Search

Mandibular reconstruction is essential for restoring both function and aesthetics after segmental resection due to tumoral pathology. This study aimed to conduct a comparative analysis of three reconstruction strategies for defects resulting from segmental mandibular resection, utilizing finite element analysis (FEA). Methods: A digital model of the mandible was created from CBCT data and optimized for FEA. Three reconstruction scenarios were simulated: fixation with a titanium plate, reconstruction with an autogenous fibular graft stabilized with the same titanium plate, and fixation with a customized PEEK plate. Various plate thicknesses were analyzed to determine the stress and deformation patterns under masticatory loads. Results: Titanium plates provided superior mechanical stability but showed stress concentrations near screw fixation points. The addition of autogenous bone grafts reduced stress on the plate and improved structural integrity. PEEK plates exhibited reduced stress shielding and better load distribution, but thinner designs were prone to deformation. Minimum recommended thicknesses of 1.2 mm for titanium plates and 1.8 mm for PEEK plates were identified by FEA. Conclusions: This study highlights the importance of material selection and patient-specific design in mandibular reconstruction. Autogenous bone grafts combined with titanium plates demonstrated the best biomechanical outcomes, while PEEK plates offer a promising alternative, particularly for patients where grafting is contraindicated. [ABSTRACT FROM AUTHOR]

It was assumed that only autogenous bone had appropriate osteoconductive and osteoindutive properties for bone regeneration, but this assumption has been challenged. Many studies have shown that synthetic biomaterials must be considered as the best choice for guided bone regeneration. The objective of this work is to compare the performances of nanohydroxyapatite/β-tricalcium phosphate (n-HA/β-TCP) composite and autogenous bone grafting in bone regeneration applications. The composite was characterized by scanning electron microscopy (SEM) and used as an allograft in bone defects formed in adult Wistar rats. The bone defects in the dorsal cranium were grafted with autogenous bone on one side and the n-HA/β-TCP composite on the other. Histomorphometry evaluation via different staining methods (Goldner trichrome, PAS, and Sirius red) and TRAP histochemistry were performed. Immunohistomorphometries of OPN, Cathepsin K, TRAP, acid phosphatase, VEGF, NFκ-β, MMP-2, MMP-9, and TGF-β were carried out. The RT-PCR method was also applied to to RANK-L, Osteocalcine, Alcaline Phosphatase, Osterix, and Runx2. The results showed that for all morphometric evaluations with the different staining methods, histochemistry, and immunohistochemistry, VEGF and NFκ-β were higher in the n-HA/β-TCP composite group than in the autogenous bone graft group. The RT-PCR markers were higher in the autogenous bone group than in the n-HA/β-TCP composite group. The n-HA/β-TCP composite exhibited enhanced cell–matrix interactions in bone remodeling, higher adhesion, proliferation, and differentiation, and increased vascularization. These results suggest that the n-HA/β-TCP composite induces faster bone formation than autogenous bone grafting. [ABSTRACT FROM AUTHOR]

Bone augmentation using artificial bone is an important option in dental defect prostheses. A bone substitute using carbonate apatite (CO3Ap), an inorganic component of bone, was reported to have promising bone formation and bone replacement ability. However, the osteoinductivity of artificial bone is less than autogenous bone (AB). In this study, CO3Ap with AB is demonstrated as a clinically effective bone substitute. For in vitro experiments, an osteoclast-like cell (RAW-D) was cultured in the presence of AB, CO3Ap, or both (Mix), and the number of osteoclasts was evaluated. Osteoblasts were also cultured under the same conditions, and the number of adherent cells was evaluated. For in vivo experiments, a few holes were created in the rat tibia and AB, CO3Ap, or Mix were added. At 0, 14, and 21 days, the tissue morphology of the wound area was observed, and the thickness of the cortical bone was measured. In vitro, Mix did not increase the number of osteoclasts or osteoblasts. However, in vivo, the rate of bone replacement remarkably increased with Mix on dome-shape. A bone-grafting material combining osteoinductive AB with abundant artificial bone is expected to be clinically easy to use and able to form bone. [ABSTRACT FROM AUTHOR]

Purpose: The objective of this retrospective study was to evaluate the long-term clinical outcomes of bone regeneration procedures using algae-derived plant hydroxyapatite (Algipore® FRIOS®) compared with demineralized anorganic bovine bone (Bio-Oss®), in combination with autologous blood-derived PRP. Materials and Methods: Partially edentulous patients with severe atrophy of posterior maxillary treated by means of the split bone technique in a two-stage grafting procedures were observed for up to seven years after implants placement. After surgeries, the natural porous fluorohydroxyapatite (FHA) (Algipore® FRIOS®; Group, n = 29) or anorganic bovine bone (Bio-Oss® Group, n = 28) with autogenous bone in a 50:50 composite ratio with PRP, were administered in a 2.8-mm critical-size defect (CSD). Four months later, implants were placed at second-stage surgery. Results: A sample of fifty-seven consecutive patients who required sinus augmentation was included in the study, and 57 implants were placed. There was no drop out or loss of follow-up of any case. Clinical and radiographic examinations revealed a comparable pattern of newly formed bone in both groups after seven years of functional loading for implants placed after sinus augmentation using porous fluorohydroxyapatite and anorganic bovine bone. No significant difference in marginal bone loss was found around implants in both groups. Conclusions: The favorable implant outcomes suggest both biomaterials are suitable for sinus grafting in severely atrophic maxillae. [ABSTRACT FROM AUTHOR]

In the case of multiple hopeless teeth and severe bone loss, a conventional healing protocol of 3–4 months has been recommended to prevent the possibility of infection or unpredictable resorption of grafted bone during consolidation of the extraction socket. The use of a provisional denture is inevitable in the case of delayed implant placement, which is a common risk factor for wound dehiscence after a bone graft. Although autogenous bone is still the gold standard for bone grafting because of its excellent biocompatibility and osteogenic potential, there has been controversy in the unpredictable resorption of autogenous bone grafting. We present a case of successful maxillary rehabilitation without the use of provisional dentures by immediate implant placement, with early loading accompanying an extensive autogenous bone graft. [ABSTRACT FROM AUTHOR]

The objective of this study was to investigate a bone graft substitute containing carbonate apatite (CO3Ap) to analyze bone replacement and the state of bone formation in vitro and in vivo compared with autogenous bone (AB) or control. An osteoclast precursor cell line was cultured with AB or CO3Ap, and morphological analysis using scanning electron microscopy and a tartrate-resistant acid phosphatase activity assay were performed. The right maxillary first and second molars of Wistar rats were extracted and compensated by AB or CO3Ap granules. Following implantation, the bone formation state was evaluated after 3, 5, 7, 14, and 28 days of surgery by micro-computed tomography and immunohistostaining. The osteoclast-like cell morphology was typical with many cell protrusions in the AB and CO3Ap groups. Additionally, the number of osteoclast-like cells formed in the culture increased in each group; however, there was no significant difference between the AB and CO3Ap groups. Five days after tooth extraction, osteoclasts were observed near CO3Ap. The bone thickness in the CO3Ap group was significantly increased than that in the control group and the bone formation in the CO3Ap group increased by the same level as that in the AB group. CO3Ap is gradually absorbed by osteoclasts in the extraction socket and is easily replaced by alveolar bone. The process of bone replacement by osteoclasts is similar to that of autologous bone. By observing the process of bone replacement in more detail, it may be possible to gain a better understanding of the bone formation and control the amount of bone after surgery. [ABSTRACT FROM AUTHOR]

The combination of enamel matrix derivative (EMD) with an autogenous bone graft in periodontal regeneration has been proposed to improve clinical outcomes, especially in case of deep non-contained periodontal defects, with variable results. The aim of the present systematic review and meta-analysis was to assess the efficacy of EMD in combination with autogenous bone graft compared with the use of EMD alone for the regeneration of periodontal intrabony defects. A literature search in PubMed and in the Cochrane Central Register of Controlled Trials was carried out on February 2019 using an ad-hoc search string created by two independent and calibrated reviewers. All randomized controlled trials (RCTs) comparing a combination of EMD and autogenous bone graft with EMD alone for the treatment of periodontal intrabony defects were included. Studies involving other graft materials were excluded. The requested follow-up was at least 6 months. There was no restriction on age or number of patients. Standard difference in means between test and control groups as well as relative forest plots were calculated for clinical attachment level gain (CALgain), probing depth reduction (PDred), and gingival recession increase (RECinc). Three RCTs reporting on 79 patients and 98 intrabony defects were selected for the analysis. Statistical heterogeneity was detected as significantly high in the analysis of PDred and RECinc (I2 = 85.28%, p = 0.001; I2 = 73.95%, p = 0.022, respectively), but not in the analysis of CALgain (I2 = 59.30%, p = 0.086). Standard difference in means (SDM) for CALgain between test and control groups amounted to −0.34 mm (95% CI −0.77 to 0.09; p = 0.12). SDM for PDred amounted to −0.43 mm (95% CI −0.86 to 0.01; p = 0.06). SDM for RECinc amounted to 0.12 mm (95% CI −0.30 to 0.55. p = 0.57). Within their limits, the obtained results indicate that the combination of enamel matrix derivative and autogenous bone graft may result in non-significant additional clinical improvements in terms of CALgain, PDred, and RECinc compared with those obtained with EMD alone. Several factors, including the surgical protocol used (e.g. supracrestal soft tissue preservation techniques) could have masked the potential additional benefit of the combined approach. Further well-designed randomized controlled trials, with well-defined selection criteria and operative protocols, are needed to draw more definite conclusions. [ABSTRACT FROM AUTHOR]