Search

We propose a piezoelectric–piezoresistive coupling electric field sensor capable of performing large dynamic range AC electric field measurements. The electric field sensor utilizes direct coupling between piezoelectric (PE) materials and piezoresistive (PR) strain gauges, in conjunction with an external signal conditioning circuit, to measure AC electric fields effectively. We verified the feasibility of the scheme using a finite element simulation, fabricated a prototype of the electric field sensor, and characterized the properties of the prototype. The testing results indicate that the sensor exhibits an ac resolution of 50 V/m and a linear measurable electric field range of 0 to over 200 kV/m, which keeps the linearity at less than 0.94% from 1 Hz to over 5 kHz. Furthermore, the sensor also has advantages, such as a small size and low power consumption. The sensor can enhance the comprehensive observability and measurability of digital power grids. [ABSTRACT FROM AUTHOR]

One of the major concerns in the development of three-dimensional (3D) electric field sensors (EFSs) is their susceptibility to cross-axis coupling interference. The output signal for each sensing axis of a 3D EFS is often coupled by electric field components from the two other orthogonal sensing axes. In this paper, a one-dimensional (1D) electric field sensor chip (EFSC) with low cross-axis coupling interference is presented. It is designed to be symmetrical, forming a pair of in-plane symmetrically-located sensing structures. Using a difference circuit, the 1D EFSC is capable of sensing parallel electric fields along symmetrical structures and eliminating cross-axis coupling interference, which is contrast to previously reported 1D EFSCs designed for perpendicular electric field component measurement. Thus, a 3D EFS with low cross-axis coupling interference can be realized using three proposed 1D EFSCs. This 3D EFS has the advantages of low cross-axis coupling interference, small size, and high integration. The testing and calibration systems of the proposed 3D EFS were developed. Experimental results show that in the range of 0–120 kV/m, cross-axis sensitivities are within 5.48%, and the total measurement errors of this 3D EFS are within 6.16%. [ABSTRACT FROM AUTHOR]

The steady-state zero output of static electric field measuring systems often fluctuates, which is caused mainly by the finite leakage resistance of the water film on the surface of the electric field microsensor package. The water adsorption has been calculated using the Boltzmann distribution equation at various relative humidities for borosilicate glass and polytetrafluoroethylene surfaces. At various humidities, water film thickness has been calculated, and the induced charge leakage and field attenuation have been theoretically investigated. Experiments have been performed with microsensors to verify the theoretical predictions and the results are in good agreement. [ABSTRACT FROM AUTHOR]

Thus far, despite the development of electric field sensors (EFSs) such as field mills, optoelectronic EFSs and microelectromechanical system (MEMS)-based EFSs, no sensor can accurately measure an electric field in space due to the existence of space charge and the influence of charge attachment. To measure a spatial synthetic electric field in an ion flow field, a double potential independent differential EFS based on MEMS is proposed. Compared with other EFSs, this method has the advantages of independent potential (without grounding) and the ability to support the measurement of the synthetic ion flow electric field in space. First, to analyse the charge distribution after the sensor is involved exposed to an electric field, a simulation model was constructed. Then, given the redistribution of the spatial electric field in space and the influence of the surface charge on the sensor, the quantitative relationship between the electric field to be measured and that measured by the proposed sensor was obtained. To improve the performance of the EFS, a set of synthetic field strength sensor calibration systems that consider spatial ion flow injection was established. Furthermore, the parameter λ, which is related to the relative position of the differential chips, was determined. Finally, a series of comparative experiments indicated that the differential EFS highlighted in the present study exhibits good linearity and accuracy. [ABSTRACT FROM AUTHOR]