Search

Energy management systems allow the Smart Grids industry to track, improve, and regulate energy use. Particularly, demand-side management is regarded as a crucial component of the entire Smart Grids system. Therefore, by aligning utility offers with customer demand, anticipating future energy demands is essential for regulating consumption. An updated examination of several forecasting techniques for projecting energy short-term load forecasts is provided in this article. Each class of algorithms, including statistical techniques, Machine Learning, Deep Learning, and hybrid combinations, are comparatively evaluated and critically analyzed, based on three real consumption datasets from Spain, Germany, and the United States of America. To increase the size of tiny training datasets, this paper also proposes a data augmentation technique based on Generative Adversarial Networks. The results show that the Deep Learning-hybrid model is more accurate than traditional statistical methods and basic Machine Learning procedures. In the same direction, it is demonstrated that more comprehensive datasets assisted by complementary data, such as energy generation and weather, may significantly boost the accuracy of the models. Additionally, it is also demonstrated that Generative Adversarial Networks-based data augmentation may greatly improve algorithm accuracy. [ABSTRACT FROM AUTHOR]

One of the main identified causes of energy poverty (EP) is the low energy efficiency of housing. In this line, since 2018, public administrations and NGOs collaborating with the Naturgy Foundation's Energy Renovation Solidarity Fund have implemented several shallow renovation interventions in 3660 Spanish vulnerable households. However, the effects of these measures on domestic energy affordability were not evaluated before because of a lack of a proper method. This paper presents a methodology to objectively assess the impact of these interventions on EP. In particular, this work proposes calculating a hidden EP indicator using data from a primary survey and applies it to a local case study (54 vulnerable households in Catalonia—10% of dwellings renovated by the Fund in the region) by processing their characteristics and energy bills before and after the implementation of the interventions. Considering the whole sample of households analysed, the hidden EP indicator drops by 10% in absolute terms (11.2% in relative terms) after the retrofit, and the average EP gap goes from 423 €/year to 313 €/year, thus marking a significant positive effect of the analysed interventions on the EP situation of this population. Eventually, extrapolating the results to the vulnerable population in Spain, this paper points out a series of recommendations that could be useful for decision-makers and organisations when designing and implementing shallow renovation interventions. [ABSTRACT FROM AUTHOR]

Combined Heat and Power (CHP) has been identified by the EU as a powerful resource capable of making substantial contributions to energy savings and reducing GHG emissions. Spain's effort to promote CHP has been prolific since the 1980s. In this regard, there have been various Laws, Royal Decrees (RDs) and European Union (EU) Directives addressed to reach the national objectives set for the CHP sector. Despite these attempts, the evolution and growth of installed CHP capacity has been irregular, compared to other technologies. Likewise, the academic treatment of the Spanish CHP evolution has not deserved the same attention as other technologies such as wind, photovoltaic and thermal solar systems. As a result, this article is aimed at providing a comprehensive overview of the regulatory frameworks applied to the Spanish CHP sector and analysing the reasons behind the variable evolution of the installed CHP capacity. The study covers the legislative context from 1980 to 2020, describing the evolution during both the pre-liberalization and liberalization periods, highlighting the modifications in economic policies that affected self-producers and the so-called Special Regime (SR) for CHP, and examining the challenges faced during the cost containment measures that followed. The manuscript finds and explains the connection between the regulatory framework and the evolution of installed CHP capacity in Spain. Likewise, the connection between the industrial situation and the promotion of CHP, as well as the influence of the Spanish Electricity Sector (SES)'s liberalization on the CHP sector are also pointed out. The paper intends to provide valuable insights for CHP experts and policymakers by showcasing the importance of aligning regulatory measures with the objectives of energy efficiency. It also serves as a reference for countries in various stages of promoting CHP, and provides evidence for the importance of stable energy-policy control mechanisms. [ABSTRACT FROM AUTHOR]

The ongoing spread of electric sustainable mobility is transforming the local ways of transport in metropolitan areas. This is meant to be extended outside of big cities in the near future thanks to new technological developments. Little towns should adapt to these changes, as they are located geographically far from the big cities and are generally characterized by low economic and demographic indicators. Hence, little towns must keep pace with these changes in mobility to avoid being isolated from the main cities in a country. People living in the countryside usually move toward big cities for various reasons, either related to work or living necessities. Therefore, it must be possible to conduct usual displacements through the use of electric vehicles (EVs), i.e., reaching the destinations and supplying the batteries through charging infrastructures. This paper studies the full implementation of electric mobility applied in the case of Cuenca, a city located in middle Spain. A brief geographical context is provided, together with the routes and destinations of interest considered. Then, different EVs are considered and an analytical vehicle model is provided. The model was exploited to simulate the electrical energy demand to reach the destinations chosen; the results allow comparing the performances offered by different types of EVs. This aspect is then considered as the basis to propose further upgrades in the charging infrastructures where needed, to comply with the widespread use of electric mobility. [ABSTRACT FROM AUTHOR]

In this paper, the energy benefits of switchable insulation systems (SIS) are assessed when applied as shades for windows as well as dynamic insulation for exterior walls of residential buildings located in European countries including Belgium and Spain. A series of analyses is performed for detached houses and apartments representing common Belgian residential buildings to determine the energy performance of SIS when deployed to windows and exterior walls and operated using simplified rule-based controls. The analysis results indicate that SIS-integrated windows can achieve significant energy savings for both dwelling types in Belgium, including the elimination of any mechanical cooling and a reduction of up to 44% of heating energy end-use. Moreover, the results show that SIS can offer even more energy efficiency and thermal comfort benefits when deployed to both windows and exterior walls for residential buildings. These energy efficiency benefits are higher, especially for reducing heating needs, for the milder climates of Belgium and Spain. However, it should be noted that the energy performance of SIS could be affected substantially by windows' orientation and occupants' behavior. [ABSTRACT FROM AUTHOR]

In recent years, there has been growing concern regarding energy efficiency in the building sector with energy requirements increasing worldwide and now responsible for about 40% of final energy consumption in Europe. Previous research has shown that ventilated façades help to reduce energy use when cooling buildings in hot and temperate climates. Of the different ventilated façade configurations reported in the literature, the configuration of ventilated façade with window rarely has been studied, and its 3D thermodynamic behavior is deserving of further analysis and modeling. This paper examines the thermal behavior of an opaque ventilated façade with a window, in experimentally and numerical terms and its impact in energy savings to get indoor comfort. Field measurements were conducted during the winter, spring and summer seasons of 2021 using outdoor full scale test cells located in Seville (southern Spain). The modeling of the ventilated façade was carried out using a three-dimensional approach taking into account the 3D behavior of the air flow in the air cavity due to the presence of the window. The validation and comparison process using experimental data showed that the proposed model provided good results from quantitative and qualitative point of view. The reduction of the heat flux was assessed by comparing the energy performance of a ventilated façade with that of an unventilated façade. Both experimental and numerical results showed that the ventilated façade provided a reduction in annual total energy consumption when compared to the unventilated façade, being compensated the winter energy penalization by the summer energy savings. This reduction is about 21 % for the whole typical climatic year showing the ability of the opaque ventilated façade studied to reduce energy consumption to insure indoor comfort, making its suitable for use in retrofitting the energy-obsolete building stock built in Spain in the middle decades of the 20 century. [ABSTRACT FROM AUTHOR]

This study provides an in-depth assessment of the environmental performance of five public schools in the transition towards a low-carbon economy and a more sustainable model of society. Life cycle assessment (LCA) methodology is used to conduct the study. The school system includes several activities and processes clustered in three subsystems: management of the school building, training and learning activities (T&L) and mobility and transport (M&T). A detailed primary data inventory of energy and resources consumption was collected in five schools located in Spain and Portugal. Findings on climate change (CC), water depletion (WD), particular matter (PM), acidification (Ac), and human health (HH), as well as associated external cost (EC), are reported per student in one school year as reference unit, allowing the schools' individual performance comparison and identify the potential improvements. Considering the sample of schools, findings reveal that peculiarities of the schools, such as location, specialization, and level of education, are crucial for the environmental performance. Buildings are a relevant contributor to CC as well as heating and electricity needs, although their relevance is dependent on multiple factors. The M&T subsystem also has relevant weight on the metrics evaluated. Educational activities have a lower impact in absolute terms but, in some schools, it becomes the main contributor to HH due to paper and electricity consumption and manufacturing of equipment. External costs results are in the range of 11 to 38 EUR/student·year mainly caused by heating, electricity and wastes from the building subsystem, and the M&T subsystem. [ABSTRACT FROM AUTHOR]

Understanding of energy consumption patterns is extremely important for optimization of resources and application of green trends. Traditionally, analyses were performed for large environments like regions and nations. However, with the advent of Smart Grids, the study of the behavior of smaller environments has become a necessity to allow a deeper micromanagement of the energy grid. This paper presents a data processing system to analyze energy consumption patterns in industrial parks, based on the cascade application of a Self-Organizing Map (SOM) and the clustering k-means algorithm. The system is validated with real load data from an industrial park in Spain. The validation results show that the system adequately finds different behavior patterns which are meaningful, and is capable of doing so without supervision, and without any prior knowledge about the data. [ABSTRACT FROM AUTHOR]

More than 50% of the world's population lives in cities. Its buildings consume more than a third of the energy and generate 40% of the emissions. This makes cities in general and their buildings in particular priority points of attention for policymakers and utilities. This paper uses population density as a variable to know its influence on energy consumption and emissions produced in buildings. Furthermore, to show its effect more clearly, the influence of the climate was eliminated. The usual energy consumption in buildings is thermal and electrical. The study was carried out at the city level, both per inhabitant and per household. The area actually occupied by the city was considered. The proposed method was applied to the case of Spanish cities with more than 50,000 inhabitants. The results show that the higher the population density, the higher the energy consumption per inhabitant and household in buildings. The consumption of thermal energy is elastic, while that of electrical energy is inelastic, varying more than 100% between extreme groups. Regarding CO2 emissions, the higher the population density, the higher the emissions. Emissions of electrical origin barely vary by 2% and are greater than those of thermal origin. In addition, the proportion of emissions of electrical origin, with respect to the total, decreases with increasing population density from 74% to 55%. This research aims to help policymakers and utilities to take the appropriate measures that favor the use of renewable energies and reduce CO2 emissions. [ABSTRACT FROM AUTHOR]

Thermostatic load control systems are widespread in many countries. Since they provide heat for domestic hot water and space heating on a massive scale in the residential sector, the assessment of their energy performance and the effect of different control strategies requires simplified modeling techniques demanding a small number of inputs and low computational resources. Data-driven techniques are envisaged as one of the best options to meet these constraints. This paper presents a novel methodology consisting of the combination of an optimization algorithm, two auto-regressive models and a control loop algorithm able to virtually replicate the control of thermostatically driven systems. This combined strategy includes all the thermostatically controlled modes governed by the set point temperature and enables automatic assessment of the energy consumption impact of multiple scenarios. The required inputs are limited to available historical readings from smart thermostats and external climate data sources. The methodology has been trained and validated with data sets coming from a selection of 11 smart thermostats, connected to gas boilers, placed in several households located in north-eastern Spain. Important conclusions of the research are that these techniques can estimate the temperature decay of households when the space heating is off as well as the energy consumption needed to reach the comfort conditions. The results of the research also show that estimated median energy savings of 18.1% and 36.5% can be achieved if the usual set point temperature schedule is lowered by 1 °C and 2 °C, respectively. [ABSTRACT FROM AUTHOR]

Improving the energy performance of existing buildings is one of the main strategies defined by the European Union to reduce global energy costs. Amongst the actions to be carried out in buildings to achieve this objective is working with passive measures adapted to each type of climate. To assist designers in the process of finding appropriate solutions for each building and location, different tools have been developed and since the implementation of building information modeling (BIM), it has been possible to perform an analysis of a building's life cycle from an energy perspective and other types of analysis such as a comfort analysis. In the case of Spain, the first BIM environment tool has been implemented that deals with the global analysis of a building's behavior and serves as an alternative to previous methods characterized by their lack of both flexibility and information offered to designers. This paper evaluates and compares the official Spanish energy performance evaluation tool (Cypetherm) released in 2018 using a case study involving the installation of sunlight control devices as part of a building refurbishment. It is intended to determine how databases and simplifications affect the designer's decision-making. Additionally, the yielded energy results are complemented by a comfort analysis to explore the impact of these improvements from a users' wellbeing viewpoint. At the end of the process the yielded results still confirm that the simulation remains far from reality and that simulation tools can indeed influence the decision-making process. [ABSTRACT FROM AUTHOR]

The trend in energy consumption, with a particular focus on heating and cooling demand, is an issue that is relevant to the promotion of new energy policies and more efficient energy systems. Moreover, heating and cooling energy demand is expected to rise in the next several decades, mainly due to climate change as well as increasing incomes in developing countries. In this context, the building sector is currently a relevant energy-intensive economic sector in Morocco; it accounts for 33% of the country's total energy demand (as the sector with the second highest energy demand, after the transport sector), with the residential sector accounting for 25% and the tertiary sector accounting for 8%. Aiming to reduce energy dependence and promote sustainable development, the Moroccan government recently issued a comprehensive plan to increase the share of renewables and improve energy efficiency. This strategy includes novel thermal building regulations promoted by the Moroccan Agency for Energy Efficiency. This paper analyzes the thermal behavior and heating-cooling energy demand of a residential building located in Tangier (Morocco) as a case example, based on the country's new thermal regulations and considering specific climatological conditions. A comparison with common Moroccan residential buildings as well as with those in nearby countries with similar meteorological conditions but significant differences in terms of energy demand regulation and requirements, such as Spain, is also included. Simulations were carried out using the DesingBuilder and EnergyPlus Software packages. According to the results, the last building thermal regulation requirements in Morocco need to be revised and extended in order to achieve the energy efficiency objectives established by the Moroccan government for 2030. [ABSTRACT FROM AUTHOR]

The trend in energy consumption, with a particular focus on heating and cooling demand, is an issue that is relevant to the promotion of new energy policies and more efficient energy systems. Moreover, heating and cooling energy demand is expected to rise in the next several decades, mainly due to climate change as well as increasing incomes in developing countries. In this context, the building sector is currently a relevant energy-intensive economic sector in Morocco; it accounts for 33% of the country's total energy demand (as the sector with the second highest energy demand, after the transport sector), with the residential sector accounting for 25% and the tertiary sector accounting for 8%. Aiming to reduce energy dependence and promote sustainable development, the Moroccan government recently issued a comprehensive plan to increase the share of renewables and improve energy efficiency. This strategy includes novel thermal building regulations promoted by the Moroccan Agency for Energy Efficiency. This paper analyzes the thermal behavior and heating-cooling energy demand of a residential building located in Tangier (Morocco) as a case example, based on the country's new thermal regulations and considering specific climatological conditions. A comparison with common Moroccan residential buildings as well as with those in nearby countries with similar meteorological conditions but significant differences in terms of energy demand regulation and requirements, such as Spain, is also included. Simulations were carried out using the DesingBuilder and EnergyPlus Software packages. According to the results, the last building thermal regulation requirements in Morocco need to be revised and extended in order to achieve the energy efficiency objectives established by the Moroccan government for 2030. [ABSTRACT FROM AUTHOR]

The use of lightweight concrete for the construction of single-family houses has become increasingly popular in Spain. In this paper, single-family houses with different shape factors and window-to-wall ratios are analysed from both a thermal and environmental perspective using Passive House Planning Package (PHPP) software to calculate the energy demand. The study has been carried out for different Atlantic microclimates (coastal, inland, and mountain) in northern Spain. What most affects the thermal energy used for air conditioning is the variation of the microclimates, so the study focuses mainly on this aspect. Operational energy for heating has decreased greatly via the use of high degree of insulation and hence the next task is to decrease the total energy consumed taking into account the embodied energy. Impacts on Primary Energy and Global Warming Potential are calculated using a cradle-to-grave approach. The energy use for heating and domestic hot water is analysed for different thicknesses of insulation under three energy supply scenarios: electricity only (for 2018 and with the Spanish decarbonisation plan for 2030); heat pump plus electricity; and natural gas boiler. Even for houses with a good level of insulation, the ratio of operational-to-total impacts varies significantly: from 46% to 87% for primary energy and from 31% to 75% for global warming potential, depending on the shape factor of the house, the microclimate and the heat supply scenario. By applying future environmental policies, electricity can become a more environmentally friendly option than natural gas. [ABSTRACT FROM AUTHOR]

Solving the issue of energy security for geographical islands presents a one-of-a-kind problem that has to be tackled from multiple sides and requires an interdisciplinary approach that transcends just technical and social aspects. With many islands suffering in terms of limited and costly energy supply due to their remote location, providing a self-sustainable energy system is of utmost importance for these communities. In order to improve upon the status quo, novel solutions and projects aimed at increasing sustainability not only have to consider optimal utilization of renewable energy potentials in accordance with local conditions, but also must include active community participation. This paper analyzes both of these aspects for island communities and brings them together in an optimization scenario that is utilized to determine the relationship between supposed demand flexibility levels and achievable savings in a setting with variable renewable generation. The results, specifically discussed for a use case with real-world data for the La Graciosa island in Spain, show that boosting community participation and thus unlocking crucial demand flexibility, can be used as a powerful tool to augment novel generation technologies with savings from flexibility at around 7.5% of what is achieved purely by renewable sources. [ABSTRACT FROM AUTHOR]

Rooftop gardens ona building have proved to be a good way to improve its storm water management, but many other benefits can be obtained from the installation of these systems, such as reduction of energy consumption, decrease of the heat stress, abatement on CO2 emissions, etc. In this paper, the effect from the presence of these rooftop gardens on abuilding's energy consumption has been investigated by experimental campaigns using a green roof ona public building in a Mediterranean location in Spain. The obtained results demonstrate a substantial improvement by the installation of the green roof onthe building's cooling energy demand for a standard summer day, in the order of 30%, and a reduction, about 15%, in the heating energy demand for a winter day. Thus, given the longer duration of the summer conditions along the year, a noticeable reduction on energy demand could be obtained. Simulation analysis, using commercial software TRNSYS code, previously calibrated using experimental data for typical summer and winter days, allows for the extrapolation to the entire year of these results deducing noticeable improvement in energy efficiency, in the order of 19%, but with an increase of 6% in the peak power during the winter period. [ABSTRACT FROM AUTHOR]

The characteristics of the envelope of a building determine, together with other factors, its consumption of energy. Additionally, the climate zone and insulation material may vary the minimum insulation thickness of walls and roofs, making it different, according to cooling down or warming up the home. Spanish legislation establishes different maximum values for energy demand according to different climate area both for heating and for cooling. This paper presents the results of a study that determines the influence of many variables as the climate zone or the orientation, among others, in the optimization of thickness insulation in residential homes in Spain to reduce the CO2 emissions embodied. To do that, 12 representative cities in Spain corresponding to different climate zones, four orientations, two constructive solutions, and four different configurations of the same house have been combined, for three different hypotheses and four insulation materials, resulting in 4608 cases of study. The results show that, under equal conditions on energy demand, the optimal insulation requirements are determined by heating necessities more than by cooling ones. In addition, a higher insulation thickness need does not necessarily mean more CO2 emissions, since it can be compensated with a lower Global Warming Potential characterization factor that is associated to the insulation material. The findings of this study can serve to designers and architects to establish the better combination of the variables that are involved in order to minimize the CO2 emissions embodied during the construction phase of a building, making it more energy efficient. [ABSTRACT FROM AUTHOR]