Search

This paper reports a fiber in-line Fabry–Perot interferometer (FPI) fabricated in a no-core fiber using the direct femtosecond laser writing technique for high-temperature sensing applications. Two in-line reflectors are directly inscribed in a no-core fiber to construct a low-finesse FPI. Fringe visibility greater than 10 dB is obtained from the reflection spectra of the fabricated no-core fiber FPIs. Temperature responses of a prototype no-core fiber FPI are characterized up to 1000 °C. The proposed configuration is compact and easy to fabricate, making it attractive for sensing applications in high-temperature harsh environments. [ABSTRACT FROM AUTHOR]

Optical fiber sensors that have a compact size and the capability for multi-parameter sensing are desired in various applications. This article reports a miniaturized optical fiber Fabry-Perot interferometric sensor with a length of hundreds of µm that is able to simultaneously measure variations of curvature, temperature, and strain. The sensor is easy to fabricate, requiring only the fusion splicing of a short section of the silica capillary tube between two single-mode fibers (SMFs). The combined mechanism of the Fabry-Perot interference occurred in the two interfaces between the capillary and the SMFs, and the antiresonant guidance induced by the capillary tube makes the device capable of realizing multi-parameter sensing. A simplified coefficient matrix approach is developed to decouple the contributions from different parameters. In addition, the capability of the device for multiplexing is investigated, where four such prototypes with different air cavity lengths are multiplexed in a system in parallel. The spectral behavior of an individual device for measuring curvature and strain is reconstructed and investigated, showing reliable responses and little crosstalk between different devices. The proposed device is easy to fabricate, cost-effective, robust, and could find potential applications in the field of structural health monitoring and medical and human–machine interactive sensing. [ABSTRACT FROM AUTHOR]

In this article, a new concept of microwave photonic (MWP) fiber ring resonator is introduced. In particular, the complex transmission spectra of the resonator in the microwave domain, including magnitude and phase spectra, are measured and characterized. Multiple resonance peaks are obtained in the magnitude spectrum; rapid variations in phase near resonance (i.e., enhanced group delay) are observed in the phase spectrum. We also experimentally demonstrate that the MWP fiber ring resonator can be potentially employed as a novel optical fiber sensor for macro-bending and fiber length change sensing (strain sensing). The experimental results are in good agreement with theoretical predictions. [ABSTRACT FROM AUTHOR]