Search

In the European Union, 40% of the overall final energy consumption is attributable to the buildings sector. A reason for such data may be found considering that the great majority of the building stock is more than 40 years old. According to the European Commission, an interesting potential lies in the refurbishment of the building sector, and heat pump technology has been recognized as one of the most cost-effective solutions to tackle the environmental issue of this sector. Regarding heat pump technology, ground-source heat pumps (GSHPs) have been proven to be the most efficient solution on equal boundary conditions. Despite this, in most EU states' markets, GSHPs hold only a small market share with respect to air-source heat pumps. In this paper, the state of art and possible future developments of GSHP technology have been reviewed together with a focus on the potential of such technology, most of all on the refurbishment of existing buildings, and on the obstacles to its spread. The state of art of borehole heat exchangers has been studied, focusing on the parameters characterizing the outside pipe and the pipe itself, i.e., pipe and grout materials. Moreover, an overview on the last developments involving refrigerants and secondary fluids is given. Finally, the design and control strategies of GSHPs have been reviewed. [ABSTRACT FROM AUTHOR]

The design phase of ground source heat pump systems is an extremely important one as many of the decisions made at that time can affect the system's energy performance as well as installation and operating costs. The current study examined the interpretation of thermal response testing measurements used to evaluate the equivalent ground thermal conductivity and thus to design the system. All the measurements were taken at the same geological site located in Molinella, Bologna (Italy) where a variety of borehole heat exchangers (BHEs) had been installed and investigated within the project Cheap-GSHPs (Cheap and efficient application of reliable Ground Source Heat exchangers and Pumps) of the European Union's Horizon 2020 research and innovation program. The measurements were initially analyzed in accordance with the common interpretation based on the first-order approximation of the solution for the infinite line source model and then by utilizing the complete solutions of both the infinite line and cylinder source models. An inverse numerical approach based on a detailed model that considers the current geometry of the BHE and the axial heat transfer as well as the effect of weather on the ground surface was also used. Study findings revealed that the best result was generally obtained using the inverse numerical interpretation. [ABSTRACT FROM AUTHOR]

In this study, the thermal behavior of the coaxial and double U borehole heat exchangers was investigated using numerical simulations in both the long- and short-term. As a reference for borehole heat exchanger specifications, the existing coaxial and double U probes of a geothermal heat pump installed within the Horizon 2020 research project named "Cheap GSHPs" were considered. Nine years of simulations revealed that when borehole heat exchangers are subjected to a balanced thermal load, and intermittent operating modes of the ground source heat pump system are set, the coaxial pipes' configuration provides better thermal performance due to the higher thermal capacitance of the heat-carrier fluid and the lower borehole thermal resistance. The analysis was conducted considering two different types of ground with different thermal conductivity values. As result, the more conductive ground type highlights the higher yield of the coaxial probe. [ABSTRACT FROM AUTHOR]