Search

Online monitoring and real-time feedback on inclusions in molten metal are essential for metal quality control. However, existing methods for detecting aluminum melt inclusions face challenges, including interference, prolonged processing times, and latency. This paper presents the design and development of an online monitoring system for molten metal inclusions. Initially, the system facilitates real-time adjustment of signal acquisition parameters through a multiplexer. Subsequently, it employs a detection algorithm capable of swiftly extracting pulse peaks, with this task integrated into our proprietary host computer software to ensure timely detection and data visualization. Ultimately, we developed a monitoring device integrated with this online monitoring system, enabling the online monitoring of the aluminum alloy filtration process. Our findings indicate that the system can accurately measure the size and concentration of inclusions during the filtration process in real time, offering enhanced detection speed and stability compared to the industrial LiMCA CM (liquid metal cleanliness analyzer continuous monitoring) standard. Furthermore, our evaluation of the filtration process demonstrates that the effectiveness of filtration significantly improves with the increase in inclusion sizes, and the synergistic effect of combining CFF (ceramic foam filter) and MCF (metallics cartridge filter) filtration methods exceeds the performance of the CFF method alone. This system thus provides valuable technical support for optimizing filtration processes and controlling inclusion quality. [ABSTRACT FROM AUTHOR]

In this study, we developed an endoscopic hyperspectral imaging (eHSI) system and evaluated its performance in analyzing tissues within tissue phantoms and orthotopic mouse pancreatic tumor models. Our custom-built eHSI system incorporated a liquid crystal tunable filter. To assess its tissue discrimination capabilities, we acquired images of tissue phantoms, distinguishing between fat and muscle regions. The system underwent supervised training using labeled samples, and this classification model was then applied to other tissue phantom images for evaluation. In the tissue phantom experiment, the eHSI effectively differentiated muscle from fat and background tissues. The precision scores regarding fat tissue classification were 98.3% for the support vector machine, 97.7% for the neural network, and 96.0% with a light gradient-boosting machine algorithm, respectively. Furthermore, we applied the eHSI system to identify tumors within an orthotopic mouse pancreatic tumor model. The F-score of each pancreatic tumor-bearing model reached 73.1% for the KPC tumor model and 63.1% for the Pan02 tumor models. The refined imaging conditions and optimization of the fine-tuning of classification algorithms enhance the versatility and diagnostic efficacy of eHSI in biomedical applications. [ABSTRACT FROM AUTHOR]

Nonlinear ultrasonic non-destructive testing (NDT) is a widely used method for detecting micro-damages in various materials and structures due to its high sensitivity and directional capability. However, the extraction and modulation of extremely weak nonlinear ultrasonic signals is quite a challenge in practical applications. Therefore, this paper focuses on the second harmonic modulation signal method in nonlinear ultrasonic NDT and proposes the design of the phononic crystal filter (PC filter) to achieve this filtering function. Through finite element simulations, it is demonstrated that the filtering frequency of the filter is influenced by the structural configuration, material wave speed, and geometric characteristics. Then, the design method for cubic PC filters is established. Furthermore, a time-domain finite element method is introduced to verify the filtering ability of the filter and further validate the rationality of this design approach. [ABSTRACT FROM AUTHOR]

Background: Alzheimer's disease (AD), along with other neurodegenerative disorders, remains a challenge for clinicians, mainly because of the incomplete knowledge surrounding its etiology and inefficient therapeutic options. Considering the central role of amyloid beta (Aβ) in the onset and evolution of AD, Aβ-targeted therapies are among the most promising research directions. In the context of decreased Aβ elimination from the central nervous system in the AD patient, the authors propose a novel therapeutic approach based on the "Cerebrospinal Fluid Sink Therapeutic Strategy" presented in previous works. This article aims to demonstrate the laborious process of the development and testing of an effective nanoporous ceramic filter, which is the main component of an experimental device capable of filtrating Aβ from the cerebrospinal fluid in an AD mouse model. Methods: First, the authors present the main steps needed to create a functional filtrating nanoporous ceramic filter, which represents the central part of the experimental filtration device. This process included synthesis, functionalization, and quality control of the functionalization, which were performed via various spectroscopy methods and thermal analysis, selectivity measurements, and a biocompatibility assessment. Subsequently, the prototype was implanted in APP/PS1 mice for four weeks, then removed, and the nanoporous ceramic filter was tested for its filtration capacity and potential structural damages. Results: In applying the multi-step protocol, the authors developed a functional Aβ-selective filtration nanoporous ceramic filter that was used within the prototype. All animal models survived the implantation procedure and had no significant adverse effects during the 4-week trial period. Post-treatment analysis of the nanoporous ceramic filter showed significant protein loading, but no complete clogging of the pores. Conclusions: We demonstrated that a nanoporous ceramic filter-based system that filtrates Aβ from the cerebrospinal fluid is a feasible and safe treatment modality in the AD mouse model. The presented prototype has a functional lifespan of around four weeks, highlighting the need to develop advanced nanoporous ceramic filters with anti-biofouling properties to ensure the long-term action of this therapy. [ABSTRACT FROM AUTHOR]

Low-cost, long-term measures of air pollution concentrations are often needed for epidemiological studies and policy analyses of household air pollution. The Washington passive sampler (WPS), an ultra-low-cost method for measuring the long-term average levels of light-absorbing carbon (LAC) air pollution, uses digital images to measure the changes in the reflectance of a passively exposed paper filter. A prior publication on WPS reported high precision and reproducibility. Here, we deployed three methods to each of 10 households in Ulaanbaatar, Mongolia: one PurpleAir for PM2.5; two ultrasonic personal aerosol samplers (UPAS) with quartz filters for the thermal-optical analysis of elemental carbon (EC); and two WPS for LAC. We compared multiple rounds of 4-week-average measurements. The analyses calibrating the LAC to the elemental carbon measurement suggest that 1 µg of EC/m3 corresponds to 62 PI/month (R2 = 0.83). The EC-LAC calibration curve indicates an accuracy (root-mean-square error) of 3.1 µg of EC/m3, or ~21% of the average elemental carbon concentration. The RMSE values observed here for the WPS are comparable to the reported accuracy levels for other methods, including reference methods. Based on the precision and accuracy results shown here, as well as the increased simplicity of deployment, the WPS may merit further consideration for studying air quality in homes that use solid fuels. [ABSTRACT FROM AUTHOR]

To investigate the fluid flow characteristics of conventional Ceramic Foam Filters (CFFs) of grades 30 and 50, a 2D macro-scale geometry was generated by converting pixel grid images of the filters into vector format images. The flow behaviour through the filter channels was then numerically modelled using the Stocks equation within the Creeping Flow interface of COMSOL Multiphysics®. Through modelling, the average interstitial velocity was estimated and found to be higher than the corresponding value obtained from the Dupuit–Forchheimer equation. The discrepancy obtained suggested that the flow behaviour within the filter channels differed from that based on the simplified assumptions of the equation. The porosity and permeability of the CFFs were evaluated during the post-processing stage using surface integration and user-defined equations. The experimentally determined porosity closely matched the values obtained from the simulation model, demonstrating the reliability of the numerical approach. However, the permeability values from the simulation of CFFs of grades 30 and 50 were higher than those obtained experimentally. This discrepancy can be attributed to the larger channels in the generated geometrical pattern compared to the original CFF structure. The present findings highlight the effectiveness of the proposed methodology in developing a representative macro-scale geometry for CFFs and in simulating fluid flow behaviour. [ABSTRACT FROM AUTHOR]

Ceramic Foam Filters (CFF) are frequently used during the filtration of aluminum (Al) melts to produce high-quality products. In the present study, the physical and hydraulic characteristics of alumina (Al2O3)-based CFF from three different suppliers (A, B and C) have been thoroughly investigated. The filters' porosity and pore diameter, i.e., Window and Cell Feret diameters, were measured and the permeability of the different filters calculated based on pressure drop experiments. The comparison of the classification systems of CFF, i.e., Grade and PPI (Pore Per Inch) numbers, using statistical analysis of permeability and Window Feret diameter showed significant variations between the morphological and hydraulic properties of some CFFs of identical Grade and PPI numbers. Moreover, the Fanning friction factor was plotted as a function of interstitial Reynolds numbers (Rei), and laminar, transient, and turbulent flow regimes were identified. The relationship between the Fanning friction factor and the interstitial Reynolds numbers of all the filter samples investigated was processed using regression analysis, and a model equation developed to calculate the pressure drop over the CFF using the Window Feret diameter. The correlation between the experimental pressure drop values and the derived model equation indicates that empirical expressions for calculating the pressure drop over CFFs should be derived based on experimental measurements carried out at the velocity range of the application of the CFF, which is about 10 mm·s−1 for aluminum filtration. [ABSTRACT FROM AUTHOR]

Biomass gasification is one of the most promising routes to produce green hydrogen, power, fuels, and chemicals, which has drawn much attention as the world moves away from fossil fuels. Syngas produced from gasification needs to go through an essential gas cleanup step for the removal of tars and particulates for further processing, which is one of the cost-inducing steps. Existing hot gas cleanup strategies involve the particulate removal step followed by catalytic tar reforming, which could be integrated into a single unit operation using porous ceramics owing to their advantages including high-temperature resistance, high corrosion resistance, flexibility, and robust mechanical integrity. Ceramic filters have proven to be effective at filtering particulates from hot gas streams in various applications including combustion, incineration, gasification, and pyrolysis. These materials have also been evaluated and used to an extent as catalyst support to remove contaminants such as nitrogen oxides (NOx), volatile organic compounds (VOC), and in particular, tars, however, the use of these ceramic materials to remove both tars and particulates in one unit has not received much attention, although it has a promising potential to be a cost-effective hot gas cleanup strategy. Thus, this review presents the ability of catalytic ceramic filters to boost energy efficiency by converting unwanted byproducts while simultaneously eliminating PM in a single unit and is shown to be valuable in industrial processes across the board. This article presents a comprehensive and systematic overview and current state of knowledge of the use of porous ceramics for catalytic hot gas filtration applications with an emphasis on biomass syngas cleanup. In addition, a similar strategy for other applications such as combustion exhaust streams is presented. Prospects and challenges of taking this approach, and the necessary research and development to advance the novel use of reactive ceramic filters within biomass-fed thermal systems are presented. Major challenges include the low surface area of the ceramic filter media and high-pressure drop across the filter media, which can be overcome by wash coating or dip coating mechanisms and porosity tailored to meet the requirements. Owing to limited R&D efforts in this area, a systematic approach toward developing these integrated hot gas filtration systems is much needed, which will ultimately contribute to cost-effective green hydrogen production. [ABSTRACT FROM AUTHOR]

Today, the pollution caused by a multitude of pharmaceuticals used by humans has been recognized as a major environmental problem. The objective of this study was to evaluate and compare the photocatalytic degradation of ten target psychiatric drugs in hospital wastewater effluents using g-C3N4 and 1%MoS2/g-C3N4 (1MSCN) as photocatalytic materials. The experiments were performed using real wastewater samples collected from hospital wastewater treatment plant (WWTP) secondary effluent in spiked and inherent pharmaceutical concentration levels. The photocatalytic experiments were performed in a laboratory-scale pilot plant composed of a stainless-steel lamp reactor (46 L) equipped with ten UVA lamps and quartz filters connected in series with a polypropylene recirculation tank (55–100 L). In addition, experiments were carried out in a solar simulator apparatus Atlas Suntest XLS+ at a 500 Wm−2 irradiation intensity. The analysis of the samples was accomplished by solid-phase extraction, followed by liquid chromatography-Orbitrap high-resolution mass spectrometry. Results showed that the photocatalytic degradation of pharmaceutical compounds followed first-order kinetics. In all cases, 1MSCN presented higher photocatalytic performance than g-C3N4. The removal rates of the pharmaceutical compounds were determined above 30% and 54% using g-C3N4 and 1MSCN, respectively. Parallel to kinetic studies, the transformation products (TPs) generated during the treatment were investigated. [ABSTRACT FROM AUTHOR]

This work concerns the activities of the European project BLAZE that aims to integrate a pilot-scale gasifier unit with a Solid Oxide Fuel Cell (SOFC). The objective is to identify the optimal operating conditions for a gasifier and hot gas cleaning and conditioning unit to produce H2-rich syngas with contaminants levels within the limits for the safe operation of the SOFC (750 mg/Nm3 and 75 mg/Nm3 for toluene and naphthalene, respectively). Experimental tests were carried out on a bench-scale gasification plant with a catalytic filter candle placed in the freeboard, to study the influence of temperature (1032 up to 1137 K), bed materials (olivine or olivine/dolomite 80/20%), and a nickel-based catalyst. The tests with a ceramic filter candle filled with catalyst and the mixture of olivine and dolomite in the bed gave the best results in terms of gas composition and gas yield, but the tar content was still higher than the limits for the SOFC. To increase the residence time of the gas in the catalytic bed a new metallic filter candle was tested. This candle, with almost the same external volume, allowed doubling the amount of catalyst used. Under these conditions, the content of toluene and naphthalene was reduced below 150 and 50 mg/Nm3, respectively. [ABSTRACT FROM AUTHOR]

The need to regulate the non-exhaust particulate matter (PM) emissions from vehicles has been discussed worldwide due to the bad environmental impact and the toxicity to the human body. In-depth studies have been precisely conducted on the analysis of the non-exhaust particulate matters, in particular, the amount of tire, brake and road wear particles and their proportion in the atmosphere. In this study, the influence of tire and road wear particles (TRWP) on PM in the atmosphere was investigated with tire and PM samples. The PM samples suspended in the atmosphere were collected with a high-volume sampler equipped with a quartz filter. Additionally, polycyclic aromatic hydrocarbons (PAHs) and metal components in tire rubber were analyzed as markers by pyrolysis–gas chromatography/mass spectrometry (pyrolysis–GC/MS), GC/MS, and inductively coupled plasma/mass spectrometry (ICP/MS). More vinylcyclohexene was detected than dipentene in the markers measured in the samples of tires equipped with vehicles driving on the road, while more dipentene was measured in total suspended particles (TSP) samples. Among the PAHs in tire samples, pyrene exhibited the highest concentration. Benzo(b)fluoranthene showed the highest concentration in the TSP samples. Among the metals, the highest concentration was zinc in all tire samples and calcium in TSP samples. [ABSTRACT FROM AUTHOR]

An optical filter is one of the indispensable devices in massive and high-speed communication, optical signal processing, and display. Twist-structure liquid crystals, cholesteric liquid crystals, blue-phase liquid crystals, and sphere-phase liquid crystals show potential application in optical filters originating from the periodic nanostructures. Wavelength and bandwidth tuning can be controlled via temperature, electric fields, light, angle, spatial control, and templating technology. In this review, we discuss the recent developments of twist-structure liquid crystal filters. [ABSTRACT FROM AUTHOR]

In many energy and process engineering systems where fluids are processed, droplet-laden gas flows may occur. As droplets are often detrimental to the system's operation, they need to be removed. Compact engineering solutions for the removal of entrained droplets are difficult to achieve with conventional flow control and heat transfer approaches and thus droplet removal devices are hence often costly and bulky. In this study, we analyzed the potential of a compact technology based on droplet capture and in situ evaporation by microwave heating. For that, we designed a microwave applicator containing a porous droplet separator for capturing and evaporating droplets. The application of open-cell ceramic foams as filter medium reduced 99.9% of the volumetric flow of droplets, while additional microwave exposure increases reduction to 99.99%. In addition, microwave-heated foams prevent droplet re-entrainment and structure-borne liquid accumulation within foams, thus avoiding water clogging and flooding. [ABSTRACT FROM AUTHOR]

Fouling control coatings (FCCs) are used to prevent the accumulation of marine biofouling on, e.g., ship hulls, which causes increased fuel consumption and the global spread of non-indigenous species. The standards for performance evaluations of FCCs rely on visual inspections, which induce a degree of subjectivity. The use of RGB images for objective evaluations has already received interest from several authors, but the limited acquired information restricts detailed analyses class-wise. This study demonstrates that hyperspectral imaging (HSI) expands the specificity of biofouling assessments of FCCs by capturing distinguishing spectral features. We developed a staring-type hyperspectral imager using a liquid crystal tunable filter as the wavelength selective element. A novel light-emitting diode illumination system with high and uniform irradiance was designed to compensate for the low-filter transmittance. A spectral library was created from reflectance-calibrated optical signatures of representative biofouling species and coated panels. We trained a neural network on the annotated library to assign a class to each pixel. The model was evaluated on an artificially generated target, and global accuracy of 95% was estimated. The classifier was tested on coated panels (exposed at the CoaST Maritime Test Centre) with visible intergrown biofouling. The segmentation results were used to determine the coverage percentage per class. Although a detailed taxonomic description might be complex due to spectral similarities among groups, these results demonstrate the feasibility of HSI for repeatable and quantifiable biofouling detection on coated surfaces. [ABSTRACT FROM AUTHOR]

Oxidative stress induced by fine particulate matter 2.5 (PM2.5) is a potential cause of adverse health effects owing to the production of reactive oxygen species (ROS). Air filtration is a key technology for preventing exposure to particulate contaminations; however, particulate matter trapped by filters has the potential risk of human contact with condensed PM2.5. Thus, this study aims to reduce the hydroxyl radical (·OH) production potential of PM2.5 collected on such TiO2-supporting quartz filters. The ·OH production potential was evaluated for PM2.5, which was collected in Kanagawa, Japan, using a terephthalate assay coupled with flow injection analysis. Although the PM2.5 levels at the sampling site were not severe, the PM2.5 samples exhibited ·OH production potential, which was mostly attributed to organic aerosols. The effect was verified using a TiO2-supporting quartz filter for the collection and subsequent degradation of PM2.5. The ·OH production potential was significantly reduced from 0.58 ± 0.40 pmol/(min m3) to 0.22 ± 0.13 pmol/(min m3) through ultraviolet irradiation for 24 h. This suggests that the photocatalytic reaction of the TiO2 filter is effective in reducing the ·OH production potential of PM2.5. [ABSTRACT FROM AUTHOR]

The development of environmentally friendly technologies, including additive technologies, contributes to the formation of sustainable production in city multifloor manufacturing clusters (CMFMCs). This paper discusses an approach to the implementation of energy-intensive technological processes in such clusters using examples of the manufacturing of ceramic and metal–ceramic products. The manufacturing of ceramic and metal–ceramic products in high-temperature furnaces is associated with an increased electricity consumption. The use of modern ceramic micro- and nanopowders makes it possible to switch to more energy-saving technologies by reducing the sintering temperature and shortening the technological cycle. This requires the use of additional activating and inhibiting additives in the initial powder mixtures to obtain products with the necessary physical and mechanical properties. The purpose of this paper is to present a model and indicators to assess the energy efficiency of the choice of sintering technology of foam ceramic filters for smart sustainable production management within CMFMCs. The use of the proposed indicators for assessing the energy efficiency of sintering foam ceramic filters makes it possible to improve the technological process and reduce the completion time of its thermal cycle by 19%, and reduce the maximum heating temperature by 20% to 1350 °C. The adoption of a different oxide technological alternative and the use of the proposed model and indicators to assess the energy efficiency of the sintering technology of foam ceramic filters allows to choose less energy-intensive equipment and save up to 40% in electricity. The proposed model to assess the energy efficiency of the sintering technology of foam ceramic filters can be used to control their production under the power consumption limitations within the CMFMCs. [ABSTRACT FROM AUTHOR]

A correction notice has been issued for an article titled "Hydraulic Characterization of Ceramic Foam Filters Used in Aluminum Filtration." The mistake in the original publication was in Table 6, which was empty instead of containing the intended information. The corrected table has been provided, and it does not affect the scientific conclusions of the study. The correction was approved by the Academic Editor, and the original publication has been updated accordingly. [Extracted from the article]

An innovative hyperspectral LIDAR instrument has been developed for applications in marine environment monitoring research activities, remotely detecting the fluorescence spectra produced in the spectral interval between 400 nm and 720 nm. The detection system is composed by a custom made photomultiplier charge integrating and measuring (CIM) unit, which makes automatic background signal subtraction, and a liquid crystal tunable filter (LCTF). The new instrument therefore has hyperspectral resolution and allows automatic background subtraction; it is compact and automated by custom software that permit to adapt the instrument properties depending on the environmental conditions. Laboratory tests to characterize the instrument performance have been carried out, concluding that this sensor can be employed in remote sites for Chl-a detection. [ABSTRACT FROM AUTHOR]

Since mechanical stress in structures affects issues such as strength, expected operational life and dimensional stability, a continuous stress monitoring scheme is necessary for a complete integrity assessment. Consequently, this paper proposes a stress monitoring scheme for cylindrical specimens, which are widely used in structures such as pipelines, wind turbines or bridges. The approach consists of tracking guided wave variations due to load changes, by comparing wave statistical patterns via Principal Component Analysis (PCA). Each load scenario is projected to the PCA space by means of a baseline model and represented using the Q-statistical indices. Experimental validation of the proposed methodology is conducted on two specimens: (i) a 12.7 mm ( 1/2'' ) diameter, 0.4 m length, AISI 1020 steel rod, and (ii) a 25.4 mm ( 1'' ) diameter, 6m length, schedule 40, A-106, hollow cylinder. Specimen 1 was subjected to axial loads, meanwhile specimen 2 to flexion. In both cases, simultaneous longitudinal and flexural guided waves were generated via piezoelectric devices (PZTs) in a pitch-catch configuration. Experimental results show the feasibility of the approach and its potential use as in-situ continuous stress monitoring application. [ABSTRACT FROM AUTHOR]

Seasonal characteristics of PM2.5, organic carbon (OC) and elemental carbon (EC) were studied in Taiyuan from 2009 to 2010. PM2.5 samples were collected by pre-baked quartz filters with high-volume air sampler, and then OC and EC were analyzed by thermal/optical reflectance method. The annual average concentrations of PM2.5, OC and EC were 220.2, 37.4 and 19.6 µg/m³ respectively, which were higher than those in most regions in China. Total carbonaceous aerosol (TCA) accounted for more than one third of the total PM2.5 mass. The levels of PM2.5, OC and EC were the highest in winter, followed by spring, fall and summer. OC and EC were well correlated in summer compared with other seasons, indicating the presence of other additional sources such as biomass burning in fall, coal combustion for heating in winter and dust in spring. Higher OC/EC ratios in winter might be primarily attributed to the significant increase of direct emission of OC as a result of coal and biomass combustion, and also cooling effect of carbonaceous aerosols due to low temperature and stagnated atmospheric condition. These results showed that the pollution of carbonaceous particles in Taiyuan was serious, and might be an inducing factor of dust haze, especially in winter. [ABSTRACT FROM AUTHOR]

The airborne route of transmission of SARS-CoV-2 was confirmed by the World Health Organization in April 2021. There is an urge to establish standardized protocols for assessing the concentration of SARS-CoV-2 RNA in air samples to support risk assessment, especially in indoor environments. Debates on the airborne transmission route of SARS-CoV-2 have been complicated because, among the studies testing the presence of the virus in the air, the percentage of positive samples has often been very low. In the present study, we report preliminary results on a study for the evaluation of parameters that can influence SARS-CoV-2 RNA recovery from quartz fiber filters spotted either by standard single-stranded SARS-CoV-2 RNA or by inactivated SARS-CoV-2 virions. The analytes were spiked on filters and underwent an active or passive sampling; then, they were preserved at −80 °C for different numbers of days (0 to 54) before extraction and analysis. We found a mean recovery of 2.43%, except for the sample not preserved (0 days) that showed a recovery of 13.51%. We found a relationship between the number of days and the recovery percentage. The results presented show a possible issue that relates to the quartz matrix and SARS-CoV-2 RNA recovery. The results are in accordance with the already published studies that described similar methods for SARS-CoV-2 RNA field sampling and that reported non-detectable concentrations of RNA. These outcomes could be false negatives due to sample preservation conditions. Thus, until further investigation, we suggest, as possible alternatives, to keep the filters: (i) in a sealed container for preservation at 4 °C; and (ii) in a viral transport medium for preservation at a temperature below 0 °C. [ABSTRACT FROM AUTHOR]

This paper describes a low-temperature metallization and laser trimming process for microwave dielectric ceramic filters. The ceramic was metalized by electroless copper plating at a temperature lower than those of conventional low-temperature co-fired ceramic (LTCC) and direct bond copper (DBC) methods. Compared with filters made via traditional silver paste sintering, the metal in the holes of the microwave dielectric filters is uniform, smooth, and does not cause clogging nor become detached. Further, the batches of fabricated filters do not require individual inspection, reducing energy, labor, cost, and time requirements. A microwave dielectric filter was then manufactured from the prepared ceramic using a laser trimming machine with a line width and position error within ±50 μm; this demonstrates a more accurately controlled line width than that offered by screen printing. After using HFSS software simulations for preliminary experiments, the microwave dielectric filter was tuned to a target Wi-Fi band of 5.15–5.33 GHz; the return loss was <−10 dB, and the insertion loss was >−3 dB. To implement the real-world process, the laser parameters were optimized. Laser trimming has a higher success rate than traditional manual trimming, and the microwave dielectric filter manufactured here verified the feasibility of this process. [ABSTRACT FROM AUTHOR]

Cholesteric liquid crystals (CLCs) have been widely applied in optical filters due to Bragg reflection caused by their helical structure. However, the reflectivity of CLC filters is relatively low, commonly less than 50%, as the filters can only reflect light polarized circularly either left- or right-handedly. Therefore, a high-reflective CLC filter with a single-layer template was proposed which may reflect both right- and left-handed polarized light. The CLC filters of the red, green, blue color were fabricated by the templating technology, which show good wavelength consistency. Additionally, a multi-phase liquid crystal filter with high reflectance was demonstrated by the single-layer templating technology. The templated CLC or multi-phase liquid crystal filters show great potential applications in the optical community, reflective display, and lasing. [ABSTRACT FROM AUTHOR]

This paper presents a study on the application of a ceramic filter in the biomass gasification process and its efficiency in particulate matter removal from the process gas and flue gas. A significant advantage of this type of filter is its high efficiency in small particle removal (<1 µm). This feature allows us to reach the much lower emissions that are required by the applicable standards. The study was performed using an original biomass gasification installation, where conifer scobs were used as feedstock. The installation, its operation and measurement methodology are described in the article. The study included the analysis of process gas and particulate matter, as well as particulate matter content before and after the filter was applied. The measurements indicate that the efficiency of particulate matter removal reaches 99.1%. The analysis of particulate matter in the process gas allowed us to determine that its content was 18.26%, and additionally it was indicated that it contained combustible parts, which undergo combustion in the combustion chamber. It was found that the content of particulate matter is reduced 11 times when compared to the process gas before the filter. An accurate estimation of particulate matter content in flue gas has been also shown for the system without the ceramic filter. As a result, the method allowed us to determine the overall efficiency of particulate matter removal using the ceramic filter, which is equal to 99.9% or 2 mg/m3 (N). The performed study shows that pre-combustion particulate matter removal is preferred over post-combustion particulate matter removal from flue gas. The reason is that the stream of process gas is several times smaller than the flue gas stream, thus the required size of the filter is smaller. Furthermore, process gas filtering allows us to keep the heat transfer surfaces clean, which preserves high thermal efficiency and durability of equipment. The presented results of performed tests are the early stage of the development of the technology of process gas refining in the waste gasification process. The final target is to reach standards similar to those in the case of natural gas. [ABSTRACT FROM AUTHOR]

Tar in the product gas of biomass gasifiers reduces the efficiency of gasification processes and causes fouling of system components and pipework. Therefore, an efficient tar conversion in the product gas is a key step of effective and reliable syngas production. One of the most promising approaches is the catalytic decomposition of the tar species combined with hot syngas cleaning. The catalyst must be able to convert tar components in the synthesis gas at temperatures of around 700 °C downstream of the gasifier without preheating. A Ni-based doped catalyst with high activity in tar conversion was developed and characterized in detail. An appropriate composition of transition metals was applied to minimize catalyst coking. Precious metals (Pt, Pd, Rh, or a combination of two of them) were added to the catalyst in small quantities. Depending on the hot gas cleaning system used, both transition metals and precious metals were co-impregnated on pellets or on a ceramic filter material. In the case of a pelletized-type catalyst, the hot gas cleaning system revealed a conversion above 80% for 70 and 110 h. The catalyst composed of Ni, Fe, and Cr oxides, promoted with Pt and impregnated on a ceramic fiber filter composed of Al2O3(44%)/SiO2(56%), was the most active catalyst for a compact cleaning system. This catalyst was catalytically active with a naphthalene conversion of around 93% over 95 h without catalyst deactivation. [ABSTRACT FROM AUTHOR]

The concentrations of water-soluble anions present in PM10 collected from ambient air in four sites of Costa Rica's greater metropolitan area (GAM) were analyzed. Samples were collected over a 24-h period for three days during the 2011–2018 period, using high-volume air samplers with mass flow controller. The PM10 samples were collected using quartz fiber filters, which were analyzed using ion chromatography to identify organic and inorganic ions. The annual averages for PM10, F−, Cl−, and SO42− showed significant differences between the sampling sites, with Uruca (UR) consistently registering annual averages above the maximum concentration established by Costa Rica's air quality regulations (30 µgm−3). The ions analyzed contributed 33%, 34%, 35%, and 37% of the PM10 mass for sampling sites UR, HA, AL, and CA, respectively. Using Spearman correlations and principal component analysis (PCA), the following contributions were identified: biomass burning, secondary particle formation processes from mobile and stationary emissions, and biogenic emissions. For each variable, seasonal patterns and trends were analyzed using time series with additive decomposition. [ABSTRACT FROM AUTHOR]

Multi-reflective peak and bandwidth scalable liquid crystal (LC) filters were investigated. By refilling a cholesteric LC (CLC) whose chiral pitch is different to the target template into a blue phase LC (BPLC) template, a multi-reflective peak single layer LC filter can be fabricated. With multiple templating and refilling processes, the number of reflective peaks can be further increased. Moreover, by refilling the CLCs of designed chiral pitch into a CLC template sequentially, a bandwidth scalable single layer CLC filter can be fabricated. The LC filters show great potential applications in optical communication, display, and LC lasing. [ABSTRACT FROM AUTHOR]

Respirable coal mine dust (RCMD) exposure is associated with black lung and silicosis diseases in underground miners. Although only RCMD mass and silica concentrations are regulated, it is possible that particle size, surface area, and other chemical constituents also contribute to its adverse health effects. This review summarizes measurement technologies for RCMD mass concentrations, morphology, size distributions, and chemical compositions, with examples from published efforts where these methods have been applied. Some state-of-the-art technologies presented in this paper have not been certified as intrinsically safe, and caution should be exerted for their use in explosive environments. RCMD mass concentrations are most often obtained by filter sampling followed by gravimetric analysis, but recent requirements for real-time monitoring by continuous personal dust monitors (CPDM) enable quicker exposure risk assessments. Emerging low-cost photometers provide an opportunity for a wider deployment of real-time exposure assessment. Particle size distributions can be determined by microscopy, cascade impactors, aerodynamic spectrometers, optical particle counters, and electrical mobility analyzers, each with unique advantages and limitations. Different filter media are required to collect integrated samples over working shifts for comprehensive chemical analysis. Teflon membrane filters are used for mass by gravimetry, elements by energy dispersive X-ray fluorescence, rare-earth elements by inductively coupled plasma-mass spectrometry and mineralogy by X-ray diffraction. Quartz fiber filters are analyzed for organic, elemental, and brown carbon by thermal/optical methods and non-polar organics by thermal desorption-gas chromatography-mass spectrometry. Polycarbonate-membrane filters are analyzed for morphology and elements by scanning electron microscopy (SEM) with energy dispersive X-ray, and quartz content by Fourier-transform infrared spectroscopy and Raman spectroscopy. [ABSTRACT FROM AUTHOR]

The SARS-CoV-2 pandemic has resulted in the need for increased surface disinfection. For this purpose, biocides, UV-C radiation, or ozonation can be used. The most commonly used are biocides that can be deposited on the surface with the use of various devices, including foggers. The disinfection efficiency is related to the size of the aerosol droplets formed and their distribution. This paper specifies the distribution of droplet diameters and mean droplet diameters obtained during the use of a commercial fogger. It was shown that the droplet diameters formed were mainly in the range of up to 30–40 μm. A ceramic filter allowed for a larger number of smaller droplets and a limitation in the number of droplets with larger diameters. The results are important in the context of fighting the virus in hard-to-reach places where battery devices can be used. [ABSTRACT FROM AUTHOR]

Airborne fine particulate matter (PM2.5) pollution is known to have adverse effects on human health, and owing to their carcinogenic and mutagenic nature, polycyclic aromatic hydrocarbons (PAHs) are of particular concern. This study investigated the effect of ultraviolet (UV)-induced photocatalysis on the degradation of PAHs in PM2.5, employing titanium dioxide (TiO2)-supporting quartz fibre filters. A TiO2 layer was formed on the quartz fibre filters, and airborne PM2.5 was collected using an air sample at a flow rate of 500 L/min for 24 h. The PM2.5 samples were subsequently irradiated with ultraviolet rays at 1.1 mW/cm2. The amounts of nine targeted PAHs (phenanthrene, PHE; anthracene, ANT; pyrene, PYR; benzo[a]anthracene, BaA; chrysene, CHR; benzo[b]fluoranthene, BbF; benzo[k]fluoranthene, BkF; benzo[a]pyrene, BaP; and benzo[g,h,i]perylene, BgP) gradually decreased during the treatment, with half-lives ranging from 18 h (PHE) to 3 h (BaP), and a significantly greater reduction was found in comparison with the PAHs collected in the control (non-TiO2 coated) quartz fibre filters. However, the degradation rates were much faster when the PAHs were in direct contact with the TiO2 layer. As PM2.5 is a mixture of various kinds of solids, co-existing components can be a rate-determining factor in the UV-induced degradation of PAHs. This was demonstrated by a remarkable increase in degradation rates following the removal of co-existing salts from the PM2.5 using water treatment. [ABSTRACT FROM AUTHOR]

Sampling campaigns indoors have shown that occupants exposed to contaminated air generally exhibit diverse health outcomes. This study intends to assess the deposition rates of total settleable dust and bioburden in the indoor air of dwellings onto quartz fiber filters and electrostatic dust collectors (EDCs), respectively. EDC extracts were inoculated onto malt extract agar (MEA) and dichloran glycerol (DG18) agar-based media used for fungal contamination characterization, while tryptic soy agar (TSA) was applied for total bacteria assessment, and violet red bile agar (VRBA) for Gram-negative bacteria. Azole-resistance screening and molecular detection by qPCR was also performed. Dust loading rates ranged from 0.111 to 3.52, averaging 0.675 μg cm−2 day−1. Bacterial counts ranged from undetectable to 16.3 colony-forming units (CFU) m−2 day−1 and to 2.95 CFU m−2 day−1 in TSA and VRBA, respectively. Fungal contamination ranged from 1.97 to 35.4 CFU m−2 day−1 in MEA, and from undetectable to 48.8 CFU m−2 day−1 in DG18. Penicillium sp. presented the highest prevalence in MEA media (36.2%) and Cladosporium sp. in DG18 (39.2%). It was possible to observe: (a) settleable dust loadings and fungal contamination higher in dwellings with pets; (b) fungal species considered indicators of harmful fungal contamination; (c) Aspergillus section Candidi identified in supplemented media with voriconazole and posaconazole; (d) specific housing typologies and (e) specific housing characteristics influencing the microbial contamination. [ABSTRACT FROM AUTHOR]

Optical spectrometers and sensors have gained enormous importance in metrology and information technology, frequently involving the question of size, resolution, sensitivity, spectral range, efficiency, reliability, and cost. Nanomaterials and nanotechnological fabrication technologies have huge potential to enable an optimization between these demands, which in some cases are counteracting each other. This paper focuses on the visible and near infrared spectral range and on five types of optical sensors (optical spectrometers): classical grating-based miniaturized spectrometers, arrayed waveguide grating devices, static Fabry–Pérot (FP) filter arrays on sensor arrays, tunable microelectromechanical systems (MEMS) FP filter arrays, and MEMS tunable photonic crystal filters. The comparison between this selection of concepts concentrates on (i) linewidth and resolution, (ii) required space for a selected spectral range, (iii) efficiency in using available light, and (iv) potential of nanoimprint for cost reduction and yield increase. The main part of this review deals with our own results in the field of static FP filter arrays and MEMS tunable FP filter arrays. In addition, technology for efficiency boosting to get more of the available light is demonstrated. [ABSTRACT FROM AUTHOR]

Air pollution is an important issue that can have significant implications for human health. Consequently, air quality control is matter of great interest, and the ΕU has established strict legislation with respect to public health protection. A work package of the EMPIR project AEROMET focused on the investigation of traceable validated methods for chemical composition of airborne particulate matter (PM), including heavy metals. Incineration ash typically contains quantities of heavy and toxic metals in excess of the limits imposed for airborne PM, so it provides a candidate source for a Standard Reference Material (SRM). In this work, a method for loading incinerator ash (PM10 and PM2.5 fractions) on quartz filters with a good reproducibility and homogeneity was developed. An intercomparison exercise involving three separate laboratories was conducted for the elemental analysis of the prepared candidate reference material. The filters were treated by acid digestion and analyzed by Inductively Coupled Plasma–Mass Spectrometry (ICP-MS) according to the European standard EN 14902:2005. Eleven elements, including the regulated metals (As, Cd, Ni and Pb), were determined using different ICP-MS instruments and standardization methods. Data evaluation showed a good agreement between the results, with deviations below 10–15%. The development of a Standard Reference Material seems auspicious. [ABSTRACT FROM AUTHOR]

Polarized hyperspectral images can reflect the rich physicochemical characteristics of targets. Meanwhile, the contained plentiful information also brings great challenges to signal processing. Although compressive sensing theory provides a good idea for image processing, the simplified compression imaging system has difficulty in reconstructing full polarization information. Focused on this problem, we propose a two-step reconstruction method to handle polarization characteristics of different scales progressively. This paper uses a quarter-wave plate and a liquid crystal tunable filter to achieve full polarization compression and hyperspectral imaging. According to their numerical features, the Stokes parameters and their modulation coefficients are simultaneously scaled. The first Stokes parameter is reconstructed in the first step based on compressive sensing. Then, the last three Stokes parameters with similar order of magnitude are reconstructed in the second step based on previous results. The simulation results show that the two-step reconstruction method improves the reconstruction accuracy by 7.6 dB for the parameters that failed to be reconstructed by the non-optimized method, and reduces the reconstruction time by 8.25 h without losing the high accuracy obtained by the current optimization method. This feature scaling method provides a reference for the fast and high-quality reconstruction of physical quantities with obvious numerical differences. [ABSTRACT FROM AUTHOR]

Passive air samplers (PASs) have been used for mapping gaseous mercury concentration in extensive areas. In this work, an easy-to-use and -prepare gold nanoparticle (NP)-based PAS has been investigated. The PAS is constituted of a microfibrous quartz disk filter impregnated of gold NP photo-growth on TiO2 NPs (Au@TiO2) and used as gaseous mercury adsorbing material. The disk was housed in a cylinder glass container and subjected to an axial diffusive sampling. The adsorbed mercury was measured by thermal desorption using a Tekran® instrument. Different amounts of Au@TiO2 (ranging between 4.0 and 4.0 × 10−3 mg) were deposited by drop-casting onto the fibrous substrate and assessed for about 1 year of deployment in outdoor environment with a mercury concentration mean of about 1.24 ± 0.32 ng/m3 in order to optimize the adsorbing layer. PASs showed a linear relation of the adsorbed mercury as a function of time with a rate of 18.5 ± 0.4 pg/day (≈1.5% of the gaseous concentration per day). However, only the PAS with 4 mg of Au@TiO2, provided with a surface density of about 3.26 × 10−2 mg/mm2 and 50 μm thick inside the fibrous quartz, kept stability in working, with a constant sampling rate (SR) (0.0138 ± 0.0005 m3/day) over an outdoor monitoring experimental campaign of about 1 year. On the other hand, higher sampling rates have been found when PASs were deployed for a few days, making these tools also effective for one-day monitoring. Furthermore, these PASs were used and re-used after each thermal desorption to confirm the chance to reuse such structured layers within their samplers, thus supporting the purpose to design inexpensive, compact and portable air pollutant sampling devices, ideal for assessing both personal and environmental exposures. During the whole deployment, PASs were aided by simultaneous Tekran® measurements. [ABSTRACT FROM AUTHOR]

The main objective of this research was the determination of the geochemical and mineralogical properties of particulate matter: TSP (total suspended particles) and, especially PM1 (particles with aerodynamic diameter not greater than 1 µm) suspended in the air of a selected urban area in southern Poland. Identification of the emission sources of metals and metalloids bound in TSP and PM1 as well as the assessment of potential risk of urban ambient air to human health using hazard indices was an additional aim of this investigation. The daily TSP and PM1 quartz fiber filters collected during heating season were subjected to mass magnetic susceptibility (χ) measurements, SEM (Scanning Electron Microscopy) observations and geochemical analyses. Obtained results revealed that the concentration of TSP and PM1 well correlated with their mass-specific magnetic susceptibility. The good relationship between the PM concentration and χ suggests that magnetic susceptibility measurements can be a good proxy of low-level atmospheric dust pollution. The rank order of potentially toxic elements (PTE) based on average concentration was Ba > Zn > Al > Fe > Pb > Mn > Ti > Cu > Cr > Ni >As > Cd > V > Tl, both for TSP and PM1. PM1/TSP ratios for PTE concentrations and χ were around or slightly above unity, which indicated that PM1 was the main carrier of PTE (with the exception of cadmium, copper and lead) and technogenic magnetic particles. The non-carcinogenic and carcinogenic risks were confirmed by very high values of human health indices. [ABSTRACT FROM AUTHOR]

This study presents features of airborne culturable bacteria and fungi from three different sites (Lanzhou; LZ; 1520 m ASL, Lhasa; LS; 3640 m ASL and Qomolangma; ZF; 4276 m ASL) representing urban (LZ and LS) and remote sites (ZF) over the Tibetan Plateau (TP). Total suspended particle (TSP) samples were collected with an air sampler (Laoying 2030, China) on a quartz filter. Community structures of bacteria and fungi were studied and compared among three different locations. The average levels of bacterial load in the outdoor air ranged from approximately 8.03 × 101 to 3.25 × 102 CFU m–3 (Colony forming unit per m3). However, the average levels of fungal loads ranged from approximately 3.88 × 100 to 1.55 × 101 CFU m−3. Bacterial load was one magnitude higher at urban sites LZ (2.06 × 102–3.25 × 102 CFU m−3) and LS (1.96 × 102–3.23 × 102 CFU m−3) compared to remote sites ZF (8.03 × 101–9.54 × 101 CFU m−3). Similarly, the maximum fungal load was observed in LZ (1.02 × 101–1.55 × 101 CFU m−3) followed by LS (1.03 × 101–1.49 × 101 CFU m−3) and ZF (3.88 × 100–6.26 × 100 CFU m−3). However, the maximum microbial concentration was observed on the same day of the month, corresponding to a high dust storm in Lanzhou during the sampling period. The reported isolates were identified by phylogenetic analysis of 16S rRNA genes for bacteria and ITS sequences for fungi amplified from directly extracted DNA. Bacterial isolates were mostly associated with Proteobacteria,Eurotiomycetes and Bacillus, whereas fungal isolates were mostly Aspergillus and Alternaria. Overall, this is a pioneer study that provides information about the airborne microbial concentration and composition of three sites over the TP region depending on environmental parameters. This study provided preliminary insight to carry out more advanced and targeted analyses of bioaerosol in the sites presented in the study. [ABSTRACT FROM AUTHOR]

The aim of this paper is to prepare nano-functionalized ceramic foam filters from carbon-bonded alumina. The carbon-bonded filters were produced via the Schwartzwalder process using a two-step approach. The prepared ceramic foam filters were further coated using graphene oxide. Graphene oxide was prepared by the modified Tour method. The C/O of the graphene oxide ratio was evaluated by XPS, EDS and elemental analysis (EA). The amount and type of individual oxygen functionalities were characterized by XPS and Raman spectroscopy. The microstructure was studied by TEM, and XRD was used to evaluate the interlayer distance. In the next step, filters were coated by graphene oxide using dip-coating. After drying, the prepared composite filters were used for the purification of the water containing lead, zinc and cadmium ions. The efficiency of the sorption was very high, suggesting the potential use of these materials for the treatment of wastewater from heavy metals. [ABSTRACT FROM AUTHOR]

In this research, the idea of multicomponent, one-vessel cleaning of syngas through simultaneous dedusting and adsorption is described. Data presented were obtained with the use of a pilot-scale 60 kWth fixed-bed GazEla reactor, coupled with a dry gas cleaning unit where mineral sorbents are injected into raw syngas at 500–650 °C, before dedusting at ceramic filters. The research primarily presents results of the application of four calcined sorbents, i.e., chalk (CaO), dolomite (MgO–CaO), halloysite (AlO–MgO–FeO), and kaolinite (AlO–MgO) for high-temperature (HT) adsorption of impurities contained in syngas from gasification of biomass. An emphasis on data regarding the stability of the filtration process is provided since the addition of coating and co-filtering materials is often necessary for keeping the filtration of syngas stable, in industrial applications. [ABSTRACT FROM AUTHOR]

Trace metal concentrations in PM10 were measured in an urban–industrial site in León, Mexico in three different seasons. PM10 were collected in quartz fiber filters of 47 mm diameter using low volume equipment operating with a controlled flow of 5 L min−1 over 24 h. Mass concentrations were gravimetrically determined and it was found that PM10 samples showed values in excess of the Mexican standard and the established values by WHO during cold dry and warm dry seasons. Morphology of selected particles was studied by SEM-EDS analysis, and the elemental composition was determined. Collected samples were analyzed by atomic absorption spectrometry in order to quantify ambient air concentrations of some trace metals (Cu, Co, Zn, Cd, Fe, Mg, and Mn). Median concentrations of trace metals showed the maximum value for iron (3.079 μgm−3) and the minimum value for Cd (0.050 μgm−3) over the entire period. From the meteorological analysis, it was found that sources located SW and ESE of the sampling site contributed to the levels of trace metals in PM10 in the studied site. The health risk assessment found that the population of León is at increased lifetime risk of experiencing cancer because of exposure to these concentrations of PM10 and their trace metal content. [ABSTRACT FROM AUTHOR]

Exhaust gases from internal combustion engines contain fine carbon particles. If a biofuel is used as the engine fuel for low-carbon emission, the exhaust gas still contains numerous carbon particles. For example, the ceramic filters currently used in automobiles with diesel engines trap these carbon particles, which are then burned during the filter regeneration process, thus releasing additional CO2. Electrostatic precipitators are generally suitable to achieve low particle concentrations and large treatment quantities. However, low-resistivity particles, such as carbon particles, cause re-entrainment phenomena in electrostatic precipitators. In this study, we develop an electrostatic precipitator to collect fine carbon particles. Woodceramics were used for the grounded electrode in the precipitator to collect carbon particles on the carbon electrode. Woodceramics are eco-friendly materials, made from sawdust. The electrical resistivity and surface roughness of the woodceramics are varied by the firing temperature in the production process. Woodceramics electrodes feature higher resistivity and roughness as compared to stainless-steel electrodes. We evaluated the influence of woodceramics electrodes on the electric field formed by electrostatic precipitators and calculated the corresponding charge distribution. Furthermore, the particle-collection efficiency of the developed system was evaluated using an experimental apparatus. [ABSTRACT FROM AUTHOR]

The instability of diafiltration is a widespread problem in the practical application of microporous ceramic filtration membranes. In this paper, a series of microporous ceramic filter membranes were prepared using inexpensive standard sand and river sand as matrix materials. Semi-empirical formula for the effective permeability radius of ceramic membranes with respect to time was established from analysis of the response mechanism between water flow and material properties. Finally, on the basis of theoretical analysis, some measures were proposed to improve permeate flux. The experimental results showed that during the initial stage of filtration, the microporous ceramic filter membrane had a large change in permeate flux, and during the late stage of filtration, permeate flux tended to be stable. Over time, open porosity and closed porosity changed the actual seepage area of the ceramic membrane, and this affected the stability of permeate flux and final stable permeate flux. The roughness of the inner wall of microporous ceramic pores affected the hydraulic loss coefficient, and this controlled the outflow process. Trace elements that were rich in sand produced a large amount of glass phase after sintering. The glass phase was rich in polar groups and formed a temporary hydrogen bond with the small flow of water molecules. It led to an increase in viscous resistance effect of the side wall along the water flow and the extent of the permeate flux of the ceramic membrane changed with time. [ABSTRACT FROM AUTHOR]

To evaluate the feasibility of the Sunset semicontinuous organic and elemental carbon (OC/EC) monitor, the U.S. Environmental Protection Agency (EPA) sponsored the deployment of this monitor at Chemical Speciation Network (CSN) sites with OC and EC measurements via quartz fiber filter collection in Chicago, Illinois; Houston, Texas; Las Vegas, Nevada; St. Louis, Missouri; Rubidoux, California; and Washington, D.C. Houston, St. Louis, and Washington also had collocated Aethalometer black carbon (BC) measurements. Sunset OC generally compared well with the CSN OC (r2 = 0.73 across five sites); the Sunset/CSN OC ratio was, on average, 1.06, with a range among sites of 0.96 to 1.12. Sunset thermal EC and CSN EC did not compare as well, with an overall r2 of 0.22, in part because 26% of the hourly Sunset EC measurements were below the detection limit. Sunset optical EC had a much better correlation to CSN EC (r2 = 0.67 across all sites), with an average Sunset/CSN ratio of 0.90 (range of 0.7 to 1.08). There was also a high correlation of Sunset optical EC with Aethalometer BC (r2 = 0.77 across all sites), though with a larger bias (average Sunset/Aethalometer ratio of 0.56). When the Sunset instrument was working well, OC and OptEC data were comparable to CSN OC and EC. [ABSTRACT FROM AUTHOR]

Magneto-elasto-electric (ME) coupling heterostructures, consisting of piezoelectric layers bonded to magnetostrictive ones, provide for a new class of electromagnetic emitter materials on which a portable (area ~ 16 cm2) very low frequency (VLF) transmitter technology could be developed. The proposed ME transmitter functions as follows: (a) a piezoelectric layer is first driven by alternating current AC electric voltage at its electromechanical resonance (EMR) frequency, (b) subsequently, this EMR excites the magnetostrictive layers, giving rise to magnetization change, (c) in turn, the magnetization oscillations result in oscillating magnetic fields. By Maxwell's equations, a corresponding electric field, is also generated, leading to electromagnetic field propagation. Our hybrid piezoelectric-magnetostrictive transformer can take an input electric voltage that may include modulation-signal over a carrier frequency and transmit via oscillating magnetic field or flux change. The prototype measurements reveal a magnetic dipole like near field, demonstrating its transmission capabilities. Furthermore, the developed prototype showed a 104 times higher efficiency over a small-circular loop of the same area, exhibiting its superiority over the class of traditional small antennas. [ABSTRACT FROM AUTHOR]