Search

Regulation (EU) 2020/852 of the European Parliament, also known as the Taxonomy Regulation, facilitates environmentally sustainable investments. It is part of the concept of the European Green Deal and a 'tool' for financial institutions, enterprises, and investors, facilitating the assessment of the environmental impact of a particular project. The Regulation contains the criteria an activity must meet to be considered environmentally sustainable. The role of the Taxonomy Regulation is to enable the flow of public and private capital towards ecological and sustainable activities. The document does not need to be implemented into the legal order of individual EU member-states, which results in its direct application. The main financial instruments enabling the achievement of the goals of the Taxonomy Regulation may be green bonds and other forms of capital raising by entrepreneurs and forest ownership structures. The assumption of the Regulation is to achieve the principles of sustainable environmental activity when spending funds obtained from private investors. It is an issue of key significance to identify the areas of management and financial accounting in the operational activities of forest enterprises that can be qualified for the Taxonomy Regulation. Forestry activities, including the processes mentioned therein, the objectives of the New EU Forest Strategy, and the LULUCF Regulation, are to play an essential role in reducing greenhouse gas emissions. The role of forestry in the supply chain in its broad sense is also considered. Forestry and forest management can receive capital for sustainable development due to the threat resulting from exclusions that strengthen the protective function of the forest (the protection of biodiversity). These processes will occur at the expense of production and numerous social functions. [ABSTRACT FROM AUTHOR]

Silvicultural processes are an essential issue of rational forest management. Both man-made (artificial) and natural restoration methods are used in European forestry. A study of the cost drivers of forest restoration from the early stages of land clearing to cultivation was conducted for Scots pine tracts in a coniferous forest habitat. The cost data were tested for homogeneity of variance (Levene's test) and normality (Shapiro–Wilk test) using a significance level of α = 0.05. The research indicated that the cost of artificial restoration (planting) of a pine forest is about 30% higher than the cost of natural restoration. The research also indicated that the main cost driver (about 35%) of the artificial restoration process was seedlings and planting costs. Further, the viability of supplementing natural planting with artificial planting was confirmed. [ABSTRACT FROM AUTHOR]

Forest and wood biomass represent a sustainable reservoir of raw materials and energy, offering a viable alternative to fossil fuels. These resources find extensive use in producing bioproducts, including solid wood and wood materials. The judicious exploitation of forest and wood biomass can be pivotal in reducing carbon emissions and securing material and energy independence. The business viability of producing valuable goods from woody biomass hinges on ensuring its sustained availability. This necessitates access to high-quality biomass at a minimal cost, demanding the efficient design of wood-biomass-distribution logistics. Furthermore, it is imperative to give equal weight to social and ecological considerations in shaping the forest- and wood-biomass-distribution logistics, thereby ensuring the sustainable utilization of this renewable raw material source. This article presents research focused on the business optimization of distribution logistics for specific forms of forest biomass used in wood material production. While most studies have primarily concentrated on the business or ecological issues of biomass utilization, this article offers a comprehensive insight by addressing business, ecological, and social facets in assessing and optimizing wood-biomass-distribution logistics. Multi-stakeholder life-cycle-assessment optimization takes into account the reduction of greenhouse gases as an ecological metric, with production costs and capital expenditure forming the business metrics. At the same time, the generation of employment opportunities is commonly regarded as the pivotal social criterion. There remains a necessity for further exploration into the potential social impacts of forest biomass utilization. Additionally, developing enhanced methodologies and decision-support tools for scheduling wood-biomass-distribution logistics that holistically consider business, ecological, and social criteria is an essential ongoing task. [ABSTRACT FROM AUTHOR]

Simple Summary: Controlled clinical trials are one of the most important sources of medical knowledge, but their results are not always identical to those observed later in normal day-to-day practice. Therefore, real-world studies are needed to investigate those differences. The targeted agents cetuximab and panitumumab, combined with chemotherapy, are an effective treatment for metastatic colon cancer, provided that certain mutations have not occurred in cancer cells (namely activating mutations in KRAS, NRAS or BRAF genes). Recently, it was found that the outcomes of the aforementioned therapy differ depending on which part of the colon the tumour originates from. We conducted a real-world study on 842 patients treated at 16 cancer centres. The study confirmed that metastatic cancer that originated in the right part of the colon has a lower response to cetuximab or panitumumab-based treatment. Anti-EGFR antibodies combined with chemotherapy doublets are a cornerstone of the upfront treatment of colorectal cancer. RAS and BRAF mutations are established negative predictive factors for such therapy. The primary tumour located in the proximal colon has recently emerged as another negative predictive factor. We have conducted a retrospective multicentre study to collect data on real-world population characteristics, practice patterns, and outcomes in patients with metastatic colorectal cancer treated in a first-line setting with either cetuximab or panitumumab in combination with either FOLFOX or FOLFIRI chemotherapy. The presented analysis focuses on the impact of the primary tumour location. 126 of 842 patients analysed (15.0%) had proximal primary. It was associated with a lower BMI at diagnosis, mucinous histology, and peritoneal metastases. It was also associated with inferior treatment outcomes in terms of response ratio: 59.4% vs. 74.22% (odds ratio [OR] 0.51, 95% CI 0.33–0.78, p = 0.010), and median depth of response: −36.7% vs. −50.0% (p = 0.038). There was only a borderline non-significant trend for inferior PFS in patients with proximal tumours. OS data was incomplete. The presented analysis confirms the negative impact of tumour sidedness on the efficacy of an upfront anti-EGFR-chemotherapy combination and provides valuable data on real-world population characteristics. [ABSTRACT FROM AUTHOR]

The utilization of primary and secondary woody biomass resources, despite controversies, is being promoted to reduce dependence on fossil fuels and due to the need to diversify energy sources and ensure energy security in European Union countries. Forest biomass is one of the renewable and sustainable energy sources that can be used for electricity, heat, and biofuel production. In the context of the ongoing energy crisis in Europe, an attempt was made to analyze the production and consumption of woody biomass for energy purposes (fuel wood, chips, and pellets). Specifically, an analysis of similarities between European countries in terms of biomass utilization was conducted. The analysis was complemented by a forecast of primary biomass production in selected European countries. The similarity analysis was conducted using the Ward method. Artificial neural networks (ANNs), including multi-layer feedforward perceptron (MLP) and radial basis function (RBF) models, were used to predict fuelwood extraction. The study showed that woody biomass remains an important source of bioenergy in Europe, and its significance as a strategic resource guaranteeing energy security is likely to increase. Fuel wood harvesting in Europe generally shows an upward trend, particularly in the Czech Republic, Germany, Estonia, Denmark, and the UK. A decreasing trend was observed in France, Spain, Greece, and Cyprus. The analysis revealed differences between countries in terms of woody biomass consumption. The ANN-based forecasts of fuelwood supply generally showed an increase in primary biomass harvesting. [ABSTRACT FROM AUTHOR]

One of the 10 priorities of the Green New Deal is sustainable transportation. It should be considered in the perspective of long-term ecological and economic sustainability, according to the trend of opportunities for sustainable development. The economic and environmental aspects of transportation related to the harvesting and movement of timber play a special role in the energy cost and their environmental impact per distance of raw material supply. The principles of rational and energy-efficient use of transportation equipment play a key role in the movement of raw timber. These are influenced by the availability of timber resources, limitation of vehicle payloads, reduction of energy consumption expressed in terms of reduction of fuel combustion, or current legal and road regulations for timber transportation. The paper evaluates economic and environmental factors in relation to the demand for fuels necessary for the implementation of road transportation of softwood timber. The aim of this paper was to present the current situation of the use of transportation means in the movement of bulky timber, as well as opportunities to optimize fuel consumption and CO2 emissions, affecting the economic and environmental effects. Previous studies on fuel consumption in the transportation of roundwood indicate irrational use of vehicles. This indicates unused payload capacity increasing energy inputs expressed in fuel consumption. It has been empirically investigated that this is the result of improperly approved transport sets adapted to the material being transported. In addition, it was shown that there is a clear correlation between the vehicle payload utilization rate and economic and environmental factors. The results of this study point to the potential to increase the use of transportation vehicles for timber transportation and reduce fuel combustion and CO2 emissions by 7–20%. [ABSTRACT FROM AUTHOR]

This paper presents the application of prediction in the analysis of market price volatility in Polish conditions of wood processing by-products in the form of biomass. The ARIMA model, which takes into account cyclical, seasonal, irregular fluctuations of historical data on the basis of which the forecast and long-term trends of selected wood products were made, was used in predicting prices. Comparisons were made between the ARIMA prediction method and the multiplicative Winters–Holt model. During the period studied (2017–2022), the changes in the market price of biomass were characterized by a wide spread of values. On average, the price of these products increased from 2017 to the end of 2022 by 125%. The price prediction analysis showed seasonal fluctuations in the case of wood chips. The uncertainty in price prediction is due to changes in supply resulting from the influence of global factors. The Diebold–Mariano test of matching accuracy confirms that the price prediction of the analyzed by-product sorts using the ARIMA and WH models is possible. The conclusion reached by comparing these two methods is that each can be used under certain market conditions of certain assortments. In the case of a stable wood product, the choice of the ARIMA model should be resolved, while in the case of price volatile products, WH will be a better choice. The difference between the predicted and actual price with ARIMA ranged from 2.4% to 11.6% and for WH from 3.7% to 29.8%. [ABSTRACT FROM AUTHOR]

The majority of the existing studies on timber price forecasting are based on ARIMA/SARIMA autoregressive moving average models, while vector autoregressive (VAR) and exponential smoothing (ETS) models have been employed less often. To date, timber prices in primary timber markets have not been forecasted with ANN methodology. This methodology was used only for forecasting lumber futures. Low-labor-intensive and relatively simple solutions that can be used in practice as a tool supporting decisions of timber market participants were sought. The present work sets out to compare RBF and MLP artificial neural networks with the Prophet procedure and with classical models (i.e., ARIMA, ETS, BATS, and TBATS) in terms of their suitability for forecasting timber prices in Poland. The study material consisted of quarterly time series of net nominal prices of roundwood (W0) for the years 2005–2021. MLP was found to be far superior to other models in terms of forecasting price changes and levels. ANN models exhibited a better fit to minimum and maximum values as compared to the classical models, which had a tendency to smooth price trends and produce forecasts biased toward average values. The Prophet procedure led to the lowest quality of projections. Ex-post error-based measures of prediction accuracy revealed a complex picture. The best forecasts for alder wood were obtained using the ETS model (with RMSE and MAE values of approx. 0.38 € m−3). ETS also performed well with respect to beech timber, although in this case BATS was just as good in terms of RMSE, while the difference between ETS and neural models amounted to as little as 0.64 € m−3. Birch timber prices were most accurately predicted with BATS and TBATS models (MAE 0.86 € m−3, RMSE 1.04 € m−3). The prices of the most popular roundwood types in Poland, i.e., Scots pine, Norway spruce, and oaks, were best forecasted using ANNs, and especially MLP models. Among the neural models for oak (MAE 4.74 € m−3, RMSE 8.09 € m−3), pine (MAE 2.21 € m−3, RMSE 2.83 € m−3), beech (MAE 2.31 € m−3, RMSE 2.70 € m−3), alder (MAE 1.88 € m−3, RMSE 2.40 € m−3), and spruce (MAE 2.44 € m−3, RMSE 2.58 € m−3), the MLP model was the best (the RBF model for birch). Of the seven models used to forecast the prices of six types of wood, the worst results were obtained for oak wood, while the best results were obtained for alder. [ABSTRACT FROM AUTHOR]

The aim of the study was to test the applicability of forecasting in the analysis of the variability of prices and supply of wood in Poland. It relies on the autoregressive integrated model (ARIMA) that takes into account the level of cyclic, seasonal, and irregular fluctuations and the long-term trend as tools for the assessment of the predictions of the prices of selected medium-sized wood assortments. Elements of the time series were determined taking into account the cyclical character of the quarterly distribution. The data included quarterly information about the supply (amount) and prices (value) of wood sold by state forests in the years 2018–2022. The analysis was conducted for the most popular assortments: logging slash (M2, M2ZE), firewood S4, and medium-sized wood S2AP. In the period studied (years 2018–2022), the average rate of price variation was widely scattered. The average rate of price variation for the M2ZE assortment amounted to 7%. The average rate for M2 assortment was 1%, while the medium-sized S2AP assortment displayed the greatest variation of 99%. This means that between 2018 and the present, the price increased by nearly 100%. No major fluctuations were observed for the S4 assortment and its average rate of variation amounted to 0%. The analysis found seasonal variation was observed only for S4 firewood, the price of which went up each year in October, November, and December. For this reason, the forecast was made with the seasonal autoregressive integrated moving average (SARIMA) version of the model. It is difficult to forecast the price of wood due to variations in the market and the impact of global factors related to fluctuations in supply. [ABSTRACT FROM AUTHOR]

This article deals with the issue of using social media to promote sustainable forest management. Major forest managers see significant value in combining various social media channels and implementing a communication campaign. With the help of social media, it is possible to raise public awareness of rational forest management. The purpose of this research was to conduct an in-depth theoretical and research analysis of the use of increasingly common communication channels such as social media. The research and analysis period was set from 1–26 July 2018. In order to evaluate the effectiveness of communication activities, the social media survey was repeated from 1–21 January 2019 and from 1–21 July 2020. The control analysis focused on the use of the main social media channels. The article assumed the hypothesis of conscious actions in the communication of forest management institutions in social media to communicate the rational use of forest resources. The hypothesis was positively verified on the basis of quantitative and qualitative studies of nonparticipatory observation for selected social media (Facebook, Instagram) and analysis of data contained in social media channels. The pilot study was conducted on 45 forestry entities from Poland. The results of the survey indicate the growing use of social media to communicate with the public about forest management. The dominant share of respondents consider social media as effective channels for forest education. Facebook is the most popular channel for conducting dialogue with the public. The results of the qualitative survey confirm the superiority of a graphic or mixed form of information presentation over the written form alone. This confirms the observed trends of increasing use of infographics, especially in communication with younger generations. [ABSTRACT FROM AUTHOR]

The purpose of this study was to provide an overview of the public perception of the increase in forest biomass production, particularly in Poland, in the context of global and European Union (EU) climate and energy policy directions. Trends regarding the justification of biomass production in the EU and the world were also analyzed. The study compared the results of public sentiment surveys concerning the use of biomass in Poland as a member state of the European Union. The results are presented in tabular and graphical form. Data were obtained from analyses of social websites, study reports, and information social media in Poland. This study shows an increase in the negative perception of biomass use nationally and globally. It can be concluded that the increasing trend of forest biomass extraction resulted from the growing demand for green energy sources. Changes in European Union policy affected the popularization of biomass production worldwide as a result of growing energy demand. The use of renewable energy sources is necessary to reduce environmental degradation and secure society's growing energy needs. It is necessary to increase the flow of information about the importance of forest biomass for the environmental aspects of society in order to gain acceptance of the EU's promoted direction of stable renewable energy. [ABSTRACT FROM AUTHOR]

Currently, woodchips and logging residues form the greatest share of biomass fuels used to generate heat in combined heat and power plants. They are supplied from various regions of the EU. The calorific values of the wood species used as biomass may vary significantly depending on the moisture and composition of the fuel, harvest seasonality, location, and other factors. This article presents the main resources of forest biomass and its characteristic features, as well as the calorific value of woodchips depending on the moisture content. Our research is based on the source data of forest resources from the State Forests National Forest Holding (PGLLP) in Poland. The research conducted by the main forestry enterprise in Poland covered a period of four years. The data on the harvesting of woodchips and logging residues converted into the calorific values of biomass were based on our research and a review of reference publications. Standard methods were used in the research, which included an analysis of the species and assortment structure of the forest biomass of energetic significance that was available for use. The research showed that the moisture content of the woodchips and lump wood was about 30%. The average annual energy value of the wood in the total area of forest resources was 0.07 GJ/ha, whereas the highest value was 0.14 GJ/ha. Between 2018 and 2021, the average energy resources of forest biomass in Poland increased from 351.8 TJ to 498.4 TJ. [ABSTRACT FROM AUTHOR]

In this article, we present the possibility of applying the concept of elasticity in the system of sustainable energy development through the use of wood biomass. We used a dual (socio-ecological and economic) approach to sustainable energy development. The research was carried out using the methods of reduction reasoning, scientific observation, and examination of source documents. We identified crisis threats in the context of sustainable energy development. Then, we analyzed the supply of wood biomass in Poland, taking into account its geographical location. As a result, we identified and characterized the causal relationships between the assumptions of the concept of resistance and the sustainable development of energy with the use of wood biomass. We found that the concepts of resilience can be adapted to assessing energy sustainability. This adaptation is based on resilience, flexibility, and strategic ability to revitalize the country. We found that five key threats (extreme weather events, climate breakdown, pollution, infectious diseases, loss of biodiversity) affect both the energy-sustainability system and forest management, and the relationship is two-way. We show that the production of forest biomass is compatible with modern forest management and supports the implementation of sustainable energy development, which takes place under the concept of resilience. [ABSTRACT FROM AUTHOR]

(1) Wood is a widely available raw material on the market, which satisfies the industrial demand and which is used both as a source of biomass for the wood materials industry in a broad sense and for energy-supplying purposes. These areas prove the functional values and the possibilities of the directional use of low-quality wood products. One of the factors influencing the overall balance of the wood biomass is the form and quality of the wood material that cannot be further processed mechanically. This study was conducted to determine the influence of this material by presenting the dependence between the level of wood biomass resources and the conditions of wood acquisition and processing in Poland. (2) The basic directions of biomass acquisition were verified in correlation with the level of its acquisition from forest areas and with the form of by-products generated by sawmills. The research was based on the data from reference publications and analysis of the processing of raw wood in sawmills. The research was conducted on raw hardwood and softwood from coniferous and deciduous forests in Poland. (3) The research confirmed the influence of the processing method on the form and share of by-products. It also showed that the form of the wood biomass obtained was influenced by the region of Poland. (4) The research showed that the regionalisation and wood processing directions were correlated with the structure of the wood biomass acquired. [ABSTRACT FROM AUTHOR]

Background: Resources of dying and dead trees, decaying fragments of stems, stumps and branches, i.e., coarse woody debris (CWD), are an important structural element of biocenoses and are drivers of biodiversity. The aim of this study was to describe assemblages of saproxylic beetles in pine stands of western Poland in view of dead wood resources. We present faunistic (species identity) and quantitative (species and individual counts) data from two types of stands: 1. unmanaged pine stands, in which no trees have been extracted for over 30 years, with processes connected with tree dying and self-thinning of stands being undisturbed, 2. managed pine stands, in which routine tending operations extracting trees are performed in accordance with forest management plans and naturally dying trees are removed in the course of tending and sanitary logging; Methods: Beetles were captured in the years 2013–2014 using window flight traps. Assemblages of saproxylic beetles were assessed based on the indices of dominance, diversity (the Shannon–Weiner index), and species richness (Margalef's index) as well as the estimated habitat fidelity index, feeding habits, and zoogeographical distribution. Similarity between the assemblages was evaluated applying cluster analysis. Dependence between dead wood resources and the diversity and species richness indices were analysed; Results: A total of 2006 individuals classified to 216 species were captured. Assemblages show considerable similarity on the local scale. Higher values of species diversity indicators were observed in unmanaged stands, in which no sanitation cuttings are performed; Conclusions: The decision to refrain from sanitation logging in pine monocultures results in increased CWD resources, which nevertheless does not lead to a marked increase in the values of biodiversity indicators. Unmanaged stands were characterised by a high share of zoophagous, mycetophagous, and saproxylic species. In contrast, managed stands were characterised by a high share of xylophagous beetles. [ABSTRACT FROM AUTHOR]