algorithms are being developed to assist in the diagnosis of abnormal breast findings using mammograms. Most of the current CAD systems do so using only the most recent mammogram. This paper provides a review of the development of methods to emulate the radiological approach and perform automatic segmentation and/or classification of breast abnormalities using sequential mammogram pairs. It begins with demonstrating the importance of utilizing prior views in mammography, through the review of studies where the performance of expert and less-trained radiologists was compared. Following, image registration techniques and their application to mammography are presented. Subsequently, studies that implemented temporal analysis or subtraction of temporally sequential mammograms are summarized. Finally, a description of the open access mammography datasets is provided. This comprehensive review can serve as a thorough introduction to the use of prior information in breast cancer CAD systems but also provides indicative directions to guide future applications. [ABSTRACT FROM AUTHOR]

Developing a prediction model from risk factors can provide an efficient method to recognize breast cancer. Machine learning (ML) algorithms have been applied to increase the efficiency of diagnosis at the early stage. This paper studies a support vector machine (SVM) combined with an extremely randomized trees classifier (extra-trees) to provide a diagnosis of breast cancer at the early stage based on risk factors. The extra-trees classifier was used to remove irrelevant features, while SVM was utilized to diagnose the breast cancer status. A breast cancer dataset consisting of 116 subjects was utilized by machine learning models to predict breast cancer, while the stratified 10-fold cross-validation was employed for the model evaluation. Our proposed combined SVM and extra-trees model reached the highest accuracy up to 80.23%, which was significantly better than the other ML model. The experimental results demonstrated that by applying extra-trees-based feature selection, the average ML prediction accuracy was improved by up to 7.29% as contrasted to ML without the feature selection method. Our proposed model is expected to increase the efficiency of breast cancer diagnosis based on risk factors. In addition, we presented the proposed prediction model that could be employed for web-based breast cancer prediction. The proposed model is expected to improve diagnostic decision-support systems by predicting breast cancer disease accurately. [ABSTRACT FROM AUTHOR]

Simple Summary: This study aimed to develop a deep learning model based on a convolutional neural network (CNN) architecture to predict Invasive Ductal Carcinoma (IDC), a form of breast cancer. The model also includes a user-friendly graphical interface for healthcare professionals to utilize the tool conveniently. The results of the study showed a high accuracy rate, suggesting the potential of this model in improving early breast cancer detection and personalized treatment strategies. Background: Deep learning models have shown potential in improving cancer diagnosis and treatment. This study aimed to develop a convolutional neural network (CNN) model to predict Invasive Ductal Carcinoma (IDC), a common type of breast cancer. Additionally, a user-friendly interface was designed to facilitate the use of the model by healthcare professionals. Methods: The CNN model was trained and tested using a dataset of high-resolution microscopic images derived from 162 whole-mount slide images of breast cancer specimens. These images were meticulously scanned at 40× magnification using a state-of-the-art digital slide scanner to capture detailed information. Each image was then divided into 277,524 patches of 50 × 50 pixels, resulting in a diverse dataset containing 198,738 IDC-negative and 78,786 IDC-positive patches. Results: The model achieved an accuracy of 98.24% in distinguishing between benign and malignant cases, demonstrating its effectiveness in cancer detection. Conclusions: This study suggests that the developed CNN model has promising potential for clinical applications in breast cancer diagnosis and personalized treatment strategies. Our study further emphasizes the importance of accurate and reliable cancer detection methods for timely diagnosis and treatment. This study establishes a foundation for utilizing deep learning models in future cancer treatment research by demonstrating their effectiveness in analyzing large and complex datasets. This approach opens exciting avenues for further research and potentially improves our understanding of cancer and its treatment. [ABSTRACT FROM AUTHOR]

Many patients affected by breast cancer die every year because of improper diagnosis and treatment. In recent years, applications of deep learning algorithms in the field of breast cancer detection have proved to be quite efficient. However, the application of such techniques has a lot of scope for improvement. Major works have been done in this field, however it can be made more efficient by the use of transfer learning to get impressive results. In the proposed approach, Convolutional Neural Network (CNN) is complemented with Transfer Learning for increasing the efficiency and accuracy of early detection of breast cancer for better diagnosis. The thought process involved using a pre-trained model, which already had some weights assigned rather than building the complete model from scratch. This paper mainly focuses on ResNet101 based Transfer Learning Model paired with the ImageNet dataset. The proposed framework provided us with an accuracy of 99.58%. Extensive experiments and tuning of hyperparameters have been performed to acquire the best possible results in terms of classification. The proposed frameworks aims to be an efficient tool for all doctors and society as a whole and help the user in early detection of breast cancer. [ABSTRACT FROM AUTHOR]

Breast cancer results from a disruption of certain cells in breast tissue that undergo uncontrolled growth and cell division. These cells most often accumulate and form a lump called a tumor, which may be benign (non-cancerous) or malignant (cancerous). Malignant tumors can spread quickly throughout the body, forming tumors in other areas, which is called metastasis. Standard screening techniques are insufficient in the case of metastasis; therefore, new and advanced techniques based on artificial intelligence (AI), machine learning, and regression models have been introduced, the primary aim of which is to automatically diagnose breast cancer through the use of advanced techniques, classifiers, and real images. Real fine-needle aspiration (FNA) images were collected from Wisconsin, and four classifiers were used, including three machine learning models and one regression model: the support vector machine (SVM), naive Bayes (NB), k-nearest neighbors (k-NN), and decision tree (DT)-C4.5. According to the accuracy, sensitivity, and specificity results, the SVM algorithm had the best performance; it was the most powerful computational classifier with a 97.13% accuracy and 97.5% specificity. It also had around a 96% sensitivity for the diagnosis of breast cancer, unlike the models used for comparison, thereby providing an exact diagnosis on the one hand and a clear classification between benign and malignant tumors on the other hand. As a future research prospect, more algorithms and combinations of features can be considered for the precise, rapid, and effective classification and diagnosis of breast cancer images for imperative decisions. [ABSTRACT FROM AUTHOR]

Breast cancer is the second most common cancer in women who are mainly middle-aged and older. The American Cancer Society reported that the average risk of developing breast cancer sometime in their life is about 13%, and this incident rate has increased by 0.5% per year in recent years. A biopsy is done when screening tests and imaging results show suspicious breast changes. Advancements in computer-aided system capabilities and performance have fueled research using histopathology images in cancer diagnosis. Advances in machine learning and deep neural networks have tremendously increased the number of studies developing computerized detection and classification models. The dataset-dependent nature and trial-and-error approach of the deep networks' performance produced varying results in the literature. This work comprehensively reviews the studies published between 2010 and 2022 regarding commonly used public-domain datasets and methodologies used in preprocessing, segmentation, feature engineering, machine-learning approaches, classifiers, and performance metrics. [ABSTRACT FROM AUTHOR]

In the developing world, cancer death is one of the major problems for humankind. Even though there are many ways to prevent it before happening, some cancer types still do not have any treatment. One of the most common cancer types is breast cancer, and early diagnosis is the most important thing in its treatment. Accurate diagnosis is one of the most important processes in breast cancer treatment. In the literature, there are many studies about predicting the type of breast tumors. In this research paper, data about breast cancer tumors from Dr. William H. Walberg of the University of Wisconsin Hospital were used for making predictions on breast tumor types. Data visualization and machine learning techniques including logistic regression, k-nearest neighbors, support vector machine, naïve Bayes, decision tree, random forest, and rotation forest were applied to this dataset. R, Minitab, and Python were chosen to be applied to these machine learning techniques and visualization. The paper aimed to make a comparative analysis using data visualization and machine learning applications for breast cancer detection and diagnosis. Diagnostic performances of applications were comparable for detecting breast cancers. Data visualization and machine learning techniques can provide significant benefits and impact cancer detection in the decision-making process. In this paper, different machine learning and data mining techniques for the detection of breast cancer were proposed. Results obtained with the logistic regression model with all features included showed the highest classification accuracy (98.1%), and the proposed approach revealed the enhancement in accuracy performances. These results indicated the potential to open new opportunities in the detection of breast cancer. [ABSTRACT FROM AUTHOR]

Breast cancer is the leading type of cancer in women, causing nearly 600,000 deaths every year, globally. Although the tumors can be localized within the breast, they can spread to other body parts, causing more harm. Therefore, early diagnosis can help reduce the risks of this cancer. However, a breast cancer diagnosis is complicated, requiring biopsy by various methods, such as MRI, ultrasound, BI-RADS, or even needle aspiration and cytology with the suggestions of specialists. On certain occasions, such as body examinations of a large number of people, it is also a large workload to check the images. Therefore, in this work, we present an efficient and automatic diagnosis system based on the hierarchical extreme learning machine (H-ELM) for breast cancer ultrasound results with high efficiency and make a primary diagnosis of the images. To make it compatible to use, this system consists of PNG images and general medical software within the H-ELM framework, which is easily trained and applied. Furthermore, this system only requires ultrasound images on a small scale, of 28 × 28 pixels, reducing the resources and fulfilling the application with low-resolution images. The experimental results show that the system can achieve 86.13% in the classification of breast cancer based on ultrasound images from the public breast ultrasound images (BUSI) dataset, without other relative information and supervision, which is higher than the conventional deep learning methods on the same dataset. Moreover, the training time is highly reduced, to only 5.31 s, and consumes few resources. The experimental results indicate that this system could be helpful for precise and efficient early diagnosis of breast cancers with primary examination results. [ABSTRACT FROM AUTHOR]

Imaging is important in cancer diagnostics. It takes a long period of medical training and clinical experience for radiologists to be able to accurately interpret diagnostic images. With the advance of big data analysis, machine learning and AI-based devices are currently under development and taking a role in imaging diagnostics. If an AI-based imaging device can read the image as accurately as experienced radiologists, it may be able to help radiologists increase the accuracy of their reading and manage their workloads. In this paper, we consider two potential study objectives of a clinical trial to evaluate an AI-based device for breast cancer diagnosis by comparing its concordance with human radiologists. We propose statistical design and analysis methods for each study objective. Extensive numerical studies are conducted to show that the proposed statistical testing methods control the type I error rate accurately and the design methods provide required sample sizes with statistical powers close to pre-specified nominal levels. The proposed methods were successfully used to design and analyze a real device trial. [ABSTRACT FROM AUTHOR]

One of the most prevalent cancers in women is breast cancer. The mortality rate related to this disease can be decreased by early, accurate diagnosis to increase the chance of survival. Infrared thermal imaging is one of the breast imaging modalities in which the temperature of the breast tissue is measured using a screening tool. The previous studies did not use pre-trained deep learning (DL) with deep attention mechanisms (AMs) on thermographic images for breast cancer diagnosis. Using thermal images from the Database for Research Mastology with Infrared Image (DMR-IR), the study investigates the use of a pre-trained Visual Geometry Group with 16 layers (VGG16) with AMs that can produce good diagnosis performance utilizing the thermal images of breast cancer. The symmetry of the three models resulting from the combination of VGG16 with three types of AMs is evident in all its stages in methodology. The models were compared to state-of-art breast cancer diagnosis approaches and tested for accuracy, sensitivity, specificity, precision, F1-score, AUC score, and Cohen's kappa. The test accuracy rates for the AMs using the VGG16 model on the breast thermal dataset were encouraging, at 99.80%, 99.49%, and 99.32%. Test accuracy for VGG16 without AMs was 99.18%, whereas test accuracy for VGG16 with AMs improved by 0.62%. The proposed approaches also performed better than previous approaches examined in the related studies. [ABSTRACT FROM AUTHOR]

Although most cases are identified at a late stage, breast cancer is the most public malignancy amongst women globally. However, mammography for the analysis of breast cancer is not routinely available at all general hospitals. Prolonging the period between detection and treatment for breast cancer may raise the likelihood of proliferating the disease. To speed up the process of diagnosing breast cancer and lower the mortality rate, a computerized method based on machine learning was created. The purpose of this investigation was to enhance the investigative accuracy of machine-learning algorithms for breast cancer diagnosis. The use of machine-learning methods will allow for the classification and prediction of cancer as either benign or malignant. This investigation applies the machine learning algorithms of random forest (RF) and the support vector machine (SVM) with the feature extraction method of linear discriminant analysis (LDA) to the Wisconsin Breast Cancer Dataset. The SVM with LDA and RF with LDA yielded accuracy results of 96.4% and 95.6% respectively. This research has useful applications in the medical field, while it enhances the efficiency and precision of a diagnostic system. Evidence from this study shows that better prediction is crucial and can benefit from machine learning methods. The results of this study have validated the use of feature extraction for breast cancer prediction when compared to the existing literature. [ABSTRACT FROM AUTHOR]

Early detection of cancer increases the probability of recovery. This paper presents an intelligent decision support system (IDSS) for the early diagnosis of cancer based on gene expression profiles collected using DNA microarrays. Such datasets pose a challenge because of the small number of samples (no more than a few hundred) relative to the large number of genes (in the order of thousands). Therefore, a method of reducing the number of features (genes) that are not relevant to the disease of interest is necessary to avoid overfitting. The proposed methodology uses the information gain (IG) to select the most important features from the input patterns. Then, the selected features (genes) are reduced by applying the grey wolf optimization (GWO) algorithm. Finally, the methodology employs a support vector machine (SVM) classifier for cancer type classification. The proposed methodology was applied to two datasets (Breast and Colon) and was evaluated based on its classification accuracy, which is the most important performance measure in disease diagnosis. The experimental results indicate that the proposed methodology is able to enhance the stability of the classification accuracy as well as the feature selection. [ABSTRACT FROM AUTHOR]

Breast cancer is a prevalent disease that affects mostly women, and early diagnosis will expedite the treatment of this ailment. Recently, machine learning (ML) techniques have been employed in biomedical and informatics to help fight breast cancer. Extracting information from data to support the clinical diagnosis of breast cancer is a tedious and time-consuming task. The use of machine learning and feature extraction techniques has significantly changed the whole process of a breast cancer diagnosis. This research work proposed a machine learning model for the classification of breast cancer. To achieve this, a support vector machine (SVM) was employed for the classification, and linear discriminant analysis (LDA) was employed for feature extraction. We measured our model's feature extraction performance in principal component analysis (PCA) and random forest for classification. A comparative analysis of the proposed model was performed to show the effectiveness of the feature extraction, and we computed missing values based on the classifier's accuracy, precision, and recall. The original Wisconsin Breast Cancer dataset (WBCD) and Wisconsin Prognostic Breast Cancer dataset (WPBC) were used. We evaluated performance in two phases: In phase 1, rows containing missing values were computed using the mean, and in phase 2, rows containing missing values were computed using the median. LDA–SVM when median was used to compute missing values has better results, with accuracy of 99.2%, recall of 98.0% and precision of 98.0% on the WBCD dataset and an accuracy of 79.5%, recall of 76.0% and precision of 59.0% on the WPBC dataset. The SVM classifier had a better performance in handling classification problems when LDA was applied and the median was used as a method for computing missing values. [ABSTRACT FROM AUTHOR]

Globally, breast cancer is one of the most significant causes of death among women. Early detection accompanied by prompt treatment can reduce the risk of death due to breast cancer. Currently, machine learning in cloud computing plays a pivotal role in disease diagnosis, but predominantly among the people living in remote areas where medical facilities are scarce. Diagnosis systems based on machine learning act as secondary readers and assist radiologists in the proper diagnosis of diseases, whereas cloud-based systems can support telehealth services and remote diagnostics. Techniques based on artificial neural networks (ANN) have attracted many researchers to explore their capability for disease diagnosis. Extreme learning machine (ELM) is one of the variants of ANN that has a huge potential for solving various classification problems. The framework proposed in this paper amalgamates three research domains: Firstly, ELM is applied for the diagnosis of breast cancer. Secondly, to eliminate insignificant features, the gain ratio feature selection method is employed. Lastly, a cloud computing-based system for remote diagnosis of breast cancer using ELM is proposed. The performance of the cloud-based ELM is compared with some state-of-the-art technologies for disease diagnosis. The results achieved on the Wisconsin Diagnostic Breast Cancer (WBCD) dataset indicate that the cloud-based ELM technique outperforms other results. The best performance results of ELM were found for both the standalone and cloud environments, which were compared. The important findings of the experimental results indicate that the accuracy achieved is 0.9868, the recall is 0.9130, the precision is 0.9054, and the F1-score is 0.8129. [ABSTRACT FROM AUTHOR]

With advances in next-generation sequencing(NGS) technologies, a large number of multiple types of high-throughput genomics data are available. A great challenge in exploring cancer progression is to identify the driver genes from the variant genes by analyzing and integrating multi-types genomics data. Breast cancer is known as a heterogeneous disease. The identification of subtype-specific driver genes is critical to guide the diagnosis, assessment of prognosis and treatment of breast cancer. We developed an integrated frame based on gene expression profiles and copy number variation (CNV) data to identify breast cancer subtype-specific driver genes. In this frame, we employed statistical machine-learning method to select gene subsets and utilized an module-network analysis method to identify potential candidate driver genes. The final subtype-specific driver genes were acquired by paired-wise comparison in subtypes. To validate specificity of the driver genes, the gene expression data of these genes were applied to classify the patient samples with 10-fold cross validation and the enrichment analysis were also conducted on the identified driver genes. The experimental results show that the proposed integrative method can identify the potential driver genes and the classifier with these genes acquired better performance than with genes identified by other methods. [ABSTRACT FROM AUTHOR]

A tumor is an abnormal tissue classified as either benign or malignant. A breast tumor is one of the most common tumors in women. Radiologists use mammograms to identify a breast tumor and classify it, which is a time-consuming process and prone to error due to the complexity of the tumor. In this study, we applied machine learning-based techniques to assist the radiologist in reading mammogram images and classifying the tumor in a very reasonable time interval. We extracted several features from the region of interest in the mammogram, which the radiologist manually annotated. These features are incorporated into a classification engine to train and build the proposed structure classification models. We used a dataset that was not previously seen in the model to evaluate the accuracy of the proposed system following the standard model evaluation schemes. Accordingly, this study found that various factors could affect the performance, which we avoided after experimenting all the possible ways. This study finally recommends using the optimized Support Vector Machine or Naïve Bayes, which produced 100% accuracy after integrating the feature selection and hyper-parameter optimization schemes. [ABSTRACT FROM AUTHOR]

Breast cancer is one of the main causes of death among women worldwide. Early detection of this disease helps reduce the number of premature deaths. This research aims to design a method for identifying and diagnosing breast tumors based on ultrasound images. For this purpose, six techniques have been performed to detect and segment ultrasound images. Features of images are extracted using the fractal method. Moreover, k-nearest neighbor, support vector machine, decision tree, and Naïve Bayes classification techniques are used to classify images. Then, the convolutional neural network (CNN) architecture is designed to classify breast cancer based on ultrasound images directly. The presented model obtains the accuracy of the training set to 99.8%. Regarding the test results, this diagnosis validation is associated with 88.5% sensitivity. Based on the findings of this study, it can be concluded that the proposed high-potential CNN algorithm can be used to diagnose breast cancer from ultrasound images. The second presented CNN model can identify the original location of the tumor. The results show 92% of the images in the high-performance region with an AUC above 0.6. The proposed model can identify the tumor's location and volume by morphological operations as a post-processing algorithm. These findings can also be used to monitor patients and prevent the growth of the infected area. [ABSTRACT FROM AUTHOR]

Color Doppler is used in the clinic for visually assessing the vascularity of breast masses on ultrasound, to aid in determining the likelihood of malignancy. In this study, quantitative color Doppler radiomics features were algorithmically extracted from breast sonograms for machine learning, producing a diagnostic model for breast cancer with higher performance than models based on grayscale and clinical category from the Breast Imaging Reporting and Data System for ultrasound (BI-RADSUS). Ultrasound images of 159 solid masses were analyzed. Algorithms extracted nine grayscale features and two color Doppler features. These features, along with patient age and BI-RADSUS category, were used to train an AdaBoost ensemble classifier. Though training on computer-extracted grayscale features and color Doppler features each significantly increased performance over that of models trained on clinical features, as measured by the area under the receiver operating characteristic (ROC) curve, training on both color Doppler and grayscale further increased the ROC area, from 0.925 ± 0.022 to 0.958 ± 0.013. Pruning low-confidence cases at 20% improved this to 0.986 ± 0.007 with 100% sensitivity, whereas 64% of the cases had to be pruned to reach this performance without color Doppler. Fewer borderline diagnoses and higher ROC performance were both achieved for diagnostic models of breast cancer on ultrasound by machine learning on color Doppler features. [ABSTRACT FROM AUTHOR]