Search

The LuTan-1 (LT-1) mission, China's first civilian bistatic spaceborne Synthetic Aperture Radar (SAR) mission, comprises two L-band SAR satellites. These satellites operate in bistatic InSAR strip map mode, maintaining a formation flight with an adjustable baseline to generate global digital elevation models (DEMs) with high accuracy and spatial resolution. This research introduces a dedicated interferometric calibration model for LT-1, tackling the unique challenges of the bistatic system, such as interferometric parameter coupling and the π -ambiguity problem caused by synchronization phase errors. This study validates the model using SAR images from LT-1 and Xinjiang corner reflector data, achieving interferometric phase accuracy better than 0.1 rad and baseline accuracy better than 2 mm, thereby producing high-precision DEMs with a height accuracy meeting the 5 m requirement. [ABSTRACT FROM AUTHOR]

In 2020, the BeiDou-3 global navigation satellite system (BDS-3) was officially completed and put into service. Currently, network real-time kinematic (RTK) technology is considered the main means through which to improve the positioning accuracy of the BeiDou navigation satellite system (BDS). This paper proposes a long-range undifferenced network RTK (URTK) algorithm, based on multi-frequency observation data of the BDS. First, the multi-frequency phase integer ambiguity resolution (AR) model considering atmospheric error parameters is designed, and the multi-frequency phase integer ambiguity of the long-range BDS reference station is determined. Then, the undifferenced integer ambiguity of each reference station is obtained, using linear variation based on the accurately determined phase integer ambiguity between reference stations, and the undifferenced observation error of each reference station is calculated. Considering the weakening spatial correlation of the observation errors between long-range stations, undifferenced classification error corrections of a reference station network are separated, according to different error characteristics. Finally, the inverse distance weighting method is employed to calculate the classification undifferenced error correction of the rover station. The rover station corrects the observation error through applying the undifferenced error correction to achieve high-precision positioning. The measured data of a long-range continuous operation reference station (CORS) network are selected for an experiment. The results show that the proposed algorithm can quickly and accurately realize the resolution of the BDS integer ambiguity of a reference station network and establish an undifferenced area error correction model in order to achieve accurate classification of undifferenced error correction values for a rover station. In China, the BDS-3 is superior to the global positioning system (GPS) in terms of the satellite number, position dilution of precision (PDOP) value, AR success rate, stability, and convergence time. The results show that the AR success rate, stability, and convergence time increase with the operational frequency, and the BDS-3 can achieve centimeter-level positioning of single-system rover stations without relying on the GPS. [ABSTRACT FROM AUTHOR]

The LuTan-1(LT-1), known as the L-band differential interferometric synthetic aperture radar (SAR) satellite system, is an essential piece of civil infrastructure in China, providing extensive applications such as surface deformation monitoring and topographic mapping. To achieve high-resolution and wide-swath (HRWS) observation abilities, the LT-1 takes the dual receiving antenna (DRA) imaging mode as its working mode. However, amplitude and phase errors between channels lead to a mismatch between the reconstruction filter and the multichannel echo signal, worsen the reconstructed azimuth spectrum, and introduce ambiguity targets in the final imaging results, seriously affecting the final imaging quality. In order to better evaluate the channel error and azimuth ambiguity performance of the LT-1 system, this paper proposed an advanced channel consistency correction method and conducted many measured data experiments. The experimental results show that the proposed method is effective, and the LT-1 system has excellent channel error control and azimuth ambiguity performance. [ABSTRACT FROM AUTHOR]

Urban logistics is important to a city's sustainable growth and development. With the increase in population and the economic growth in urban areas, the issue of congestion and the negative influence of transport of goods on people and the environment is one of the most important factors in the development of urban logistics. By determining the optimal location of urban logistics centres, total transport costs of logistics, the flow of goods in urban areas and the greenhouse gas emissions will be reduced. However, the traditional methods are easily influenced by the ambiguity of objective data, which makes it difficult to accurately describe the logistics demand in the urban area. To address this issue, the improved location–allocation model for urban logistics centres based on truck trajectory data is proposed. After extracting the origin–destination points, the logistics service demand can be estimated by the DBSCAN (density-based spatial clustering of applications with noise) clustering method. Then, the location–allocation of logistics centres is determined by an improved P-median method with the supply capacity limitation for simultaneous delivery of goods in the logistics centres. To validate the model, taking Wuhan, a central logistics city in China, as an example, the model can effectively ensure the equitable distribution of logistics facilities, minimize freight expenses, achieve more uniformity in logistics center services, and foster sustainable development of the city's logistics sector. [ABSTRACT FROM AUTHOR]

Job role ambiguity is becoming more and more common due to the increase in telecommuting caused by the COVID-19 epidemic. In order to understand the internal mechanism of the association between role ambiguity and creativity, this study examined it in the context of the Demands-Resources-Individual Effects (DRIVE) model. Participants were employees from all walks of life in mainland China, with a total of 437 valid data. The results showed that role ambiguity had no significant direct effect on creativity but exerted a negative effect on creativity through the chain mediating effect of affective rumination and perceived stress. A good relationship with a supervisor helped employees reduce their affective rumination when faced with the pressure of role ambiguity. The results show that how employees perceive role ambiguity plays an essential role in determining the potency of the after-effect of role ambiguity. Resources from supervisors can help reduce the negative perception of ambiguous roles.

Tomographic Synthetic Aperture Radar (TomoSAR) is a breakthrough of the traditional SAR, which has the three-dimentional (3D) observation ability of layover scenes such as buildings and high mountains. As an advanced system, the airborne array TomoSAR can effectively avoid temporal de-correlation caused by long revisit time, which has great application in high-precision mountain surveying and mapping. The 3D reconstruction using TomoSAR has mainly focused on low targets, while there are few literatures on 3D mountain reconstruction. Due to the layover phenomenon, surveying in high mountain areas remains a difficult task. Consequently, it is meaningful to carry out the research on 3D mountain reconstruction using the airborne array TomoSAR. However, the original TomoSAR mountain point cloud faces the problem of elevation ambiguity. Furthermore, for mountains with complex terrain, the points located in different elevation periods may intersect. This phenomenon increases the difficulty of solving the problem. In this paper, a novel elevation ambiguity resolution method is proposed. First, Density-Based Spatial Clustering of Applications with Noise (DBSCAN) and Gaussian Mixture Model (GMM) are combined for point cloud segmentation. The former ensures coarse segmentation based on density, and the latter allows fine segmentation of the abnormal categories caused by intersection. Subsequently, the segmentation results are reorganized in the elevation direction to reconstruct all possible point clouds. Finally, the real point cloud can be extracted automatically under the constraints of the boundary and elevation continuity. The performance of the proposed method is demonstrated by simulations and experiments. Based on the airborne array TomoSAR experiment in Leshan City, Sichuan Province, China in 2019, the 3D model of the surveyed mountain is presented. Moreover, three kinds of external data are applied to fully verify the validity of this method. [ABSTRACT FROM AUTHOR]

High-precision and low-cost single-frequency precise point positioning (SF-PPP) has been attracting more and more attention in numerous global navigation satellite system (GNSS) applications. To provide the precise ionosphere delay and improve the positioning accuracy of the SF-PPP, the dual-frequency receiver, which receives dual-frequency observations, is used. Based on the serviced precise ionosphere delay, which is generated from the dual-frequency observations, the high-precision SF-PPP is realized. To further improve the accuracy of the SF-PPP and shorten its convergence time, the double-differenced (DD) ambiguity resolutions, which are generated from the DD algorithm, are introduced. This method avoids the estimation of fractional cycle bias (FCB) for the SF-PPP ambiguity. Here, we collected data from six stations of Shanghai China which was processed, and the corresponding results were analyzed. The results of the dual-frequency observations enhanced SF-PPP realize centimeter-level positioning. The difference between the results of two stations estimated with dual-frequency observations enhanced SF-PPP were compared with the relative positioning results computed with the DD algorithm. Experimental results showed that the relative positioning accuracy of the DD algorithm is slightly better than that of the dual-frequency observations enhanced SF-PPP. This could be explained by the effect of the float ambiguity resolutions on the positioning accuracy. The data was processed with the proposed method for the introduction of the DD ambiguity into SF-PPP and the results indicated that this method could improve the positioning accuracy and shorten the convergence time of the SF-PPP. The results could further improve the deformation monitoring ability of SF-PPP. [ABSTRACT FROM AUTHOR]

The advancements of Earth observations, remote sensing, communications and navigation augmentation based on low Earth orbit (LEO) platforms present strong requirements for accurate, real-time and autonomous navigation of LEO satellites. Precise onboard real-time orbit determination (RTOD) using the space-borne data of multiple global navigation satellite systems (multi-GNSS) becomes practicable along with the availability of multi-GNSS. We study the onboard RTOD algorithm and experiments by using America's Global Positioning System (GPS) and China's regional BeiDou Navigation Satellite System (BDS-2) space-borne data of the FengYun-3C satellite. A new pseudo-ambiguity parameter, which combines the constant phase ambiguity, the orbit and clock offset error of the GPS/BDS broadcast ephemeris in the line-of-sight (LOS), is defined and estimated in order to reduce the negative effect of the LOS error on onboard RTOD. The analyses on the variation of the LOS error in the GPS/BDS broadcast ephemeris indicate that the pseudo-ambiguity parameter could be modeled as a random walk, and the setting of the power spectral density in the random walk model decides whether the pseudo-ambiguity can be estimated reasonably and the LOS error could be reduced or not. For different types of GPS/BDS satellites, the LOS errors show different variation characteristics, so the power spectral density should be set separately and differently. A numerical search approach is presented in this paper to find the optimal setting of the power spectral density for each type of GPS/BDS satellite by a series of tests. Based on the optimal stochastic model, a 3-dimensional (3D) real-time orbit accuracy of 0.7–2.0 m for position and 0.7–1.7 mm/s for velocity could be achieved only with dual-frequency BDS measurements and the broadcast ephemeris, while a notably superior orbit accuracy of 0.3–0.5 m for position and 0.3–0.5 mm/s for velocity is achievable using dual-frequency GPS/BDS measurements, due to the absorption effect of the estimated pseudo-ambiguity on the LOS error of the GPS/BDS broadcast ephemeris. Compared to using GPS-alone data, the GPS/BDS fusion only marginally improves the onboard RTOD orbit accuracy by about 1–3 cm, but the inclusion of BDS satellites increases the number of the tracked GNSS satellites and thus speeds up the convergence of the filter. Furthermore, the GPS/BDS fusion could help suppress the local orbit errors, ensure the orbit accuracy and improve the reliability and availability of the onboard RTOD when fewer GPS satellites are tracked in some anomalous arcs. [ABSTRACT FROM AUTHOR]