Search

Debris laser ranging (DLR) is receiving considerable attention as an accurate and effective method of determining and predicting the orbits of space debris. This paper reports some technologies of DLR, such as the high pulse repetition frequency (PRF) laser pulse, large-aperture telescope, telescope array, multi-static stations receiving signals. DLR with a picosecond laser at the Shanghai Astronomical Observatory is also presented. A few hundred laps of space debris laser-ranging measurements have been made. A double-pulse picosecond laser with an average power of 4.2 W, a PRF of 1 kHz, and a wavelength of 532 nm has been implemented successfully in DLR, it's the first time that DLR technology has reached a ranging precision at the sub-decimeter level. In addition, the characteristics of the picosecond-pulse-width laser transmission with the advantages of transmission in laser ranging were analyzed. With a mode of the pulse-burst picosecond laser having high average power, the DLR system has tracked small debris with a radar cross-section (RCS) of 0.91 m2 at a ranging distance up to 1726.8 km, corresponding to an RCS of 0.1 m2 at a distance of 1000 km. These works are expected to provide new technologies to further improve the performance of DLR. [ABSTRACT FROM AUTHOR]

Laser time transfer is of great significance in timing and global time synchronization. However, the temperature drift may occur and affect the delay of the electronics system, optic generation and detection system. This paper proposes a post-processing method for the compensation of temperature-induced system delay, which does not require any changes to the hardware setup. The temperature drift and time stability of the whole system are compared with and without compensation. The results show that the propagation delay drift as high as 240 ps caused by temperature changes is compensated. The temperature drift coefficient was diminished down to ~0.05 ps/°C from ~20.0 ps/°C. The system precision was promoted to ~2 ps from ~11 ps over a time period of 80,000 s. This method performs significant compensation of single-photon laser time transfer system propagation drift and will help to establish an ultra-stable laser time transfer link in space applications. [ABSTRACT FROM AUTHOR]